Here, rational design electrodes are fabricated by mixing MXene with an aqueous solution of chloroauric acid (HAuCl₄). In order to prevent MXene from self-restacking, the groups of -OH on the surface of Ti₃C₂T_x nanosheets underwent a one-step simultaneous self-reduction from AuCl₄-, generating spaces for rapid ion transit. Additionally, by using this procedure, MXene’s surface oxidation can be decreased while preserving its physio-chemical properties. The interlayered MX/Au NPs that have been obtained are combined into a conducting network structure that offers more active electrochemical sites and improved mass transfer at the electrode–electrolyte interface, both of which promote quick electron transfer during electrochemical reactions and excellent structural durability. The Ti₃C₂T_x-AuNPs film thus demonstrated a rate performance that was preferable to that of pure Ti₃C₂T_x film. According to the results of the characterization, the AuNPs effectively adorn the MXene nanosheets. Due to the renowned pseudocapacitance charge storage mechanism, MXene-based electrode materials also work well as supercapacitors in sulfuric acid, which is why MXene AuNPs electrodes have been tested in 3 M and 1 M H₂SO₄. The symmetric supercapacitors made of MXene and AuNPs have shown exceptional specific capacitance of 696.67 Fg⁻¹ at 5 mVs⁻¹ in 3 M H₂SO₄ electrolyte, and they can sustain 90% of their original capacitance for 5000 cycles. The highest energy and power density of this device, which operates within a 1.2 V potential window, are 138.4 Wh kg⁻¹ and 2076 W kg⁻¹, respectively. These findings offer a productive method for creating high-performance metal oxide-based symmetric capacitors and a straightforward, workable approach for improving MXene-based electrode designs, which can be applied to other electro-chemical systems that are ion transport-restricted, such as metal ion batteries and catalysis.

Flexible strain sensors based on 2D materials have been proven effective for wearable health monitoring devices, human motion detection, and fitness applications. These sensors are flexible, light, and user-friendly, but their sensitivity and detection range need to be enhanced. Among many 2D materials, MXene attracts much interest due to its remarkable properties, such as high electrical conductivity, excellent mechanical properties, flexibility, and good hydrophilicity. However, it is a challenge to fabricate strain sensors with extreme sensitivity and a wide sensing range. In this work, a multifunctional, cost-effective, and highly sensitive PDMS-encapsulated MXene@polyester fabric strain sensor was fabricated. Firstly, complete adsorption of MXene within the fabric formed conductive networks, and then PDMS was used to endow superhydrophobicity and corrosion resistance. The strain sensor demonstrated multifunctional applications and outstanding performance, such as long-term stability (over 500 cycles) and a wide sensing range (8%). The proposed sensor has promising potential for wearable electronic devices such as health monitoring systems and physiological sensing applications.