To assess the prediction accuracy of existing cavitation models for in-nozzle string cavitation, elucidate the accumulation characteristics of the vortex flow field on the bubbles, and explore the influence of non-condensable gas in the string cavitation inception and development, a modified cavitation model has been proposed. This modified model is expected to be more precise in predicting string cavitation. In this paper, numerical simulations are carried out in conjunction with visualization experiments, where discrete-phase particles represent the non-condensable gas. Results indicate that the current Zwart–Gerber–Belamri cavitation model fails to account for the effect of the non-condensable gas factor in the modeling process, leading to inaccurate predictions of string cavitation within the nozzle. To address this issue, modification of the mass source term of the cavitation model is proposed based on the Rayleigh–Plesset equation and the bubble surface pressure equation. The modified model demonstrates better accuracy in predicting string cavitation inside the nozzle. The gas nuclei inside the fuel tend to accumulate around the vortex core, influenced by the internal vortex flow field, which further contributes to the string cavitation inception and development. This study proposed and evaluated a more accurate cavitation model and further improved the cavitation initiation and development mechanism.
Fuel jet primary breakup strongly depends on the in-nozzle cavitation phenomena found in the high-pressure fuel injector nozzle. Nevertheless, limited attention has been paid to the mechanism of fuel jet primary breakup induced by in-nozzle vortex-induced string-type cavitation. This study involves simulations of in-nozzle string cavitating flow and simultaneously near-nozzle jet primary breakup process using large eddy simulation and volume of fluid, aiming at revealing the effects of string cavitation on jet primary breakup. The numerical results are in good agreement with experimental data in terms of string cavitation intensity, interfacial topology of jet, and spray spreading angle. The numerical investigations indicate that the external surface of the jet experiences Kelvin–Helmholtz instabilities, which results in the development of circumferential and axial surface waves at the fuel film surface. Subsequently, the fuel film surface undergoes progressive wrinkling, resulting in its breakup into multiple ligaments and large droplets. On the internal side of the jet, back-suction of air caused by negative pressure and its interaction with cavitation vapor at the core of the jet lead to the collapse of vapor bubbles. The resulting pressure waves and micro-jets facilitate the detachment of liquid sheets from the internal surface of the jet. Analysis of the enstrophy transport equation indicates that the driving mechanism behind string cavitation jet breakup further downstream is the baroclinic torque term, which is responsible for the generation of a cascade of smaller vortical structures. This effect dominates over vortex stretching and dilatation terms.
Cavitation inside fuel-injector nozzle governs injection accuracy, pressure oscillations, and subsequent atomization, yet its multi-scale dynamics remain difficult to predict—particularly for methanol. We develop an enhanced Euler–Lagrange multi-scale coupling framework that combines a volume-of-fluid (VOF) description of the continuous cavitating flow with a discrete bubble model (DBM) for Lagrangian microbubbles. The approach integrates a simplified Rayleigh–Plesset formulation for bubble dynamics and two-way momentum and mass coupling between phases. Applied to a scaled-up nozzle representative of engine injectors, the method is validated against experiments and a baseline VOF simulation. Across three injection pressures (0.40, 0.50, and 0.65 MPa), the flow exhibits quasi-periodic behavior: sheet cavitation growth, cloud-cavitation shedding, and subsequent collapse. With increasing injection pressure, cavitation intensity strengthens, the number of discrete bubbles rises markedly, and repeated collapses amplify mid-to-high-frequency pressure fluctuations, demonstrating the pivotal role of bubble dynamics in shaping the pressure spectrum. Relative to the standalone VOF model, the VOF–DBM framework improves volumetric-flow prediction, reducing errors by a factor of 2.3–3. Bubble statistics further show that the bubble number increases with increasing Pin and then approaches a constant level, while the Sauter mean diameter [SMD (D32)] remains nearly invariant at 19–23 μm, indicating weak sensitivity of bubble size to the operating condition. The present multi-scale methodology yields mechanistic insight into cavitation structure–bubble interactions and offers a robust, transferable numerical tool for optimizing nozzle design and methanol-based fuel-injection systems.
1 February 2011 in Adsorption Science & Technology
Raw palygorskite was modified by the addition of selected surfactants, viz. hexadecyltrimethylammonium bromide (CTAB), cetylpyridinium bromide (CPB) and octadecyldimethylbenzyl ammonium chloride (ODBAC). These modified clays were used as sorbents for the adsorptive removal of 2,6-dichlorophenol (2,6-DCP) from aqueous solution. Characterization of the sorbents was achieved by Fourier-transform infrared (FT-IR) analysis, nitrogen adsorption/desorption measurements and particle-size analysis. The adsorptive performance of the modified palygorskites towards the removal of 2,6-DCP from aqueous solution was studied by batch methods. In addition, the influence of contact time, pH and temperature on the adsorption process was investigated in detail. The equilibrium data for the three modified sorbents were well fitted by the Langmuir model. It was found that the monolayer adsorption capacity increased with increasing contact time and solution temperature, respectively. Application of the pseudo-first-order and pseudo-second-order kinetic models to the kinetic data showed that the pseudo-second-order kinetic model provided an excellent fit (R2 > 0.99). In addition, the film diffusion, pore diffusion and intra-particle diffusion models were also used to investigate the adsorption mechanism. Intra-particle diffusional analysis indicated that 2,6-DCP molecules diffused rapidly during the initial adsorption stage, followed by a slower stage and finally the establishment of an equilibrium condition. Thermodynamic studies showed that the adsorption of 2,6-DCP onto the three sorbents examined occurred spontaneously and that the process was endothermic in nature. The results indicate that the surfactant-modified palygorskite exhibited a significant potential as a sorbent material for the removal of phenolic compounds from aqueous solution.
5 July 2026 in International Journal of Engine Research
Cavitation commonly occurs in fuel injector nozzles, yet the mechanism by which needle valve eccentricity affects in-nozzle string cavitation remains unclear. This study focuses on the development of string-cavitating flow fields and vortex structures influenced by needle valve eccentricity within the nozzle orifice. The Reynolds Stress Model, along with the Volume of Fluid method and the modified Zwart–Gerber–Belamri cavitation model, was employed to evaluate the effects of varying needle valve eccentric distances and orientations on internal flow dynamics. Increasing needle valve eccentricity results in a significantly asymmetric cavitation distribution within the nozzle, enhances vorticity in the main flow region, and strengthens cavitation-vortex interactions, thereby suppressing pressure oscillations. Needle valve eccentricity also significantly alters the intensity and frequency of phase transitions (i.e. fuel vaporization and condensation) within the nozzle orifice. Additionally, needle valve eccentricity promotes vortex instability and increases vortex breakup frequency, while reducing the nozzle flow coefficient by approximately 1–17% compared with the centrally symmetric reference geometry. Needle valve eccentricity fundamentally alters the internal cavitating flow, which can be detrimental to spray uniformity and which is likely to influence subsequent atomization and combustion processes. These findings lay a foundation for optimizing nozzle design to alleviate cavitation-induced flow instability and enhance spray performance.
Method of floating car data (FCD) is effective for traffic state estimation. However, using only position and time information sent by FCD vehicles, for short road segments with long cycle time, the averaged FCD travel time could not reflect real traffic state due to the sample size limitation. A data preprocess method is proposed aiming at improving estimation accuracy at signalized road segments using existing sample data and effective green ratios. It is shown both in theoretical proofs and empirical results that the method is effective and practical.