Lithium-ion batteries (LIBs) continue to draw vast attention as a promising energy storage technology due to their high energy density, low self-discharge property, nearly zero-memory effect, high open circuit voltage, and long lifespan. In particular, high-energy density lithium-ion batteries are considered as the ideal power source for electric vehicles (EVs) and hybrid electric vehicles (HEVs) in the automotive industry, in recent years. This review discusses key aspects of the present and the future battery technologies on the basis of the working electrode. We then discuss how lithium-ion batteries evolve to meet the growing demand on high charge capacity and electrode stability. An account of a stand-alone energy device (off-grid system) that combines an energy harvesting technology with a lithium-ion battery is also provided. The main discussion is categorized into three perspectives such as the evolution from the conventional to the advanced LIBs (e.g., Li-rich transition metal oxide and Ni-rich transition metal oxide batteries), to the state-of-the-art LIBs (e.g., Li–air, Li–sulfur batteries, organic electrode batteries, solid-state batteries, and Li–CO2 batteries), and to the hybridized LIBs (e.g., metal halide perovskite batteries).
Tetragonal phases for perovskite solar cells: The power conversion efficiencies (PCEs) of all-inorganic perovskites are lower than those of materials with organic cations. This is in part because these materials have larger bandgaps. The cubic crystal phases of these materials also exhibit poor stability. Wang et al. synthesized the tetragonal β-phase of CsPbI 3 from HPbI 3 and CsI. The material exhibited higher stability and a more favorable bandgap, which allowed for PCEs of 15%. Passivation of the surface trap state with choline iodide boosted PCEs to 18%. Science , this issue p. 591
Suppressing nucleation over large areas: Although formamidinium-based lead iodide (PbI 2 ) perovskites have a favorable bandgap and good thermal stability, the difficulty in controlling nucleation makes it difficult to grow high-quality, large-area films compared with methylammonium counterparts. Bu et al. show that adding N -methyl-2-pyrrolidone to the perovskite precursors forms an adduct with PbI 2 that promotes the formation of the desired black α-phase at room temperature. The addition of potassium hexafluorophosphate eliminated hysteresis by passivating interfacial defects and promoted long-term thermal stability at 85°C in unencapsulated devices. Large-area modules (17 square centimeters) achieved power conversion efficiencies of 20.4%. Science , abh1035, this issue p. 1327
Hybrid lead halide perovskites have emerged as promising active materials for photovoltaic cells. Although superb efficiencies have been achieved, it is widely recognized that long-term stability is a key challenge intimately determining the future development of perovskite-based photovoltaic technology. Herein, we present reversible and irreversible photodecomposition reactions of methylammonium lead iodide (MAPbI3). Simulated sunlight irradiation and temperature (40–80 °C) corresponding to solar cell working conditions lead to three degradation pathways: (1) CH3NH2 + HI (identified as the reversible path), (2) NH3 + CH3I (the irreversible or detrimental path), and (3) a reversible Pb(0) + I2(g) photodecomposition reaction. If only the reversible reactions (1) and (3) take place and reaction (2) can be avoided, encapsulated MAPbI3 can be regenerated during the off-illumination timeframe. Therefore, to further improve operational stability in hybrid perovskite solar cells, detailed understanding of how to mitigate photodegradation and thermal degradation processes is necessary. First, encapsulation of the device is necessary not only to avoid contact of the perovskite with ambient air, but also to prevent leakage of volatile products released from the perovskite. Second, careful selection of the organic cations in the compositional formula of the perovskite is necessary to avoid irreversible reactions. Third, selective contacts must be as chemically inert as possible toward the volatile released products. Finally, hybrid halide perovskite materials are speculated to undergo a dynamic formation and decomposition process; this can gradually decrease the crystalline grain size of the perovskite with time; therefore, efforts to deposit highly crystalline perovskites with large crystal sizes may fail to increase the long-term stability of photovoltaic devices.
1 August 2019 in Angewandte Chemie International Edition
In several photovoltaic (PV) technologies, the presence of electronic defects within the semiconductor band gap limit the efficiency, reproducibility, as well as lifetime. Metal halide perovskites (MHPs) have drawn great attention because of their excellent photovoltaic properties that can be achieved even without a very strict film‐growth control processing. Much has been done theoretically in describing the different point defects in MHPs. Herein, we discuss the experimental challenges in thoroughly characterizing the defects in MHPs such as, experimental assignment of the type of defects, defects densities, and the energy positions within the band gap induced by these defects. The second topic of this Review is passivation strategies. Based on a literature survey, the different types of defects that are important to consider and need to be minimized are examined. A complete fundamental understanding of defect nature in MHPs is needed to further improve their optoelectronic functionalities.