1 May 2019 in Optics and Lasers in Engineering
1 November 2018 in Optics and Lasers in Engineering
1 February 2000 in Physica Status Solidi (b)
20 March 2023 in Optics & Laser Technology
11 November 2019 in Optics Express
Camera calibration is an important part of high-precision optical measurement, which is especially difficult in the micro-nano field. Based on the integrated correlation calculation and CCD moiré method, this paper describes the development of a lens calibration technique called the Integrated Colour CCD Moiré Method (ICCM). The CCD moiré fringes, formed by superimposing a periodic optical signal of a specimen grating with a CCD target array or a Bayer filter array, significantly enlarges the deformation modulated by lens distortion and the calibration plate attitude (i.e. the rotation angle relative to the camera coordinate system). To measure lens distortion using CCD moiré, the deformation pattern that is governed by the lens distortion, specimen grating attitude and carrier was used to construct a CCD fringe image. If the constructed CCD fringe image based on the trial lens distortion and rotation angles have a maximum similarity to the captured CCD moiré image, the lens distortion and rotation angles are correctly inversed. Particle swarm optimisation algorithm was selected to search for the true value so that the accuracy and robustness could be improved. Numerical experiments verified that the ICCM method developed in this work can simultaneously inverse the lens distortion, rotation angle and the grating pitch with high precision. The lens distortion of the metallographic microscope has been successfully characterised by the developed method with an 833 nm pitch grating. Simulations and experiments showed that ICCM is an intuitive, accurate, anti-noise and robust distortion calibration method.
15 March 2018 in Measurement Science and Technology
Three-dimensional (3D) deformation measurements are a key issue in experimental mechanics. In this paper, a displacement field correlation (DFC) method to measure centrosymmetric 3D dynamic deformation using a single camera is proposed for the first time. When 3D deformation information is collected by a camera at a tilted angle, the measured displacement fields are coupling fields of both the in-plane and out-of-plane displacements. The features of the coupling field are analysed in detail, and a decoupling algorithm based on DFC is proposed. The 3D deformation to be measured can be inverted and reconstructed using only one coupling field. The accuracy of this method was validated by a high-speed impact experiment that simulated an underwater explosion. The experimental results show that the approach proposed in this paper can be used in 3D deformation measurements with higher sensitivity and accuracy, and is especially suitable for high-speed centrosymmetric deformation. In addition, this method avoids the non-synchronisation problem associated with using a pair of high-speed cameras, as is common in 3D dynamic measurements.