29 September 2023 in RADIOELECTRONIC AND COMPUTER SYSTEMS
The article’s subject matter is to classify Electroencephalography (EEG) signals in Autism Spectrum Disorder (ASD) sufferers. The goal is to develop a classification model using Machine Learning (ML) algorithms that are often implemented in Brain-Computer Interfaces (BCI) technology. The tasks to be solved are as follows: pre-processing the EEG dataset signal to separate the source signal from the noise/artifact signal to produce an observation signal that is free of noise/artifact; obtaining an effective feature comparison to be used as an attribute at the classification stage; and developing a more optimal classification method for detecting people with ASD through EEG signals. The methods used are: one of the wavelet techniques, namely the Continuous Wavelet Transform (CWT), which is a technique for decomposing time-frequency signals. CWT began to be used in EEG signals because it can describe signals in great detail in the time-frequency domain. EEG signals are classified into two scenarios: classification of CWT coefficients and classification of statistical features (mean, standard deviation, skewness, and kurtosis) of CWT. The method used for classifying this research uses ML, which is currently very developed in signal processing. One of the best ML methods is Support Vector Machine (SVM). SVM is an effective super-vised learning method to separate data into different classes by finding the hyper-plane with the largest margin among the observed data. The following results were obtained: the application of CWT and SVM resulted in the best classification based on CWT coefficients and obtained an accuracy of 95% higher than the statistical feature-based classification of CWT, which obtained an accuracy of 65%. Conclusions. The scientific contributions of the results obtained are as follows: 1) EEG signal processing is performed in ASD children using feature extraction with CWT and classification with SVM; 2) the combination of these signal classification methods can improve system performance in ASD EEG signal classification; 3) the implementation of this research can later assist in detecting ASD EEG signals based on brain wave characteristics.
5 February 2024 in IEEE Access
This paper presents an experimental study on the performance of LoRaWAN, a wireless communication protocol capable of transmitting data over long distances with low power consumption and low cost. The study aims to understand the relationship between transmission and connectivity in the context of LoRaWAN. Previous studies on LoRaWAN have not explored the impact of variables such as building height, elevation above sea level (MASL), drive test elevation, gateway elevation, drive test distance, signal-to-noise ratio (SNR), and Received Signal Strength Indicator (RSSI) on the coverage status based on free space loss. Therefore, this research conducted experiments using drive test devices (K02188, K02204, and K02205) to investigate the influence of these variables on the performance of LoRaWAN. The experimental results include log data and historical data, demonstrating the reliability of LoRaWAN technology in open space. The RSSI measurements, which represent the signal strength, range from around -127 dB to 60 dB, with an average SNR of 7 dB. The coverage status is classified into different categories, including Excellent (12.55%), Acceptable (16.57%), Good (19.86%), Poor (23.98%), and Very Poor (27.01%). The correlation variable analysis reveals that the coverage status is highly correlated with the independent variables. These findings provide valuable insights into the performance and reliability of LoRaWAN in open spaces, and the correlation variables shed light on the factors influencing the coverage status.
9 January 2024 in JURNAL MEDIA INFORMATIKA BUDIDARMA
Cucumber is one of the horticultural commodities that has good prospects for cultivation because cucumber plants can be marketed domestically and abroad. Soil condition and fertility a very important factors in increasing agricultural growth and production. The ideal data for a good soil pH for planting cucumbers is 6-7, for a soil temperature of 18-30C and humidity of 50-60%. Ignorance of farmers about the value and condition of the land can lead to poor production of cucumber plants. Therefore the authors created a control and monitoring system to monitor soil conditions or growing media in cucumber plants. In this system, there is a soil pH sensor, temperature sensor, soil moisture sensor, and automatic sprinkler for fertilizer when the soil pH value is less than the specified limit. This system also applies the Internet of Things concept for sending data on the Telkom IoT Platform platform. Based on the test results of testing the soil temperature sensor, it gets an average error value of 0.67% and an accuracy value of 99.33%. Testing the soil moisture sensor obtains an error value and accuracy of 4.80% and 95.20%, respectively. Whereas in testing the pH sensor which was calibrated using the linear regression method, it obtained an average error value of 1.69% and an accuracy of 98.31%.
