Optics InfoBase is the Optical Society's online library for flagship journals, partnered and copublished journals, and recent proceedings from OSA conferences.
We report on a Tm:fiber master oscillator power amplifier (MOPA) system producing 109 W CW output power, with >15 dB polarization extinction ratio, sub-nm spectral linewidth, and M2 <1.25. The system consists of polarization maintaining (PM) fiber and PM-fiber components including tapered fiber bundle pump combiners, a single-mode to large mode area mode field adapter, and a fiber-coupled isolator. The laser components ultimately determine the system architecture and the limits of laser performance, particularly considering the immature and rapidly developing state of fiber components in the 2 μm wavelength regime.
A Tm-doped large mode area (LMA) silica fiber laser has been locked to a stable wavelength of using a volume Bragg grating (VBG). The measured spectral width of the laser output was , limited by the spectrometer resolution. Although this laser had modest output and slope efficiency (41%), this new approach to spectrally limiting the output of LMA fiber lasers is inherently extendable to kilowatt powers, opening up several applications including high-power pulsed fiber lasers and spectral beam combining. Performance characteristics of the laser compared to one using a dielectric mirror as a high reflector are described, and the results imply low VBG losses.
We report lasing and amplification in a rod type thulium-doped photonic crystal fiber with 80 μm core diameter. The rod is pumped with a 793 nm laser diode and produces more than 20 W output power at a beam quality . The laser/amplifier has a slope efficiency of relative to absorbed pump power with a lasing threshold at 28.6 W. The output wavelength in the lasing configuration can be tuned over 180 nm from 1810–1990 nm.
In this paper we report the development of nanosecond-pulsed fiber laser technology for the next generation EUV lithography sources. The demonstrated fiber laser system incorporates large core fibers and arbitrary optical waveform generation, which enables achieving optimum intensities and other critical beam characteristics on a laser-plasma target. Experiment demonstrates efficient EUV generation with conversion efficiency of up to 2.07% for in-band 13.5-nm radiation using mass-limited Sn-doped droplet targets. This result opens a new technological path towards fiber laser based high power EUV sources for high-throughput lithography steppers.