Polymers used on low earth orbit (LEO) spacecraft surface suffer from an ultraviolet (UV) irradiation and orbital atomic oxygen (AO) erosion. These degradations may change the total electron emission yield (TEEY) of the materials and ultimately result in unexpected surface charging. In this paper, we chose polyimide (PI) film, a thermal control material, and carried out two types of ground-based degradation. The degradation methods were UV irradiation with five different equivalent solar hours, and AO erosion with two fluences equivalent to 0.5 and 1 year LEO flight time, respectively. Using an Auger microscope-based TEEY measurement system with a scanning measuring method, the TEEY of virgin and degraded PI films were tested and analyzed comparatively. The X-ray photoelectron spectrum, field-emission scanning electron microscope, and computational simulations were also used for element bonds analysis, roughness imaging, and electron depth calculation to discover the mechanisms of the degradation and their effects on the TEEY of the material.
1 December 2012 in IEEE Transactions on Dielectrics and Electrical Insulation
To evaluate spacecraft charging level and predict surface and internal electrostatic discharging (ESD) probability, it is important to know the charge transport properties of high insulation materials, such as epoxy resin/glass composition (FR4), Teflon and polyimide. In present work, the charge transport properties of the space insulators are revealed by a bipolar charge transport (BCT) model combined with genetic algorithm (GA). It has been found that the BCT model can be used to simulate the experimental surface potential decay (SPD) results, and these two results are in good agreement with each other. The BCT model consists of charge injection, conduction, trapping, detrapping, and recombination processes. Stochastically initiating a series of charge transport parameters by GA, we can compute the SPD curves of materials by the BCT model. Used GA operates, the best fitting SPD curve of the experimental results can be obtained. From the comparison of the calculated and the experimental SPD results, we obtain the charge transport properties of FR4 and polytetrafluoroethylene (PTFE).
27 December 2018 in IEEE Transactions on Plasma Science
Coverglass has been widely used to cover the solar cells of solar arrays for space power generation. Coverglass with high antireflection is widely used to protect the solar arrays from performance deterioration due to irradiation of space ultraviolet, protons, electrons, atomic oxygen (AO), and so on. Along with these, thermal cycles and/or shock may accelerate the decay synergistically affecting the threshold voltage of electrostatic discharge (ESD) on the coverglass. In order to reveal the effect of aging due to AO interaction on the ESD threshold, several coverglass samples have been exposed to low earth orbit grade AO generated by the CO2 laser on the ground. Later, both pristine and AO-exposed coverglasses have been irradiated by energetic electrons to generate artificial arcing (ESD) under high vacuum system. Statistical analysis and Weibull distribution confirm that the threshold voltage of ESD is lower on the aged coverglass than virgin.
Nanosatellites are generally used in low Earth orbits for diverse applications such as remote sensing, space weather monitoring, technology demonstrations, and even system engineering education. During their orbit lifetime, they often fly through the polar region and/or the South Atlantic Anomaly zone. Electrons at these regions are sufficiently energetic enough to penetrate into the thin aluminum exterior shield of nanosatellites to reach the interior electronics. Hitting these electrons may cause differential charging on electronics that is ultimately responsible for internal electrostatic discharge. On the ground, energetic electron beam experiments are conducted on the plastic encapsulated microcircuits samples that reveal electrical charging and discharging on the electronics residing inside the nanosatellites. Conformal-coated electronics show effective charging mitigation due to high energetic electrons.
1 January 2015 in International Journal of Electrical Energy
Entanglement-based quantum key distribution (QKD) offers robust key distribution through intrinsically correlated measurements, ensuring any eavesdropping attempt introduces detectable disturbances. Although practical implementations are primarily limited to fixed fiber networks, extending QKD to mobile platforms like drones or small satellites introduces challenges in optical alignment, weight, and power consumption. This work outlines the core components and architecture for implementing BBM92-based QKD in mobile settings. A compact polarization Sagnac interferometer utilizing a PPKTP crystal provides a stable and efficient method for generating entangled photon pairs. Supporting subsystems include a polarization compensation system, a detector module, and an acquisition, pointing, and tracking (APT) system. To assess performance under realistic conditions, we simulate photon loss, detector efficiency, and quantum bit error rates using the SQUANCH framework. Results show an average key generation rate of 5.43 bits/s, a final secure key length of 45.27 bits per block, and a QBER of 4.5%.