This paper presents a multi-objective optimization approach for a fractional-order control system for electricmagnetic suspension (EMS) type magnetic levitation (maglev) models, aiming to optimize the non-linear magnetic buoyancy control parameters. Firstly, a multi-body dynamics model of an EMS-type maglev vehicle with a fractional-order PID control system is developed. To fulfill the multi-objective requirements and optimize the fractional order parameters, an improved multiobjective optimization algorithm is proposed. The Sperling index and the magnitude of the vertical suspension gap variation are employed as the optimization objectives. Then, the aforementioned multi-objective optimization algorithm is applied to the constructed multi-body dynamics model to perform multiobjective optimization of the control parameters. Finally, the Pareto front solution is calculated and the optimal control parameters are obtained. The results demonstrate that the optimized control parameters can significantly reduce the vertical suspension gap and Sperling index during operation, with the reduction in the vertical suspension gap amplitude and its standard deviation being 10∼73%, and the reduction in the Sperling index being 8∼13%.
25 September 2024 in IEEE Transactions on Transportation Electrification
The electromagnet levitation control system is the core of maglev trains, but various external disturbances make the design of the controller difficult. In addition, multiple electromagnet maglev systems are coupled, and the independent control mode lacks the necessary synchronization coordination mechanism. This study proposes a linear expanded state observer (LESO)–backstepping control method with double cross coupling of air gap and velocity for the levitation frame of electromagnetic suspension maglev vehicles to eliminate external disturbances and unknown influences, thus improving the synchronization performance of each point on the levitation frame. A virtual controller is designed with the backstepping control strategy, and the unknown disturbances in the controller are compensated for by LESO. A single-electromagnet control strategy is derived. Then, the synchronization error among the levitation points is used as an additional feedback signal for the input of the four levitation point controllers to demonstrate the closed-loop stability of the system under the proposed strategy. Results demonstrate the tracking effect of the observer and the superiority of the proposed method in improving the synchronization and tracking performance of the levitation frame points.
18 November 2023 in Journal of Low Frequency Noise, Vibration and Active Control
This paper presents a novel hybrid algorithm based on CMOGWO-ADNSGA-II to solve the vibration stability problem during the operation of a EMS-type maglev train dynamics model subjected to strong non-linear magnetic buoyancy. The proposed algorithm optimizes the control system parameters of EMS-type maglev train suspensions by combining an improved multi-objective chaotic grey wolf algorithm (CMOGWO) with an improved non-dominated Sorting genetic algorithm-II (ADNSGA-II) to enhance the search capability of the algorithm and ensure population diversity. The efficacy of the algorithm is demonstrated by applying it to the EMS-type maglev train suspension frame control system to find the optimal control parameters. Experimental results show that the system with the optimal parameters applied significantly reduces the suspension gap amplitude and the corresponding standard deviation, as well as the vertical acceleration amplitude and the corresponding standard deviation during operation. The proposed algorithm provides a good solution for EMS-type maglev train suspension vibration control, which can improve its performance and safety.