A drive circuit embedded with a level shifter was fabricated with conventional a-Si:H thin-film transistor (TFT) process. Two cascaded bootstrapped inverters were fabricated for the level shifter. The proposed level shifter shifts an input signal to a high voltage, for example, from 5 to 30 V. The level shifter embedded driver with a-Si:H TFT operates well for the input 5-V start pulse and clocks, and the 4th output of the driver shows 30.3-V output. The level shifter is stable under operation even though there is a threshold voltage shift of a-Si:H TFT. The stability of the driver was also investigated.
This letter proposes a voltage drop by current (IR drop) and threshold voltage compensation pixel circuit, in which the power line is eliminated. The proposed circuit provides a larger fill factor than the conventional one because the circuit does not use a VDD line but instead utilizes the scan line as a power line. The proposed pixel circuit was verified using both circuit analysis and circuit simulations. The proposed circuit could increase the aperture ratio and compensate for the IR drop and threshold voltage variations in active matrix organic light-emitting diode devices, where I and R are current and resistance of the supply power lines. Using the proposed pixel circuit, a large fill factor with both IR drop and threshold voltage compensation was achieved.
A vertical oxide thin-film transistor was developed with interfacial oxidation for low voltage operation. The gate metal was used as a spacer for the definition of the transistor’s channel as well as the gate electrode. After definition of the vertical side wall, an IGZO (In-Ga-Zn Oxide) layer was deposited, followed by the interfacial oxidation to form a thin gate insulator. Ta was used for the gate material due to the low Gibbs free energy and high dielectric constant of tantalum oxide. A 15 nm tantalum oxide layer was obtained by the interfacial oxidation of Ta at 400 °C under oxygen atmosphere. The thin gate oxide made it possible to operate the transistor under 1 V. The low operation voltage enables low power consumption, which is essential for mobile application.
1 May 2005 in SID Symposium Digest of Technical Papers