29 October 2015 in Proceedings of the National Academy of Sciences
Significance: Many applications, including solar cells and touch screens, require coatings that are both optically transparent and electrically conductive. Most device structures use indium tin oxide to serve as this transparent conductor (TC), even though it accounts for a disproportionally large amount of device cost. Alternatives, such as polymer-based materials, may not only provide additional cost benefits, but may also allow for added functionality, such as flexibility. In this paper, we examine conductive poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) deposited by solution shearing as a TC film. Morphological and chemical changes caused by solution shearing deposition lead to record-high conductivities and overall excellent TC performance.
1 March 2013 in Solar Energy Materials and Solar Cells
29 July 2010 in Advanced Functional Materials
18 January 2011 in Nanotechnology
Using high surface area nanostructured electrodes in organic photovoltaic (OPV) devices is a route to enhanced power conversion efficiency. In this paper, indium tin oxide (ITO) and hybrid ITO/SiO2 nanopillars are employed as three-dimensional high surface area transparent electrodes in OPVs. The nanopillar arrays are fabricated via glancing angle deposition (GLAD) and electrochemically modified with nanofibrous PEDOT:PSS (poly(3,4-ethylenedioxythiophene):poly(p-styrenesulfonate)). The structures are found to have increased surface area as characterized by porosimetry. When applied as anodes in polymer/fullerene OPVs (architecture:commercial ITO/GLAD ITO/PEDOT:PSS/P3HT:PCBM/Al, where P3HT is 2,5-diyl-poly(3-hexylthiophene) and PCBM is [6,6]-phenyl-C-61-butyric acid methyl ester), the air-processed solar cells incorporating high surface area, PEDOT:PSS-modified ITO nanoelectrode arrays operate with improved performance relative to devices processed identically on unstructured, commercial ITO substrates. The resulting power conversion efficiency is 2.2% which is a third greater than for devices prepared on commercial ITO. To further refine the structure, insulating SiO2 caps are added above the GLAD ITO nanopillars to produce a hybrid ITO/SiO2 nanoelectrode. OPV devices based on this system show reduced electrical shorting and series resistance, and as a consequence, a further improved power conversion efficiency of 2.5% is recorded. S Online supplementary data available from stacks.iop.org/Nano/22/085706/mmedia
15 January 2016 in ACS Applied Materials & Interfaces
19 January 2012 in Advanced Energy Materials