1 June 2020 in Electrochimica Acta
10 January 2020 in Journal of Natural Fibers
FMFrancisco Maciel Monticeli
Francisco Maciel Monticeli
To enhance the removal of vegetal oil from water, the influence of the concentration of fibers from sugarcane bagasse pretreated by the steam explosion as reinforcement in polyurethane foam was used. The composites were obtained by mass mixing the polyol with the prepolymer (1: 1) and reinforced with 5% to 20% (wt/wt) sugarcane bagasse fibers. The fibers, composites and pure polyurethane were characterized by scanning electron microscopy (SEM), X-Ray Diffraction (XRD) and Surface area measurements (BET). Sorption tests were carried out on the fibers, pure polyurethane (PU) and composites. The sorption capacity of the composites was evaluated as a function of the fiber content inserted in the matrix. When applied as the oil sorbents, it was found that the composites reinforced with pretreated fibers presented better results, due to defibrillation of the fiber and the increase of its contact area dispersed in the polymer. Efficient removal increases with increasing concentration of fibers reinforced in polyurethane.
25 February 2024 in Small
1 January 2020 in Progress in Organic Coatings
31 July 2024 in Applied Materials Today
MAMilena Nakagawa de Arruda
Milena Nakagawa de Arruda
JAJoão Marcos Kruszynski Assis
João Marcos Kruszynski Assis
+2
16 September 2024 in ACS Applied Materials & Interfaces
MXenes are the newest class of two-dimensional nanomaterials characterized by large surface area, high conductivity, and hydrophilicity. To further improve their performance for use in energy storage devices, heteroatoms or functional groups can be inserted into the Mxenes' structure increasing their stability. This work proposes insertion of lanthanum atoms into niobium-MXene (Nb-MX/La) that was characterized in terms of morphogy, structure, and electrochemical behavior. The addition of La to the Nb-MXene structure was essential to increase the spacing between the layers, improving the interaction with the electrolyte and enabling charge/discharge cycling in a higher potential window and at higher current densities. Nb-MX/La achieved a specific capacitance of up to 157 mF cm-2, a specific capacity of 42 mAh cm-2 at 250 mV s-1, a specific power of 37.5 mW cm-2, and a specific energy of 14.1 mWh cm-2 after 1000 charge/discharge cycles at 50 mA cm-2.