This study examines the enhancement of dark sequential fermentation and photofermentation of organic solid waste using magnetite and substrate pre-treatment for hydrogen production within the context of transitioning to cleaner energy sources, particularly low-carbon hydrogen. Experimental dark fermentation and photofermentation apparatuses were used, utilizing microorganisms to decompose biomass at a mesophilic temperature (35 °C) of Organic Fraction of Municipal Solid Waste (OFMSW), inoculated with UASB sludge and enhanced with magnetite. A dosage of 120 mg/L of magnetite was the most effective, yielding an average value of 4144 mL H2/gVS. Additionally, the analysis revealed that the levelized cost of hydrogen (LCOH) decreases as more organic waste is utilized, making biohydrogen production a sustainable option, reaching USD 5/kg of OFMSW. Ultimately, generating hydrogen from organic waste can help reduce greenhouse gas emissions and promote a cleaner energy matrix.
This study aimed to obtain the energy recovery potential of the biogas produced from anaerobic digestion (AD) of the sludge from a wastewater treatment plant (WWTP), including the use of biochar as an additive for substrate co-digestion and catalyst for methane production. We carried out the following steps: chemical–physical laboratory analyses of sludge samples; the building, operation, and monitoring of an experimental prototype of a batch bioreactor of 2.5 L for the AD of the sludge (with and without the addition of charcoal); qualitative measurements of biogas; the study of charcoal morphology; and the projection of useful energy generation from the AD sludge after treatment. A study on the economic viability and avoided greenhouse gas (GHG) emissions was performed based on the experimental results. The substrate showed alterations in all the physicochemical parameters evaluated after AD, such as a reduction of 35% in the biochemical oxygen demand (BOD) analysis; the experiment carried out using biochar showed positive results regarding the speed of CH4 production and a greater potential for energy recovery. Enterprises from 2000 kW onwards would present an internal rate of return (IRR) equal to or higher than the minimum attractiveness rate (MAR) of 15%. The USD 95.28/MWh tariff presented economic feasibility for the studied scenarios. WWTPs that produce enough sludge to generate power of 2000 kW would need to process the waste of 117,200 inhabitants with charcoal addition and 136,000 without charcoal. It would be possible to avoid the emission of 2307.97 tCO2/year (2000 kW). According to the results obtained, this study revealed that using alternative energies based on anaerobic digestion and biochar can generate positive results regarding methane production, and its application as an energy source in a WWTP proved to be economically viable at a specific level of power production.
This study evaluates the energy recovery from biogas generated through the anaerobic co-digestion of the Organic Fraction of Urban Solid Waste (OFUSW) with lime mud (LM). This approach aims to mitigate environmental impacts such as greenhouse gas emissions and pollution while promoting energy recovery for a diversified power matrix. Life cycle assessment (LCA) methodology, in accordance with the NBR ISO 14040 and 14044 standards, was used to compare five scenarios for the disposal of LM. The results highlight that the co-digestion scenario showed significant environmental benefits in 8 out of the 18 categories evaluated, such as reductions in eutrophication, acidification, and climate change. Additionally, the digestate produced helped avoid further environmental impacts. The integration of urban and industrial waste demonstrates the potential to enhance biogas productivity, generate savings for the pulp and paper industry, and promote sustainable practices. The innovation lies in the synergistic use of LM as a co-substrate, improving the efficiency of the anaerobic process and maximizing biogas production. This research provides a solid scientific foundation for decision-making in public policies and industrial practices, positioning itself as a viable and innovative proposal for the integrated management of solid waste and sustainable energy.
Background: Dark fermentation (DF) of organic solid waste (OSW) is a promising route for sustainable biohydrogen (bioH2) production, but it is often limited by slow interspecies electron transfer and by acidification of the medium. Promoting direct interspecies electron transfer (DIET) with conductive additives is a candidate strategy to intensify the process. Objective and methods: This study compares the effect of magnetite (Fe3O4), granular activated carbon (AC), and laboratory-synthesized nickel–iron-doped activated carbon (DC) on the DF of genuine post-consumer food waste. Batch assays were conducted in 2.1 L anaerobic reactors under mesophilic conditions (35 °C), in triplicate, using food waste as the substrate and raw UASB sewage sludge as a mixed inoculum, without pH control. Biohydrogen was quantified with a portable biogas analyzer and expressed as mL H2/g COD removed; the additives were characterized by SEM–EDS, and yields were compared by one-way ANOVA with Tukey post hoc test (α = 0.05). Main findings: Additive type had a highly significant effect on biohydrogen yield (F(6,14) = 48.7; p < 0.001; η2 = 0.954). DC at 4 g achieved the best performance, reaching 0.271 mL H2/g COD removed (≈4.5-fold higher than the additive-free control) and COD removals of 65.8–72.4%, whereas magnetite produced only sporadic, non-reproducible gains and undoped AC gave a modest, consistent improvement. Excessive acidification (final pH 2.5–3.1), attributed to the accumulation of volatile fatty acids under the deliberately unbuffered conditions, was the main operational limitation and is interpreted as a conservative ceiling on the yields reported here. Prospects: Metal-doped carbonaceous materials emerged as the most robust and reproducible strategy for intensifying DF of food waste; future work should couple this route with pH buffering and with electrochemical and microbial-community analyses to confirm the DIET contribution and to support scale-up in integrated biorefineries.
Energy recovery from sewage sludge represents a sustainable and technically feasible alternative to promote integration between environmental sanitation and renewable energy generation. This study presents a case analysis of the municipality of Ribeirão Preto, São Paulo, focusing on comparisons between two wastewater treatment systems: an Upflow Anaerobic Sludge Blanket (UASB) reactor and a continuous-flow activated sludge system. Using the UASB configuration, we prepared a preliminary design of a treatment plant based on population and effluent generation projections over a 20-year horizon. The estimated sludge and biogas production allowed us to simulate electricity generation then. The comparative economic assessment, which employed Net Present Value (NPV) and Internal Rate of Return (IRR) indicators in accordance with ANEEL Resolution No. 482/2012, showed that the UASB system yields hard superior methane (up to 3235.6 m3/day) and higher electricity generation potential (1839.7 MWh/year) than the activated sludge system (1990 m3/day and 1654.3 MWh/year, respectively). Both systems were economically viable, with a positive NPV, an IRR of up to 16.83%, and payback periods starting in the first cycle. Furthermore, we estimated the cost per cubic meter of generated biomethane, conducted a sensitivity analysis, and assessed the impact on the most important economic indicators, all to identify the advantages and disadvantages of the proposed project and the best use of the generated biogas. This analysis showed that it is possible to recover energy from sewage treatment systems while also reusing sewage sludge for agricultural applications, thereby highlighting additional environmental and economic benefits, particularly in regions with a strong presence of agribusiness, e.g., Ribeirão Preto.