The purpose of this paper was to investigate the relationship between ash composition and ash fusion characteristic temperatures for some Turkish lignites. The lignite samples used are from different areas in Turkey. Regression analysis was used to relate the ash composition to the ash fusion behaviour. The results suggest that the chemical composition has a significant effect on the ash fusion temperatures. To consider Fe2O3 as an acidic ash constituent makes the realtionships between the selected ash composition parameters and ash fusion temperatures clearer.
1 January 2006 in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
Combustion characteristics of coking, semicoking, and noncoking Turkish bituminous coal samples from Zonguldak basin were investigated applying differential thermal analysis (DTA) and differential thermogravimetry (DTG) techniques. Results were compared with that of the coke from Zonguldak bituminous coal, a Turkish lignite sample from Soma, and a Siberian bituminous coal sample. The thermal data from both techniques showed some differences depending on the proximate analyses of the samples. Noncombustible components of the volatile matter led to important changes in thermal behavior. The data from both methods were evaluated jointly, and some thermal properties were interpreted considering these methods in a complementary combination.
Reactive sorbents for SO2 removal from humidified flue gas were prepared from fly ash-Ca(OH)2 mixtures using the pressure hydration technique. The fly ash samples were taken from three different coal-fired power plants in Turkey. The fly ash/Ca(OH)2 weight ratio, hydration time, and temperature were varied during the sorbent preparation step. Effects of these variations on the physical properties of activated sorbents were investigated. A statistical design technique was applied by use of a two-level factorial design matrix to interpret experimental results. It was found that increasing the temperature and fly ash/Ca(OH)2 weight ratio caused a decrease in the total surface area of sorbents. However, surface area values of sorbents were not generally affected by the hydration time variation. Finally, fly ash-Ca(OH)2 sorbents prepared at the optimum hydration conditions were sulphated at 338 K with a synthetic gaseous mixture containing 5000 ppm SO2 and 55% relative humidity.