1 June 2020 in Transportation Research Part C: Emerging Technologies
8 October 2020 in IEEE Intelligent Transportation Systems Magazine
1 November 2019 in Transportation Research Part A: Policy and Practice
13 January 2021 in Journal of Advanced Transportation
Managed lanes, such as a dedicated lane for connected and automated vehicles (CAVs), can provide not only technological accommodation but also desired market incentives for road users to adopt CAVs in the near future. In this paper, we investigate traffic flow characteristics with two configurations of the managed lane across different market penetration rates and quantify the benefits from the perspectives of lane-level headway distribution, fuel consumption, communication density, and overall network performance. The results highlight the benefits of implementing managed lane strategies for CAVs: (1) A dedicated CAV lane significantly extends the stable region of the speed-flow diagram and yields a greater road capacity. As the result shows, the highest flow rate is 3400 vehicles per hour per lane at 90% market penetration rate with one CAV lane. (2) The concentration of CAVs in one lane results in a narrower headway distribution (with smaller standard deviation) even with partial market penetration. (3) A dedicated CAV lane is also able to eliminate duel-bell-shape distribution that is caused by the heterogeneous traffic flow. (4) A dedicated CAV lane creates a more consistent CAV density, which facilitates communication activity and decreases the probability of packet dropping.
6 September 2015 in Journal of Sensors
This paper presents a low-cost and energy-saving urban mobility monitoring system based on wireless sensor networks (WSNs). The primary components of the proposed sensor unit are a Bluetooth sensor and a Zigbee transceiver. Within the WSN, the Bluetooth sensor captures the MAC addresses of Bluetooth units equipped in mobile devices and car navigation systems. The Zigbee transceiver transmits the collected MAC addresses to a data center without any major communications infrastructures (e.g., fiber optics and 3G/4G network). A total of seven prototype sensor units have been deployed on roadway segments in Newark, New Jersey, for a proof of concept (POC) test. The results of the POC test show that the performance of the proposed sensor unit appears promising, resulting in 2% of data drop rates and an improved Bluetooth capturing rate. This paper presents a low-cost and energy-saving urban mobility monitoring system based on wireless sensor networks (WSNs). The primary components of the proposed sensor unit are a Bluetooth sensor and a Zigbee transceiver. Within the WSN, the Bluetooth sensor captures the MAC addresses of Bluetooth units equipped in mobile devices and car navigation systems. The Zigbee transceiver transmits the collected MAC addresses to a data center without any major communications infrastructures (e.g., fiber optics and 3G/4G network). A total of seven prototype sensor units have been deployed on roadway segments in Newark, New Jersey, for a proof of concept (POC) test. The results of the POC test show that the performance of the proposed sensor unit appears promising, resulting in 2% of data drop rates and an improved Bluetooth capturing rate.
1 January 2017 in Transportation Research Record: Journal of the Transportation Research Board
Automated longitudinal control technology has been tested through cooperative adaptive cruise control (CACC), which is envisioned to improve highway mobility drastically by forming a vehicle platoon with short headway while maintaining stable traffic flow under disturbances. Compared with previous research efforts with the pseudomultiobjective optimization process, this paper proposes an automated longitudinal control framework based on multiobjective optimization (MOOP) for CACC by taking into consideration four optimization objectives: mobility, safety, driver comfort, and fuel consumption. Of the target time headways that have been tested, the proposed CACC platoon control method achieved the best performance with 0.9- and 0.6-s target time headways. Compared with a non-optimization-based CACC, the MOOP CACC achieved 98%, 93%, 42%, and 33% objective value reductions of time headway deviation, unsafe condition, jitter, and instantaneous fuel consumption, respectively. In comparison with a single-objective-optimization-based approach, which optimized only one of the four proposed objectives, it was shown that the MOOP-based CACC maintained a good balance between all of the objective functions and achieved Pareto optimality for the entire platoon.