Branimir Caran

Mr. Branimir Caran

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 July 2024 in Actuators
Verified
Journal Article
Open access
PDF file
BCBranimir Caran
Branimir Caran
VMVladimir Milić
Vladimir Milić
MŠMarko Švaco
Marko Švaco
BJBojan Jerbić
Bojan Jerbić
This paper deals with the synthesis and implementation of a controller for asymptotic tracking of the desired trajectory of a mobile robot. The mobile robot used for the experimental validation has eight motors with an inner control loop. Four steering actuators are controlled using position controllers and four driving actuators are controlled using velocity controllers. A complex robot kinematic model is converted into a control-oriented linear time-varying system, which is then used to design a time-varying control law that minimizes the quadratic optimality criterion. In contrast to conventional methodologies for solving the corresponding Riccati differential equations, a computational approach that explicitly determines the time-varying controller matrix by employing recurrent matrix computations is proposed. Mobile robot control inputs (linear velocity, steering angles and steering velocities) are forwarded to the steering and driving actuators with properly tuned position and velocity controllers using an inverse kinematic model of the mobile robot. The obtained control law is evaluated on an experimental set-up of a real mobile robot system. The controller is implemented using the Robot Operating System.

22 July 2025 in Robotics
Verified
Journal Article
Open access
PDF file
MMMatija Markulin
Matija Markulin
LMLuka Matijević
Luka Matijević
JJJanko Jurdana
Janko Jurdana
LŠLuka Šiktar
Luka Šiktar
BCBranimir Caran
Branimir Caran
MŠMarko Švaco
Marko Švaco
This paper presents the PRONOBIS project, an ultrasound-only, robotically assisted, deep learning-based system for prostate scanning and biopsy treatment planning. The proposed system addresses the challenges of precise prostate segmentation, reconstruction and inter-operator variability by performing fully automated prostate scanning, real-time CNN-transformer-based image processing, 3D prostate reconstruction, and biopsy needle position planning. Fully automated prostate scanning is achieved by using a robotic arm equipped with an ultrasound system. Real-time ultrasound image processing utilizes state-of-the-art deep learning algorithms with intelligent post-processing techniques for precise prostate segmentation. To create a high-quality prostate segmentation dataset, this paper proposes a deep learning-based medical annotation platform, MedAP. For precise segmentation of the entire prostate sweep, DAF3D and MicroSegNet models are evaluated, and additional image post-processing methods are proposed. Three-dimensional visualization and prostate reconstruction are performed by utilizing the segmentation results and robotic positional data, enabling robust, user-friendly biopsy treatment planning. The real-time sweep scanning and segmentation operate at 30 Hz, which enable complete scan in 15 to 20 s, depending on the size of the prostate. The system is evaluated on prostate phantoms by reconstructing the sweep and by performing dimensional analysis, which indicates 92% and 98% volumetric accuracy on the tested phantoms. Three-dimansional prostate reconstruction takes approximately 3 s and enables fast and detailed insight for precise biopsy needle position planning.

17 February 2026 in arXiv
Verified
Preprint
Open access
PDF file
BCBranimir Caran
Branimir Caran
VMVladimir Milić
Vladimir Milić
BJBojan Jerbić
Bojan Jerbić
In this letter, Lyapunov-based synthesis of a PI-like controller is proposed for $\mathcal{L}_2$-stable motion control of an independently driven and steered four-wheel mobile robot. An explicit, structurally verified model is used to enable systematic controller design with stability and performance guarantees suitable for real-time operation. A Lyapunov function is constructed to yield explicit bounds and $\mathcal{L}_2$ stability results, supporting feedback synthesis that reduces configuration dependent effects. The resulting control law maintains a PI-like form suitable for standard embedded implementation while preserving rigorous stability properties. Effectiveness and robustness are demonstrated experimentally on a real four-wheel mobile robot platform.

4 September 2025 in arXiv
Verified
Preprint
Open access
PDF file
BCBranimir Caran
Branimir Caran
VMVladimir Milić
Vladimir Milić
MŠMarko Švaco
Marko Švaco
BJBojan Jerbić
Bojan Jerbić
This paper presents the design of a pose estimator for a four wheel independent steer four wheel independent drive (4WIS4WID) wall climbing mobile robot, based on the fusion of multimodal measurements, including wheel odometry, visual odometry, and an inertial measurement unit (IMU) data using Extended Kalman Filter (EKF) and Unscented Kalman Filter (UKF). The pose estimator is a critical component of wall climbing mobile robots, as their operational environment involves carrying precise measurement equipment and maintenance tools in construction, requiring information about pose on the building at the time of measurement. Due to the complex geometry and material properties of building facades, the use of traditional localization sensors such as laser, ultrasonic, or radar is often infeasible for wall-climbing robots. Moreover, GPS-based localization is generally unreliable in these environments because of signal degradation caused by reinforced concrete and electromagnetic interference. Consequently, robot odometry remains the primary source of velocity and position information, despite being susceptible to drift caused by both systematic and non-systematic errors. The calibrations of the robot's systematic parameters were conducted using nonlinear optimization and Levenberg-Marquardt methods as Newton-Gauss and gradient-based model fitting methods, while Genetic algorithm and Particle swarm were used as stochastic-based methods for kinematic parameter calibration. Performance and results of the calibration methods and pose estimators were validated in detail with experiments on the experimental mobile wall climbing robot.