23 April 2024 in RADIOELECTRONIC AND COMPUTER SYSTEMS
The subject matter of this paper revolves around the utilization of Deep Learning techniques for the identification of Autism Spectrum Disorder (ASD) through facial expression analysis. The goal is to assess the performance of various Deep Learning architectures in this context, aiming to support the evaluation of AI-based ASD identification technologies within medical imaging standards. The tasks undertaken include conducting a comprehensive performance analysis of different Deep Learning models, emphasizing the significance of data augmentation techniques, and evaluating the convergence ability of these models. Methods employed involve a simulation setup for evaluating Deep Learning architectures using facial expression images of children with ASD. The research utilizes secondary data from open-source sharing platforms comprising 2,840 optical images. The evaluation is conducted with consideration of data ratio settings and data augmentation procedures. Results indicate that data augmentation significantly improves the recall performance, with ResNet-101 architecture demonstrating superior accuracy, precision, and convergence ability compared to ResNet-50 and VGG-16. Finally, the conclusion drawn from this analysis highlights the efficacy of ResNet-101 with augmented data. It stands out as the most suitable model for ASD identification based on facial expressions, emphasizing its potential for early intervention and increased awareness. the scientific novelty of the results obtained lies in its contribution to advancing the state of the art in AI-driven ASD identification, adhering to medical standards, enhancing model performance through data augmentation, and facilitating early intervention strategies for improved patient outcomes.
31 December 2023 in JOIV : International Journal on Informatics Visualization
KKKurnianingsih Kurnianingsih
Kurnianingsih Kurnianingsih
ESErika Lety Istikhomah Puspita Sari
Erika Lety Istikhomah Puspita Sari
Smart street lighting is a key application in smart cities, enabling the monitoring and control of street lamps through internet connectivity. LoRa/LoRaWAN, an IoT technology, offers advantages such as low power consumption, cost-effectiveness, and a wide area network. With its extensive coverage of up to 15 kilometers and easy deployment, LoRa has become a favored connectivity option for IoT use cases. This study explores the utilization of LoRaWAN in Pangandaran, a regency in the West Java province of Indonesia. Implementing LoRaWAN in this context has resulted in several benefits, including the ability to monitor and control street lighting in specific areas of Pangandaran and real-time recording of energy consumption. The primary objective of this research is to estimate the number of LoRaWAN gateways required to support smart street lighting in Pangandaran. Two methods are employed: coverage calculation using the free space loss approach and capacity calculation. The coverage calculation suggests a requirement of 34 gateways, whereas the capacity calculation indicates that only two gateways are needed. Based on these findings, it can be inferred that, theoretically, a maximum of 34 gateways would be necessary for smart street lighting in the Pangandaran area. However, further research, including driving tests, is recommended to validate these results for future implementation. This study provides insights into the practical application of LoRaWAN technology in smart street lighting, specifically in Pangandaran. The findings contribute to optimizing infrastructure and resource allocation, ultimately enhancing the efficiency and effectiveness of urban lighting systems.
29 July 2024 in Journal of Telecommunication, Electronics, and Control Engineering (JTECE)
Tanaman bawang merah menjadi salah satu mata pencaharian petani yang memiliki nilai jual yang tinggi dari hasil panennya. Namun, kebanyakan petani masih mengendalikan hama tanaman bawang merah dengan penyemprotan pestisida secara berlebihan dan dikhawatirkan tanaman bawang merah mengalami kelebihan residu. Pengendalian fisik sudah diupayakan dengan memasang light trap di perkebunan tetapi pengoperasianya masih manual sehingga tidak efisien terhadap waktu kerja petani serta rawan terjadi pemborosan energi listrik akibat kelalaian. Pada penelitian ini light trap tersebut akan di optimasi dengan menerapkan sistem monitoring dan kontrol lampu otomatis supaya petani bisa mengetahui estimasi biaya dari listrik yang dipakai serta listrik yang dipakai bisa sesuai dengan kebutuhan. LYNX32 BOARD LoRa berperan penting sebagai pengolah data yang terhubung dengan sensor LDR agar lampu bisa menyala secara otomatis, sensor PZEM-004T agar bisa memantau tegangan dan arus yang ada pada light trap dan dikirimkan melalui komunikasi LoRa. Pada penelitian ini kontrol otomatis dapat beroperasi berdasarkan intensitas cahaya, LoRa dapat mengirimkan data sampa jarak 250 meter dengan kondisi LoS. Sensor PZEM-004T memiliki akurasi yang bagus untuk tegangan dengan kesalahan 0.08% sedangkan untuk presentase kesalahan arus dan daya cukup tinggi yaitu 13.26% dan 5%.