Fanyu Zhang

Fanyu Zhang

Auto-generated profile, based on publicly available information

Fanyu Zhang

Northeastern University

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 September 2023 in Measurement Science and Technology
Verified
Journal Article
Closed access
SHShuo Han
Shuo Han
ZWZihuimin Wang
Zihuimin Wang
HZHao Zhang
Hao Zhang
FZFanyu Zhang
Fanyu Zhang
QHQingkai Han
Qingkai Han
In the study of the high-speed dynamic balance of flexible rotors, rotor unbalance positioning is a challenging topic. Particularly for slender rotors, the axial position of the unbalance has an important influence on the high-speed dynamic balance. The unbalance at different axial positions is not the same or even opposite in different rotor mode vibration behaviors. If the unbalance position of a rotor can be identified, the actual unbalance of the rotor can be reduced from the root. This balance method has the same effect in each vibration mode of the rotor; hence, low-speed dynamic balance can be realized to replace high-speed dynamic balance, considerably saving on costs. Deep learning based on few labeled samples can achieve good results for the identification of unbalanced positions; however, there are infinite potential positions of unbalance in the actual rotor. It is difficult to collect sufficient labeled samples to train a reliable intelligent diagnostic model. Fortunately, a large number of rotor vibration datasets labeled with different unbalance positions are available using the rotor dynamic model, and the unbalance position data calculated using the dynamic model contain diagnostic knowledge related to the rotor unbalance position data measured in the rig. Hence, inspired by transfer learning, this study proposed a transfer learning method using dynamic model simulation and experiment data for flexible rotor unbalance fault location. Cross-domain deep transfer recognition of rotor unbalance position was realized.

9 April 2021 in Mechanics & Industry
Verified
Journal Article
Open access
PDF file
DYDalian Yang
Dalian Yang
ZFZhang Fanyu
Zhang Fanyu
MJMiao Jingjing
Miao Jingjing
HZHongxian Zhang
Hongxian Zhang
LRLi Renjie
Li Renjie
TJTao Jie
Tao Jie
Misalignment fault is the main factor that affects the normal running of dual-rotor system. Quantitative identification the misalignment fault is an important way to ensure the safe and stable service of the dual-rotor system, while the identification accuracy of traditional methods is low. Aiming at the above problems, this paper proposed a dual-rotor misalignment fault quantitative identification method based on DBN and D-S evidence theory improved by mutual information measure (MIMD-S). Seven groups experiments were conducted and several vibration signals were collected. By comparing it with the traditional methods D-S, and Pignistic improved D-S (PD-S) evidence theory, the results show that the method proposed in this paper improves the accuracy of the misalignment fault quantitative identification of the dual-rotor, the identification error rate was only 0.36%.

10 July 2024 in Measurement Science and Technology
Verified
Journal Article
Closed access
FZFanyu Zhang
Fanyu Zhang
XLXuejun Li
Xuejun Li
QHQingkai Han
Qingkai Han
SGShuaiping Guo
Shuaiping Guo
SHShuo Han
Shuo Han
HZHongxian Zhang
Hongxian Zhang
Aiming at the problem that the dynamic balance process of a flexible rotor needs to start and stop frequently to add test weight, which is time-consuming and labor-consuming, and the balance accuracy is difficult to guarantee, a dynamic balance optimization method of flexible rotor based on grey wolf optimizer (GWO) is proposed. In this paper, a virtual prototype model is established based on a power turbine rotor for a certain type of turboshaft engine, and a rotor test platform is built. The transfer function is used to find the relationship between unbalance and vibration response, and the equilibrium equations are established to solve the problem. In the process of solving the problem that the equilibrium equations are mostly contradictory, GWO is used to solve the contradictory equations to obtain the optimal counterweight scheme at the full working speed of the rotor. The results show that the method proposed in this paper eliminates the cumbersome trial weight process of traditional dynamic balance. The average vibration reduction rate of this method is 33.8% at 5100 r min−1, 5400 r min−1 and 5700 r min−1, which is better than the conventional field dynamic balance. The work of this paper can improve the efficiency and accuracy of flexible rotor dynamic balance and provide technical reference for the vibration control of aero-engine.

22 May 2025 in Journal of Vibration and Control
Verified
Journal Article
Closed access
FZFanyu Zhang
Fanyu Zhang
XLXuejun Li
Xuejun Li
QHQingkai Han
Qingkai Han
YZYulai Zhao
Yulai Zhao
HLHui Li
Hui Li
JLJunzhe Lin
Junzhe Lin
Aiming at the problem of excessive vibration caused by the coupling of compressor unbalance and turbine unbalance of the aero-engine gas generator rotor, the vibration response law of the rotor and its influence on high-speed dynamic balancing is studied from the perspective of combined unbalanced phase difference. In this paper, the typical structure of the gas generator rotor system in a turboshaft engine is simplified, and the dynamical model of the rotor system is established by using the finite element method and the lumped mass method. Based on the dynamical model, the combined unbalanced phase difference is introduced to reveal the influence of the combined unbalanced phase difference on the vibration response of the rotor system. The influence coefficient matrix is constructed by the relationship between the unbalanced excitation and the vibration response of the rotor system. The least squares influence coefficient method based on the Nutcracker optimization algorithm is proposed to study the influence of combined unbalanced phase difference on high-speed dynamic balancing. The corresponding test was carried out based on the developed rotor system simulation test rig with a similar structure and dynamics to the gas generator rotor. The results show that the influence of combined unbalanced phase difference on the vibration response amplitude presents a cosine waveform. The peak and trough positions of the cosine waveform depend on the dominant vibration mode at the measured speed. The combined unbalanced phase difference is 180°, and the high-speed rotor’s vibration reduction rate is highest when it passes the critical speed after dynamic balance. The work of this paper provides a theoretical basis for the vibration control of the high-speed dynamic balancing of the rotor and provides important support for the actual needs of the project.

16 June 2023 in Measurement Science and Technology
Verified
Journal Article
Closed access
FZFanyu Zhang
Fanyu Zhang
SGShuaiping Guo
Shuaiping Guo
XLXuejun Li
Xuejun Li
QHQingkai Han
Qingkai Han
JMJiaojiao Ma
Jiaojiao Ma
HZHongxian Zhang
Hongxian Zhang
The structural performance failure of the rotating blade disk with disk crack is one of the major causes of aero-engine failures and even serious accidents. The blade tip timing (BTT) is a non-contact measurement technology that obtains the rotor operation status by detecting the blade. This paper has proposed a crack characterization method for the disk’s outer edge based on the BTT technique. In this process, the influence of crack state parameters (length and position) on the circumferential displacement signal of the blade tip is determined by using the crack tip displacement, the relative position of the blade tip motion during the rotation of the outer edge crack-containing disk and the actual blade tip measuring points, and the critical value of the crack state parameters affecting the blade tip offset is analyzed. The finite element simulation results verify the effectiveness and accuracy of the proposed method. The study of this article can provide a theoretical basis for the measurement of cracks on the disk’s outer edge by the BTT technique, which is of great significance for the accurate identification of the operating condition of the rotating blade disk structure.