15 May 2024 in Journal of Lightwave Technology
Previous investigations have preliminarily revealed that the two main methods of fiber-longitudinal power profile estimation (PPE), the correlation-based (CM) and minimum-mean-square-error-based (MMSE) methods, show different performance and noise robustness. To thoroughly comprehend the PPE behavior in the presence of stochastic noise, this study introduces the first comprehensive noise analysis of CM-PPE and MMSE-PPE. By introducing a novel metric, the profile-to-noise ratio (PNR), we derive equations verifying that the CM-PPE offers enhanced noise tolerance at the expense of reduced power profile fidelity, whereas MMSE-PPE exhibits the converse characteristics. Moreover, a further noise analysis is also performed with the real-time assumption that the number of processed samples per block is limited and the profiles output by different processing blocks are averaged. Based on the theoretical expressions and the aid of numerical simulation, we confirm that the conventional averaging operation is suitable for CM-PPE, while MMSE-PPE needs to modify the averaging implementation structure for a more stable estimation. Our theoretical insights facilitate a deeper comprehension of PPE, paving the way for its real-time application.
28 May 2020 in IEEE Access
A cost-effective chromatic dispersion (CD) estimation method is proposed, which is based on the delay-tap sampling (DTS) technique in combination with periodic training sequences (PTS). By performing equivalent sampling of PTS, DTS-based CD estimation at ultra-low sampling rate can be realized, significantly reducing the cost and high-speed requirements of analog to digital converters (ADCs). In contrast to the existing Nyquist DTS-based CD estimation method, we construct the CD lookup table in the CD over-compensated region, which can be suitable for a dynamic range of OSNR conditions. The CD lookup table built from the simulation can be used in the experimental system with similar configurations directly, indicating that the suggested method is reasonable and highly feasible. Besides, with only 1.25 GSa/s sampling rate of ADCs (about 1/30 of the Nyquist sampling rate which is 40.28 GSa/s), both 20.14 GBaud quadrature-phase-shift-keying (QPSK) simulation and experimental systems demonstrate the feasibility of the method, with a 28 ps/nm maximum CD estimation error for the simulation and a 35 ps/nm maximum CD estimation error for the experiment when OSNR is fixed to 18 dB. Furthermore, we also investigate the robustness of our method under the condition of different amplifier spontaneous emission (ASE) noise and nonlinear noise. The proposed method shows great potential for making a remarkable cost reduction in CD monitoring.
17 January 2024 in Journal of Lightwave Technology
In the C-band high-speed long-reach optical intensity modulation direct detection (IM/DD) communication system, severe signal distortion, including chromatic dispersion and device bandwidth limitations, making the size of lookup tables (LUTs) required by equalizers too large to be operated. In this paper, we propose a cluster-assisting lookup table (CLUT) approach to reduce the table size significantly. In addition, we also propose multiplication-free CLUT-based decision-feedback equalizer (CLUT-DFE) and CLUT-based log-maximum a posteriori estimation with a fixed number of surviving states (CLUT-FS-MAP) to effectively compensate for channel distortions. Using the k-means clustering algorithm, the proposed CLUT significantly shortens the table size by reducing the number of independent variable values input. The table size of traditional LUTs increases exponentially with the filter tap number, making it impossible for LUTs to replace filters with tap numbers greater than 20. The CLUT breaks this limitation. The proposed schemes are experimentally performed in a C-band 61-Gb/s IM/DD optical on-off keying (OOK) system featuring a 3.65-GHz 3-dB bandwidth over a 100-km standard single mode fiber (SSMF). Compared to traditional LUT, CLUT reduces table size by about 10 orders of magnitude with the same performance. To the best of our knowledge, this study represents the first deployment of ultrasmall-size CLUT in equalization.
5 June 2023 in Journal of Lightwave Technology
A perturbation-aided advanced digital backpropagation (P-ADBP) is proposed for subcarrier-multiplexing (SCM) coherent systems. To improve the nonlinearity compensation (NLC) performance, for the first time, the first-order perturbation analysis is introduced into the conventional ADBP. Based on the fact that the perturbation-based self-subcarrier nonlinearity (PSSN) has a similar form as the cross-subcarrier nonlinearity (CSN), we approximate that PSSN and CSN can be calculated in parallel and the compensation of them can be fused together. This compensation fusion scheme saves the computational complexity effectively by sacrificing only a little performance. Furthermore, to realize the best performance, gradient descent is used to jointly optimize the perturbation coefficients and other necessary parameters in P-ADBP. Verified by 9×120-GBaud 1600-km wavelength-division multiplexing SCM systems with dual-polarization 16QAM modulation format, 1-Step P-ADBP provides identical Q $^{2}$ improvement as 5-Step ADBP but saves about 72.3% complexity. 5-Step P-ADBP and 10-Step P-ADBP also leapfrog into the NLC level of 10-Step ADBP and 20-Step ADBP, but save about 44.4% and 46.0% complexity, respectively. The proposed algorithm helps achieve an improved performance-complexity trade-off compared to the conventional ADBP and its state-of-the-art modifications.
26 September 2022 in IEEE Photonics Technology Letters
A novel simplified implementation structure is proposed for digital backpropagation in digital subcarrier-multiplexing systems (SCM-DBP) and one of its modifications, the SCM-DBP with infinite impulse response filters and reduced number of interfering subcarriers (IIR-RS-SCM-DBP). To the best of our knowledge, it is the first time to convert the serial calculation and compensation of self-subcarrier nonlinearity (SSN) and cross-subcarrier nonlinearity (CSN) to a parallel calculation and a fused compensation without affecting the nonlinear compensation (NLC) effectiveness. The performance is verified by a 9-channel wavelength-division multiplexing coherent numerical system with 120-GBaud 8-subcarrier dual-polarization 16QAM signal in each channel after 1600-km transmission. After verifying the robustness to multiple impairments, SCM-DBP adopting the fusion structure provides the same performance as before but saves about 4.5% NLC complexity. IIR-RS-SCM-DBP (4 interfering subcarriers) with the fusion structure provides about 10.8% NLC complexity reduction compared with the original IIR-RS-SCM-DBP, and about 63% NLC complexity reduction compared to SCM-DBP with about 0.16 dB penalty of $Q^{2}$ factor. The proposed fusion structure helps realize a more cost-effective NLC in digital subcarrier-multiplexing systems.
9 June 2023 in IEEE Photonics Technology Letters
A novel triple-convex 8-ary pulse amplitude modulation (TC-PAM8) probabilistic constellation shaping (PCS) scheme with bipolar symmetric alphabet is proposed in the intensity modulation/direct detection (IM/DD) system. Maintaining the basic implementation structure of the probabilistic amplitude shaping (PAS), the target entropy of TC-PAM8 is adjusted by setting the one-degree-of-freedom shaping factor accordingly. The performance of the proposed scheme is verified by an O-band 20-GBaud experimental system over 20-km standard single-mode fiber (SSMF) transmission, where the entropy is set to 2.2, 2.5, and 2.8 bit/symbol. The experimental results show that the proposed TC-PAM8 exhibits a better transmission performance compared with Maxwell-Boltzmann PAM8 (MB-PAM8) and Reverse-Maxwell-Boltzmann PAM8 (Rev-MB-PAM8) shaping scheme. Specifically, TC-PAM8 achieves a maximum gain of up to 1 dB and 2.2 dB in receiver sensitivity compared with the MB-PAM8 and Rev-MB-PAM8, respectively when the entropy is 2.2 bit/symbol.