Bharti Malvi

Dr. Bharti Malvi

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 November 2021 in Surface Engineering
Verified
Journal Article
Closed access
SLS. Gokul Lakshmi
S. Gokul Lakshmi
Bharti MalviBharti Malvi
Bharti Malvi
DRD. S. Rao
D. S. Rao
DDD. K. Das
D. K. Das
MRManish Roy
Manish Roy
A thermal barrier coating (TBC) consisting of platinum-aluminide bond coat and 7wt-% yttria stabilized zirconia (7YSZ) ceramic top coat deposited by electron beam physical vapour deposition (EB-PVD) system cast Ni-base superalloy CM-247LC. The erosion behaviour of the EB-PVD and air plasma sprayed (APS) TBCs are compared. The APS TBC consists of 7YSZ top coat and CoNiCrAlY bond coat on Inconel 738 substrate. Erosion responses of TBCs have been examined as a function of temperature. The erosion rate of EB-PVD TBC was significantly lower than that of APS TBC. Erosion rate of EB-PVD TBC decreased with test temperature. APS TBC exhibits mostly temperature independent erosion rate. The material removal mechanism of EB-PVD TBC was by the formation of parallel cracks in the ceramic layer close to its surface and their subsequent joining. The material is removed by propagation of subsurface cracks along the splat boundaries in case of APS TBC.

19 January 2018 in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
Verified
Journal Article
Closed access
BVBegori Venkatesh
Begori Venkatesh
Bharti MalviBharti Malvi
Bharti Malvi
MRManish Roy
Manish Roy
PSPallab Sarkar
Pallab Sarkar
Degradation of materials due to the impact of solid particle is a major material wastage process. Modifying the surface of materials can be considered to be a potential method of improving the resistance to erosion. In the present days, weld hard-facing is a popular surface modification process. Engineering industries are opting for hard-facing because of its low capital cost, low operational cost, and operational simplicity. In the context of erosion-resistant hard materials, a series of Co-based alloys that can be deposited by hard-facing is one of the most suitable materials. The present analysis has been carried out to evaluate the influence of processing conditions of hard-faced Co-based alloyed layer on solid particle erosion response at ambient temperature. These layers were deposited on mild steel substrate by weld hard-facing. The mechanical properties and microstructural features of these coatings were evaluated by means of X-ray diffraction technique, optical microscopy, scanning electron microscopy, and microhardness tester. Erosion rate was measured using an air jet erosion test rig. The eroded surface morphology and the transverse section of eroded surfaces were viewed using scanning electron microscopy. The results showed that hard-facing improves erosion resistance of the substrate. The erosion responses of most of the coatings were ductile. Material loss from hard-faced coating was by formation of lips followed by their fracture which initiated in the interdendritic regions.

11 August 2022 in Journal of Electrochemical Science and Engineering
Verified
Journal Article
Open access
PDF file
Bharti MalviBharti Malvi
Bharti Malvi
MRManish Roy
Manish Roy
Abradable coatings are essentially sealing materials and are deposited by thermal spray techniques. The main function of these coatings is to control the clearance of the gas path of the gas turbine engines. The abradable coating prevents turbine blade damage by abrading itself when there is an offset or vibration during turbine operation. Since the coating is meant to abrade, the preferred coating material is relatively softer than the turbine blade material. As these coatings are prone to solid particle erosion at high temperatures, the erosion response of these coatings at elevated temperatures needs to be investigated. In order to achieve this objective, MCrAlY boron nitride polymer coating was deposited employing an air plasma spraying technique on a Ni-base alloy substrate. The important features of the microstructure and mechanical properties of the coating were examined, and the coating was subjected to erosion at various temperatures under different erosion conditions. The results indicate a ductile erosion behaviour for an abradable top coat. The erosion rate increases with the temperature of the coating. The detailed results of the investigation are presented, and the erosion mechanisms are studied.

22 November 2024 in Journal of Materials Research and Technology
Verified
Journal Article
Open access
Bharti MalviBharti Malvi
Bharti Malvi
RPRanga Teja Pidathala
Ranga Teja Pidathala
DSDipeshwari J. Shewale
Dipeshwari J. Shewale
PPPramina Kumari Pandey
Pramina Kumari Pandey
NPNishaben Patel
Nishaben Patel
Swaroop ChakrabortySwaroop Chakraborty
Swaroop Chakraborty

14 March 2021 in Journal of Thermal Spray Technology
Verified
Journal Article
Closed access
PDF file
Bharti MalviBharti Malvi
Bharti Malvi
MRManish Roy
Manish Roy

21 July 2025 in Journal of Materials Research and Technology
Verified
Journal Article
Open access
Bharti MalviBharti Malvi
Bharti Malvi
NKNaressh Kumar
Naressh Kumar
CBC. Balasubramanian
C. Balasubramanian
AKAsokan Kandasami
Asokan Kandasami
BSB. Spataro
B. Spataro
Augusto MARCELLIAugusto MARCELLI
Augusto MARCELLI