We report an ultrafast cross phase modulation (XPM) effect in intersubband transition (ISBT) of coupled quantum wells, where the ISBT absorption of a transverse-magnetic mode pump signal induces phase modulation of a transverse-electric mode probe signal. Using waveguide-type ISBT devices, we have achieved XPM-based wavelength conversion with a power penalty of . Also, we propose XPM-based signal processing circuits for gate switching and modulation format conversion.
We have developed a Mach-Zehnder interferometric all-optical switch employing intersubband transition in an -coupled double quantum well waveguide. The recently discovered cross-phase modulation phenomenon was utilized as the switching mechanism; the nonlinear index of refraction for transverse electric polarized light is induced by intersubband optical excitation using transverse magnetic pump light. We demonstrate the demultiplexing operation of data signals to using this switch. At the input control pulse energy of , the demultiplexed signals showed an extinction ratio better than , and an error-free demultiplexing was achieved.
4 April 2014 in IEEE Transactions on Electron Devices
The bistability characteristics of GaN/AlN resonant tunneling diodes (RTDs) grown on a sapphire substrate were investigated. The RTDs exhibit bistability characteristics with high and low resistivity switched by varying the polarity of the bias voltage. Negative differential resistance is realized in the current-voltage (I-V) characteristics after low resistivity is achieved by application of a negative bias. The calculated I-V characteristics based on self-consistent methods indicate that the bistability characteristics are caused by the accumulation of electrons in the quantum well due to intersubband transitions. Also, the bistability characteristics of GaN/AlN RTDs were discussed toward the application to the ultrafast nonvolatile memory.
16 February 2007 in Japanese Journal of Applied Physics
Large, very fast phase modulation was observed in transverse electric (TE) probe light when an intersubband transition (ISBT) switch module using an InGaAs/AlAs/AlAsSb quantum well was pumped by transverse magnetic (TM) light. The phase shift amounted to 1.88 rad for a pump pulse energy of 4 pJ (fiber input), with very fast response. This phenomenon is explained by the change in plasma dispersion caused by the redistribution of electrons among subbands having different effective masses. This phase modulation will enable us to realize various novel ultrafast all-optical devices for signal processing.
11 March 2013 in IEEE Transactions on Electron Devices
Diamond Schottky barrier diodes (SBDs) with vertical channel structures are fabricated on an insulating diamond substrate. The deep etching technique is used to make a vertical channel structure in the diamond stacking layers of the p + /p - /insulating substrate. Mo Schottky electrodes with the Al 2 O 3 field plate structure are also fabricated to realize a high breakdown voltage. As a result, I-V characteristics with a high forward current density >10 3 A/cm 2 and a high breakdown voltage >700 V are obtained at 25 ° C and 250 ° C. Baliga's figure of merit is 332 MW/cm 2 , which is equivalent to the high value previously reported for diamond SBDs with lateral channel or pseudovertical channel structures, and is also ten times higher than the limit of Si SBDs. High-power diamond SBDs are expected to be realized on a large area insulating diamond substrate using this technique.