Conventional surface mounted permanent magnet synchronous motor (SPMSM) at high speed has large iron loss in the stator and eddy current loss in the rotor. The higher the eddy current loss, the higher the rotor temperature. Therefore, a plan to reduce the loss must be devised. Also, weight at high speed is related to mechanical stiffness and electromagnetic vibration noise. Therefore, a plan to reduce the weight must be devised. In this paper, we propose to change the shape of the conventional 15 kW 110 000 rpm class into a slotless shape. A process of protocol change was proposed, and the sizing design of the rotor and stator was devised. The advantages of the proposed shape were verified through performance comparison through finite element analysis (FEA) and mechanical stiffness analysis.
A ring magnet attached under the safety window motor is used for detecting the position of the window with a hall sensor. A dead zone that the magnetic flux is weak appears between the poles of the ring bonded magnet and the larger the angle of the dead zone, the more difficult it is to detect the precise position of window. In this study, the shape of polar anisotropic magnetizing yoke with a magnetic flux concentration structure is proposed to reduce the range of the dead zone. A magnetic equivalent circuit (MEC) was presented to prove the theoretical validity. With the design variables as the inner width, outer width, and magnetic flux angle of the teeth of the yoke, the response value for the dead zone minimization was obtained using the response surface method, which is an optimization technique. And to examine this result as the tendency of flux line change in the model, finite element analysis was performed, and the final model was obtained. The prototype of the final model was manufactured, and the validity of the analysis result was verified.
By applying the halbach arrangement, an integrated magnetic bearing structure can be designed that secures the space inside the rotor core as a space for inserting the magnetic bearing. In this case, since the bearing is present inside the rotor, the bearing magnetic flux for controlling the rotor position is affected by the magnetic field of the permanent magnet and the rotating magnetic field of the phase winding of the stator. At this time, in a specific combination of the number of pole slots, the arrangement of the windings of the stator facing the bearing teeth appears asymmetrically for each bearing phase. In this paper, for more linear control, the formula for the number of stator pole slots and the number of bearing teeth to eliminate structurally generated force asymmetry was presented, and the formula was verified by comparative analysis of the force waveform for each axis. The validity of the proposed model was verified using the finite element method.