28 November 2023 in IEEE Transactions on Dielectrics and Electrical Insulation
So far, silicone rubber (SiR) insulators have been widely used in the power industry all over the world, due to their outstanding insulation properties with high reliability. In practice, some of the insulators are applied in the remote places with harsh environmental conditions such as high altitude, high temperature and high humidity etc. Herein, the currently-existing aging mechanisms have been investigated, as some novel insights into these testing and evaluation methods have been proposed. Via the investigation, it can be found that thermal oxygen aging tends to occur, when insulators are exposed to an environment surrounded by hot air. To analyse the different aging mechanisms of SiR insulator sheds, four types of aging testing and evaluation methods have been systematically summarized, based on the surface structural, chemical, optical, and electrical properties. The conclusion is that non-destructive and non-contact methods, such as HSI, along with the multi - source information fusion methods, are becoming increasingly popular in the assessment of silicone rubber insulator sheds aging. These research efforts provide assurance for reducing the incidence of pollution flashover accidents in power transmission lines and ensuring the safe and stable operation of power transmission and transformation equipment.
13 February 2023 in IEEE Transactions on Instrumentation and Measurement
Pollution flashover of insulators has been viewed as a common issue existing in the area of power system for a long term. However, traditional detection methods such as equivalent salt density and leakage current can hardly satisfy the requirements of the progressing smart grid. Herein, a novel highly-efficient method is proposed for classifying the pollution degree detection of insulators based on hyperspectral technology. The insulating sheets and actual insulators were set as the research object and their hyperspectral images are obtained. Moreover, the data for describing the characteristic wavelengths and the G color components of the samples were extracted from the images as the characterization of the equivalent salt deposit density (ESDD) and non-soluble deposit density (NSDD) respectively. The ESDD and NSDD detection model is established based on the multiple linear regression (MLR) algorithm and the random forest (RF) algorithm. Ultimately, the proposed model reaches detection accuracy of above 84% on the insulating sheets and 75% on the actual insulators, which can be viewed as acceptable. The hyperspectral imaging technique has considerable potential for the non-contact detection of ESDD and NSDD.
1 February 2024 in Recent Advances in Electrical & Electronic Engineering (Formerly Recent Patents on Electrical & Electronic Engineering)
Background: This paper proposes a defect identification method for vehicle-mounted cable terminals in electric multiple units (EMUs) based on the improved Graham angle field and residual network to address the issue of low recognition accuracy caused by the lack of partial discharge (PD) and identification data for Ethylene Propylene Rubber (EPR) cable terminal defects. Methods: The improved Gramian angular field (IGAF) characteristic transformation method was used to transform the PD one-dimensional time-series signal into a two-dimensional one after cable terminals with four common insulation defects were constructed, and a PD detection platform was built. Finally, an anti-aliasing downsampling module and attention mechanism were added to the residual network ResNet101 model. The Center loss and Softmax loss functions were integrated to increase accuracy for training and recognition classification. Topological feature images improved the distinguishability of defect categories. Results: The test results showed that the diagnostic method has an accuracy rate of 97.3% for identifying PD at the cable terminal. Conclusion: The proposed diagnosis model has higher recognition accuracy and better balance than other conventional fault diagnosis methods, making it suitable for diagnosing high-voltage cable faults in EMU trains.
10 April 2024 in IEEE Transactions on Vehicular Technology
As the unique power-discharging channel for high-speed trains, the ‘train-rail’ mobile coupling grounding system plays a vital role in sending the traction power back to the terrestrial substations, through the electrical contact between the rotating wheel and the steel rail. The whole system is composed of two kinds of grounding modes: working grounding is in charge of draining the traction power into the rail track; the protective grounding provides the reference grounding potential for the vehicle-mounted equipment. Different from the fixed terrestrial grounding technique normally implemented in power system, when the relative motion occurs between the train and the rail, both the ‘catenary-to-train’ and ‘train-to-ground’ impedances vary transiently, which may lead to the current flowing through each grounding wheel varying unpredictably. Herein, the ‘catenary-train-rail’ mobile coupling grounding model was built based on the equivalent circuit modeling technique for evaluating the transiently-varying tendency of the grounding impedances and currents flowing through each grounding wheel. To cope with different operational conditions, the adjustable grounding impedance methodology is firstly proposed for adapting the unpredictable variation of the grounding impedance, when the relative motion occurs between the train and the rail. Ultimately, the validity of the novel grounding system applying the adjustable grounding impedance technology is verified under different operational conditions, with the consideration of both TB current and voltage.
1 January 2026 in IEEE Transactions on Instrumentation and Measurement
22 August 2026 in High Voltage
Radiative cooling holds potential for outdoor transformers in operation due to its zero‐energy consumption and high adaptability and has demonstrated effective heat dissipation in simulations of small distribution transformers. Accurate calculation of the transformer temperature rise and the radiative cooling effect is crucial for practical application. However, the existing method for evaluating the heat dissipation effect of radiative cooling technology on transformers approximates losses by using a constant heat source, neglecting the impact of temperature on losses, resulting in low accuracy in radiative cooling power. Consequently, this study introduces an electromagnetic‐thermal‐fluid‐radiation multiphysics coupling approach based on finite element analysis. This method accounts for the two‐way coupling of electromagnetic and thermal fields, along with the nonuniform distribution of losses. Firstly, based on the heat transfer process of an oil‐natural‐air‐natural (ONAN) transformer, a small test platform (tank dimensions of 30 cm × 20 cm × 30 cm, rated power of 250 W and similar to those of a 10 kVA–10 kV/220 V single‐phase ONAN transformer in dimensions and loss) is built to evaluate the proposed method's accuracy against the existing method. Comparative analysis shows that the proposed method yields maximum errors of −4.0% and −4.8% in temperature rise and radiative cooling heat dissipation effect calculations, respectively, demonstrating a significant accuracy improvement of 16.2% and 25.3% over the existing method. Finally, the radiative cooling heat dissipation characteristics of an 800 kVA–10 kV/3 kV three‐phase ONAN transformer (total losses amount to 8557.3 W) are simulated and analysed using the proposed method. This study serves as a guiding framework for the accurate estimation of radiative cooling power in outdoor power transformers.