Laboratory experiments are conducted to measure the velocities of 2D turbulent open channel flow upstream of a vertical sluice gate. The flow case having the same conditions with the experiment is analyzed by computational fluid dynamics simulation. The finite element method is used to solve the governing equations by employing the standard k –ε and standard k–ω turbulence closure models. The volume of fluid method is used to determine the free surface of the flow. The numerical results for the velocity field and the free surface profile from eight different computational meshes are compared with the experimental data, and based on the comparisons; the most suitable mesh system among the eight is selected. The comparisons of the numerical and experimental results show that the numerical simulation using the k–ε turbulence closure model predicts the velocity field and free surface profile more accurately compared to that of the k–ω turbulence model.
The simulation performance of two–dimensional flow over a round–crested chute spillway is examined using the finite element method along with the standard k–ε and the standard k–ω turbulence models. The volume of fluid method is used to determine the free surface of the flow.A mesh dependence study is conducted using the results obtained from three meshes of different densities. Grid convergence analyses indicate that the discretization error in the predicted velocities on the fine–mesh solution is within 2%. A two–layer model for the near–wall treatment was adopted involving a sufficiently fine mesh to model the viscosity–affected region. The numerical results are compared with experimental data for validation of turbulence models. Mean square errors of measured and predicted free surface and velocity profiles indicate that although both closure models predict the chute flow properties with a reasonable accuracy, the agreement using the k–ε model is slightly better.
1 September 2008 in Canadian Journal of Civil Engineering
Using the particle image velocimetry (PIV) technique, the laboratory experiments are conducted to measure the velocity fields of two-dimensional turbulent free surface flows upstream of rectangular and triangular broad-crested weirs. The experimental flow cases are analyzed theoretically by a computational fluid dynamics (CFD) modeling in which the finite element method is used to solve the governing equations. In the CFD simulation, the volume of fluid (VOF) method is used to compute the free surfaces of the flows. Using the standard k–ε and standard k–ω turbulence models, the numerical results for the velocity fields and flow profiles are compared with the experimental results for validation purposes. The computed results using k–ω turbulence model on compressed mesh systems are found in good agreement with measured data. The flow cases are also analyzed theoretically using the potential flow (PF) approach, and the numerical results for the velocity fields are compared with measurements.