This paper presents a two-dimensional experimental study of the interaction of wet dam-break bores with a fixed structure, regarding the evolution of the incident flows and the resultant green water events on the deck. The study employs image-based techniques to analyse flow propagation from videos taken by high-speed cameras, considering five different shipping water cases. The features of small air-cavities formed in some green water events of the plunging-dam-break type were analysed. Then, the spatial and temporal distribution of water elevations of the incident bores and green water were investigated, providing a database to be used for model validations. Some guidelines for the selection of the freeboard exceedance, which is of relevance for green water simulations, were provided. Finally, the relationship between the incident bore and water-on-deck kinematics was discussed. The proposed study can be used as a reference for performing simplified and systematic analyses of green water in a different two-dimensional setup, giving high-resolution data that visually capture the flow patterns and allow model validations to be performed.
This paper presents a techno-economic assessment of hydrokinetic energy of Cozumel Island, where ocean currents have been detected, but tourist activities are paramount. The main objective of this research is to identify devices that have been used to harvest hydrokinetic power elsewhere and perform an economic analysis as to their implementation in the Mexican Caribbean. First, the energy potential of the area was evaluated using simulated data available through the HYCOM consortium. Then, for four pre-commercial and commercial turbines, technical and economic analyses of their deployments were performed. Socio-environmental constraints were reviewed and discussed. Three optimal sites were identified, with an average annual hydrokinetic energy density of 3–6 MWh/m2-year. These sites meet the socio-environmental requirements for marine kinetic energy harvesting. Of the turbines considered in the analysis, the best energy price/cost ratio is that of SeaGen device, with a maximum theoretical energy extraction of 1319 MWh/year with a Capacity Factor of 12.5% and a Levelised Cost of Energy (LCOE) of 1148 USD/MWh. Using this device, but assuming a site-specific design that achieves at least 25% of Capacity Factor, 20-year useful life, and a discount rate of 0.125, the LCOE would be 685.6 USD/MWh. The approach presented here can be applied for techno-economic analyses of marine turbines in other regions.
An environmental impact assessment (EIA) was made for the operation of a 1MWe open-cycle OTEC plant on Cozumel Island, Quintana Roo. Due to its bathymetric characteristics and its proximity to the population center, the ideal location for the placement of the OTEC plant is in the western coastal area of the island. An environmental inventory was developed in which the susceptible factors to be impacted were described (air, soil, water, landscape, geology and flora). The essential components of the OC-OTEC PLANT operation process were studied: vacuum pump, flash evaporator, turbine, condenser and pipes. An impact matrix (Leopold matrix) was created, which prompts to impacts on the environment list, generated by the OC-OTEC PLANT operation: CO2 emissions; nutrients dragged to the surface; artificial reef effect/contamination by heavy metal salts; drag and compression of organisms; redistribution of oceanic water bodies; impacts by organic antifouling chemicals; noise; illumination; turtle nesting alteration; brine discharges; cause significant public controversy; alteration and interruption of migration routes; and waste, among others. Once the most significant impacts were assessed through the Leopold matrix, corrective and preventive measures were established on those actions, in order to minimize their negative impact on the environment.