9 April 2023 in Advanced Energy Materials
The electrochemical CO2 reduction reaction (CO2RR) is an attractive method to produce renewable fuel and chemical feedstock using clean energy sources. Formate production represents one of the most economical target products from CO2RR but is primarily produced using post‐transition metal catalysts that require comparatively high overpotentials. Here a composition of bimetallic Cu–Pd is formulated on 2D Ti3C2Tx (MXene) nanosheets that are lyophilized into a highly porous 3D aerogel, resulting in formate production much more efficient than post‐transition metals. Using a membrane electrode assembly (MEA), formate selectivities >90% are achieved with a current density of 150 mA cm−2 resulting in the highest ever reported overall energy efficiency of 47% (cell potentials of −2.8 V), over 5 h of operation. A comparable Cu‐Pd aerogel achieves near‐unity CO production without the MXene templating. This simple strategy represents an important step toward the experimental demonstration of 3D‐MXenes‐based electrocatalysts for CO2RR application and opens a new platform for the fabrication of macroscale aerogel MXene‐based electrocatalysts.
3 February 2023 in Chemistry – A European Journal
The electrochemical reduction of carbon dioxide (CO2) to value‐added chemicals is a promising strategy to mitigate climate change. Metalloporphyrins have been used as a promising class of stable and tunable catalysts for the electrochemical reduction reaction of CO2 (CO2RR) but have been primarily restricted to single‐carbon reduction products. Here, we utilize functionalized earth‐abundant manganese tetraphenylporphyrin‐based (Mn‐TPP) molecular electrocatalysts that have been immobilized via electrografting onto a glassy carbon electrode (GCE) to convert CO2 with overall 94 % Faradaic efficiencies, with 62 % being converted to acetate. Tuning of Mn‐TPP with electron‐withdrawing sulfonate groups (Mn‐TPPS) introduced mechanistic changes arising from the electrostatic interaction between the sulfonate groups and water molecules, resulting in better surface coverage, which facilitated higher conversion rates than the non‐functionalized Mn‐TPP. For Mn‐TPP only carbon monoxide and formate were detected as CO2 reduction products. Density‐functional theory (DFT) calculations confirm that the additional sulfonate groups could alter the C−C coupling pathway from *CO→*COH→*COH‐CO to *CO→*CO‐CO→*COH‐CO, reducing the free energy barrier of C−C coupling in the case of Mn‐TPPS. This opens a new approach to designing metalloporphyrin catalysts for two carbon products in CO2RR.
1 May 2020 in ECS Meeting Abstracts
NJNattanon Joraleechanchai
RDRuttiyakorn Donthongkwa
AKAtiweena Krittayavathananon
Atiweena Krittayavathananon
Lithium metal is an attractive anode material for rechargeable batteries due to its extremely high theoretical specific capacity (3860 mA h g−1), low density (0.59 g cm−3) and highest negative reduction potential (−3.040 V vs. S.H.E.). Unfortunately, lithium metal itself faces many problems including inhomogeneous lithium deposition, infinite volume expansion, increased polarization, and dendrite formation. To overcome these drawbacks, several methods have been studied such as the use of an artificial solid electrolyte interphase (SEI) layer, and electrolyte additives. However, the electrolyte additives are continuously consumed during cycling and thus affect the electrochemical performance. Herein, we use the imidazolium-based ionic liquid in order to passivate the metallic lithium. This can lead to the stable and uniform SEI formation through Li stripping and plating. To achieve fundamental understanding, reactive molecular dynamic simulation (Reaxff) has been used to investigate the mechanism and compositions of the passivation layer compounds. The predicted compounds relate and even control to the cell performances of Li metal batteries.