26 May 2021 in IEEE Transactions on Instrumentation and Measurement
Automatic positioning technology of underground vehicles has become the key technology for the intelligent development of coal mines. To improve the comprehensive positioning accuracy of unmanned automatic vehicles in coal mines, an 18-D model of an odometer-aided inertial navigation system (INS) and a positioning model of an extended Kalman filter-based ultra-wideband (UWB) are established based on the vehicle kinematics equation. A tight integrated state estimation model is proposed to restrain the long-time drift of the INS and enhance the instability of the UWB system. A local positioning reference system based on an infrared motion capture system is established for the first time. Experimental tests show that the average positioning error of the proposed algorithm is 6.03 cm in the forward direction, and the root-mean-square error increased by 36.09% and 38.24% compared with those of the INS and UWB system, respectively. It is experimentally verified that the integrated positioning system achieves decimeter-level positioning accuracy in a coal mine roadway environment.
16 January 2025 in IEEE/ASME Transactions on Mechatronics
In order to realize the accurate tracking of the end-effector trajectory of the stacking robot, an end-effector trajectory tracking control method based on LuGre model is proposed. First, the dynamic model of the stacking robot including joint friction is established. In order to eliminate the influence of the joint friction of the stacking robot, the LuGre friction model is introduced into the stacking robot system. The genetic algorithm and the two-step dynamic response method are used to identify the static and dynamic parameters of the LuGre friction model. The identified parameters are feed-forward compensated to the controller, which greatly improves the robustness of the controller. Second, aiming at the problem that it is difficult to obtain the model parameter information of the stacking robot, an adaptive double fuzzy backstepping sliding mode controller is designed. The double fuzzy system is used to realize the online estimation of the model information parameters while the switching term of the sliding mode controller is continuous, and the adaptive adjustment robust gain is realized. Furthermore, the chattering problem caused by the sliding mode controller is eliminated and the stability of the system is proved. Finally, the experimental study on the trajectory tracking control of the terminal of the stacking robot is carried out. The results show that the method can well realize the joint trajectory and end-effector trajectory tracking control of the stacking robot. The mean error between the relative position points of the spatial trajectory is within 2.47 mm, and the chattering phenomenon is obviously improved.