1 February 2017 in IET Electric Power Applications
In external‐rotor electric machine configurations, the rotor can be the major source of noise. This study analyses the distribution and the effects of radial forces and vibration in a 6/10 external‐rotor switched reluctance motor designed for an E‐bike application. The distribution of the electromagnetic force vector depends on the switching sequence, the geometry of the motor and the direction of rotation. Therefore, the effect of the switching strategy on the rotor radial force waveform has been analysed. It is shown that adjusting the turn‐on angle can reduce the high rate of change of radial force waveform at the pole corners. The effect of switching angles on the reduction of rotor vibration has also been examined.
4 December 2020 in IEEE Transactions on Transportation Electrification
This paper proposes two different interior permanent magnet (IPM) motor-generator designs for a hybrid electric vehicle application. The paper shows the trade-offs, merits, and demerits of two feasible designs of ferrite-magnet machines for such an application. Both designs use multilayer concentric ferrite magnets. They use different winding topologies: 48-slot 8-pole (48/8) integral-slot and 60/8 fractional-slot topologies. The width, length, and location of the embedded rotor magnets, in addition to the shape of the flux barriers, are optimized to achieve the required performance within the given constraints. The torque ripple of both designs is kept below 5 % at the base-speed operating point without applying skewing. The electromagnetic performance characteristics of both designs at the base-speed and maximum-speed operating points are presented. The efficiency maps of both designs throughout the entire speed range are also investigated. Moreover, the paper presents an irreversible demagnetization analysis of the utilized ferrite magnets at different operating conditions. Spin analysis is performed to study the structural integrity of the proposed designs. Experimental results of both machines are provided for validation.