This study is focused on imaging of weak zones in subsurface using borehole and geophysical datasets. These weak zones are present within Jhill limestone of Miocene age across the northern, Karachi. A total of forty-nine core samples were collected from eleven boreholes about 30 m deep within the study area. The core analysis reveals presence of cavities in fractured limestone at shallow and deep levels. The lateral extension and thickness of these weak zones are well imaged by the electrical resistivity tomography (ERT) dataset. The 2D tomographs of the six profiles show variability in the ground resistivity response. The ERT profiles are interpreted using on hand samples collects from boreholes. These tomographs reveal relatively high resistivity values interpreted as intercalation of dry clay and marl beds within limestone. The medium resistivity values suggest presence of clay and sand in highly fractured limestone or surficial dry features. The low resistivity values are interpreted to be originated 24 by the weak zones filled with lithologies having high moisture content within limestone. The collected core samples were analysed for geotechnical parameters. The integration of borehole and ERT datasets delineated weak zones in the northern and central regions, which should be well28 cemented to avoid any geohazard.
In 2019, a series of earthquakes struck the northern sub-Himalayan region of Pakistan, with the Mirpur earthquake triggering extensive coseismic liquefaction-induced surface deformations, such as sand blows, ground failure, and lateral spreading along the upper Jhelum Canal (UJC). A total of thirty-two vertical electrical sounding (VES) sites were acquired to investigate the deeper aquifer system in the region. An electrical resistivity tomography (ERT) survey was conducted along the canal to comprehensively delineate the subsurface conditions associated with the coseismic liquefaction phenomenon in the epicentral region. To address the water quality after the earthquakes, physiochemical analysis was also performed on twenty-four water samples collected from the tube wells and shallow water wells across the study area. The VES data reveals that the lithological units consist of thick layers of sandy clay, sand, and sand with gravel. The iso-resistivity map and hydrochemical analysis reflects fresh groundwater potential at a depth of about 100m. The ERT profiles identified a low resistivity (<10Ωm) saturated layer of clay that is about 20m thick. This saturated layer records the rise in groundwater level and contributes to liquefaction and land subsidence during an earthquake. The higher values of turbidity in shallow water samples document deterioration of water quality due to multiple earthquake tremors. The sandy aquifer units present at deeper levels are highly recommended for drinking purposes and domestic usage.