26 June 2020 in IEEE Access
To overcome the influence of multiple operating conditions for fault detection, this paper proposes a method to detect fault for the suspension system of maglev trains. Firstly, the complex operating condition of the maglev train is divided into some simple conditions, and the operating samples are extracted through the time window in the same simple operating condition. Secondly, the features of the extracted samples are extracted by the Fast Walsh-Hadamard transform, and the noise is removed by the median filtering. Thirdly, after adopting principal component analysis to reduce the dimensionality of the feature, the mean of the feature is calculated and applied to calculate the Euclidean distance from the features of the new data obtained by the same processing in each time. Fourthly, the new Euclidean distance obeying the Gaussian distribution is obtained through the Box-Cox transformation. Finally, the fault threshold in each simple operating condition is established through the characteristics of Gaussian distribution. Taking a certain operating condition as an example, the method is compared with the three similar methods. The results reveal that the proposed method can detect the faults timely and has a low false alarm rate. Moreover, the proposed sub-healthy data are within an acceptable range. Based on these results, the proposed method can be applied in fault detection of the maglev train, providing a certain basis for fault diagnosis.
7 September 2020 in IEEE Access
With the increasing development of industrial technology, fault detection technology has been widely applied in many complex systems. Aiming at the problems of multi-operation conditions and the data length needed for fault detection using Kullback- Leibler Divergence (KLD), a novel fault detection method for complex systems based on optimized KLD under multi-operation conditions is proposed in this paper. In the first place, based on the historical data of the system, the complex operation conditions of the system are divided into several simple mutually exclusive operation conditions, and the division standard is established. In the next place, the optimal length can be quickly determined by autocorrelation analysis and applied to various operation conditions. After the next, in the training stage, the KLD values of all training data are calculated with the benchmark that is the initial optimal data length of each operation condition. And the maximum value is taken as the threshold for fault detection. Afterward, in the test phase, it starts by judging the type of operation condition that the data belongs to, then the corresponding KLD value is calculated, which is compared with the corresponding threshold, so as to determine whether the fault occurs. Eventually, this method is applied to the suspension system of the maglev train and respectively compared with the fault detection methods based on Euclidean distance or Mahalanobis distance. The results show that the proposed method possesses a low false alarm rate and high sensitivity.
10 May 2023 in Transactions of the Institute of Measurement and Control
Aiming at the problem of optimal design of the controller of electromagnetic levitation system, this paper proposes a gradient estimator-based controller design and optimization structure suitable for electromagnetic levitation system. The structure consists of a nominal controller, a residual generator, and a dynamic compensator. The controller structure can further improve the anti-disturbance and robustness of the electromagnetic levitation system on the premise of ensuring the stability and reliability. Considering the generality of electromagnetic levitation system, the proportional–integral–derivative (PID) controller is selected as the nominal controller, and the robustness of the system is improved by the dynamic compensator based on the residual generator. The parameter design and update strategy of dynamic compensator based on gradient estimator are proposed, and the expression of gradient estimator is designed and deduced. Taking the single-degree-freedom electromagnetic levitation experimental platform as an example, the simulation and experimental results show that the structure has strong robustness to shock disturbances. Compared with the PID controller, the range of the gap fluctuation is smaller after the instantaneous impact interference, and the anti-interference capability of the electromagnetic levitation system is improved.
18 September 2020 in IEEE Access
The fault detection of the suspension system in a maglev train is of great importance for its operational safety and reliability. However, in random matrix theory (RMT), the size of the random matrix direct impacts the result of the mean spectral radius (MSR). In this paper, a state-of-the-art fault detection method for suspension systems is proposed using optimized RMT. The random matrix with the largest number of eigenvalues is obtained by reshaping the original data, with the help of the auto-correlation length from the correlation analysis. Finally, the optimized MSR is applied to detect the fault. The results of the experiment illustrate that the proposed method is applicable and effective.
30 December 2025 in Control Engineering Practice