27 July 2012 in IEEE Transactions on Signal Processing
Functions on the sphere appear in several applications, including geodesics, imaging and acoustics. Sampling of these functions may result in aliasing if the sampling condition is not met. The generalized sampling expansion introduced by Papoulis enables the reconstruction of a band-limited function sampled at a frequency lower than the Nyquist frequency using the outputs of several linear time-invariant systems. This paper formulates the generalized sampling expansion for functions on the sphere using spherical harmonics decomposition, facilitating sub-Nyquit sampling without aliasing error. An analysis of linear systems on the sphere and the aliasing phenomenon in the spherical harmonics domain is presented. Examples demonstrating the performance of the method and its limitations are studied.
1 March 2010 in Inverse Problems
1 January 2021 in Journal of Sound and Vibration
1 December 2016 in Journal of the Audio Engineering Society
10 March 2021 in Journal of the Audio Engineering Society
Binaural audio requires the use of crosstalk cancellation if reproduced using loudspeakers. A three-listener crosstalk cancellation system has been designed and built as part of this work. Simulations for different loudspeaker distributions are presented and a large system span is shown to increase low-frequency crosstalk cancellation performance while a denser loudspeaker distribution in front of a given listener increases mid to high-frequency crosstalk cancellation. The system's performance...
15 October 2021 in IEEE/ACM Transactions on Audio, Speech, and Language Processing
Sound field reproduction is a promising technology for reproducing a desired sound field over a specific area. However, several practical challenges exist, such as the requirement for a large number of loudspeakers and the degradation of spatial reproduction accuracy due to room reflections. This work proposes a sound field reproduction method based on a cylindrical loudspeaker array that is used to both radiate sound directly towards the listener and take advantage of controlled first-order reflections from the room's walls. The sound field corresponding to one or more virtual sound sources is created by the combination of the direct and reflected sound at the listener position. As long as the lateral walls generate well-defined specular reflections, the simple model of the reverberant field with the proposed formulation enables this method to work without elaborate acoustical measurements. Two approaches with different concepts of controlling the array are compared and their mathematical equivalence is shown. To evaluate the performance, both simulations and experiments were conducted, showing a good agreement with theory.