30 October 2023 in Heliyon
This paper carried out a comparative review on the current trends in the conversion of palm oil waste into value-adding products by the Cameroonian and Malaysian palm sectors/researchers. Trends like composting, composite, pulping, mushroom cultivation, pyrolysis, aerobic and anaerobic digestion of palm biomass were studied as means to reduce the bulk, and to curb emissions of Greenhouse gas while producing value. Base on this research, limited works has been done on the conversion of palm biomass into value in Cameroon, whereas Malaysian palm researchers have employed all of these techniques and producing values from them. It was discovered that the various conversion process have different degree of feasibility and sustainability, and the end-products have different applications. Conversion process like pyrolysis is relatively faster, it could take just a few minute and the end-product which is biofuel have a wide range of applications; in contrast to composting which could take up to 180 days to mature and the end-product is limited to fertilizer. This research aims to sensitize the palm sector in Cameroon to the various processes that can be applied to sustainably manage palm waste. A priority table was also developed based on the feasibility and sustainability of the various conversion processes to serve as a guide towards sustainable waste management in the agro-industrial palm sector in Cameroon and a step towards industrialization.
18 October 2024 in Heliyon
This study investigated the pyrolysis of automotive plastic wastes (APW) for the production of diesel-grade oil products using a modified calcium bentonite clay catalyst. The research aimed to optimize the process for maximum oil yield and diesel range organics yield. The APW was characterized by its chemical composition and physical properties and the optimal temperature and catalyst amount were determined for maximum oil yield and diesel range hydrocarbons. The results showed that the APW contained mixed Acrylonitrile Butadiene Styrene (ABS), High/Low Density Polyethylene (H/LDPE), Polypropylene (PP), Polystrene (PS) and fiberglass, with a large quantity of volatiles and ash. The average oil yield was higher in the catalytic process compared to that in the thermal process. Generally, higher temperature above 450 produced waxy oil, thus lower temperature favoured more Diesel Range Organics (DRO). Both processes yield similar yields of C8–C24 DRO, and in both cases, lower temperature favoured high yield of C8-C24 hydrocarbons. The catalyst significantly increased the yield of oil, but did not significantly increase C8–C24 DRO yield. The optimal conditions for a maximum oil yield of 78.6 % and DRO yield of 79.5 % was a temperature of 416 and 24.3 wt% clay. Thus, the modified calcium bentonite clay can be used to improve oil yield from pyrolysis of APW. The oil produced had properties such as calorific value (49.85 MJ/kg), flash point (113 ) and total aromatics 3.55 area%, similar to those of commercial diesel, and comprised mostly of 2,4-Dimethyl-1-heptene (25.37 ± 2.01 %) of thermal and 2, 4 – Dimethyl – 1 – heptane (23.44 ± 2.42) in the catalytic process. The study suggests further research to explore different catalysts, maximization of both DRO and gasoline range organics, recover energy from residues, and conduct techno-economic assessments for plant-scale operations. Additionally, policies on the management of end-of-life vehicles should include provisions for stripping and segregation of plastic components by accredited providers for the purpose of plastics recycling.
22 November 2023 in South African Journal of Chemical Engineering