The objective of this study was to evaluate operators’ posture and repetitive motions in the mechanized wood harvesting operations, aiming comfort, safety, and health of forest operators. The study was carried out in the clearcutting of pine stands located in Paraná State, Brazil. Data were obtained in tree cutting operations with feller buncher and wood processing with harvesters, in which three operators in each machine were filmed during their workday. The typical postures were evaluated by Rapid Whole-Body Assessment (REBA) and Rapid Upper-Limb Assessment (RULA) methods, while repetitive motions were evaluated by Latko, Silverstein and Strain Index (SI) methods. The results showed the feller buncher operators remained long period seated in static position, with fists turning outside the neutral line and without pauses for recovery, although REBA and RULA methods had identified low postural risk. In wood processing operation, the spinal column and neck were the most affected body parts, presenting medium postural risk and the need for investigations and quickly changes by REBA and RULA methods, respectively. Besides that, wood harvesting operations with feller buncher and harvester were classified as high repeatability, showing more than 30 thousand repetitive motions in a workday, indicating high risk of Repetitive Strain Injuries (RSIs) and Musculoskeletal Disorders (MSDs) in the operators. Therefore, it is concluded the ergonomic measures are necessary to improve operators’ comfort and health.
Este trabalho avaliou a compactação do solo submetido ao tráfego do harvester e do forwarder na colheita de madeira em povoamentos de Pinus taeda L. Os dados foram coletados em uma empresa florestal localizada no município de Campo do Tenente, estado do Paraná. A avaliação da compactação foi feita por meio dos parâmetros físicos densidade do solo, porosidade total, porosidade de aeração e resistência do solo à penetração em três níveis de profundidades: 0 a 15 cm, 15 a 30 cm e 30 a 50 cm. Os dados foram submetidos à análise de variância e as médias comparadas pelo teste de Tukey ao nível de 95% de probabilidade. O tráfego das máquinas provocou uma maior compactação nas camadas superficiais do solo, sendo que após o tráfego do forwarder houve um aumento no incremento da resistência do solo à penetração, em relação à testemunha, da ordem de 151,4%, com valor médio de 1,76 Mpa. Não houve diferença estatística significativa nas propriedades do solo devido ao tráfego das máquinas de colheita no sistema de toras curtas.
8 April 2020 in Croatian journal of forest engineering
Demand for higher value-added wood products stimulates research for new, mainly mechanized, thinning operations in order to increase productivity and reduce production costs. In this context, the aim of this study was to evaluate the impact of distance between strip roads on forwarder productivity and costs of thinning operations in Pinus taeda stands. The study was carried out in 10-year-old Pinus taeda stands located in Parana State, Brazil. Two thinning methods were evaluated: (1) TH5: systematic harvest in every fifth tree row and selective harvest in adjacent rows; and (2) TH7: systematic harvest in every seventh tree row and selective harvest in adjacent rows. Working cycle times, productivity and costs were determined through a time-motion study of the forwarder. The additional variables evaluated were wood assortments (industrial wood and energy wood) and extraction distances (50, 100, 150 and 200 m), and mean values were compared between thinning methods using t tests for independent samples (α=0.05). Loading and unloading elements consumed the most time in the working cycle, with lower participation time in TH7 due to greater availability of logs along the strip roads (higher pile volumes), influencing total cycle time up to the mean distance of 150 m for both assortments. TH7 consequently showed 6% higher productivity, its energy yield was 5.3% lower and its production cost was 3.0% lower.
Nesta pesquisa, objetivou-se realizar uma avaliação da carga de trabalho físico e biomecânica de trabalhadores nas atividades de roçada manual e semimecanizada para a implantação de plantios florestais. A carga de trabalho físico foi avaliada por meio do levantamento da frequência cardíaca dos trabalhadores nas diversas fases do ciclo de trabalho, com uso de um monitor Polar Oy. A avaliação biomecânica foi realizada por meio de filmagens dos trabalhadores no trabalho, sendo definidas as posturas típicas e os dados analisados no programa 3DSSPP (Programa de Predição de Postura e de Força Estática), desenvolvido pela Universidade de Michigan, EUA. Os resultados mostraram que, a atividade de roçada manual requereu maior esforço físico, com carga cardiovascular acima do limite máximo recomendado de 40%, sendo a atividade classificada como pesada. Nesse método de trabalho, várias articulações dos trabalhadores apresentaram riscos de lesões, sendo o quadril a articulação mais comprometida, com percentual de capazes variando entre 88 e 92%.
The increased demand for several forest products makes it necessary to apply different management regimes in forest stands, which may influence the wood harvesting operations. This study aimed to evaluate the effect of average individual tree volumes obtained through different management regimes on harvester productivity and costs, thereby enabling to generate information for forest managers. The study was carried out in three Pinus taeda L. stands under clear cutting with different average individual tree volumes (AIV): I (0.367 m3); II (0.582 m3); and III (0.766 m3). Working cycle times, productivity per productive machine hour, energy yield and production costs were obtained by a time and motion study, in which the average values obtained were compared by the Tukey-Kramer test (α ≤ 0.05). The work elements of the harvester’s work cycles were affected by forest management regimes, mainly the movement and the processing, with significant statistical difference between stands, but no difference between total working cycle times. The management regime applied to forest stands influenced the spacing and whole trunk volume which consequently increased the average productivity of the machine from 36.8 to 74.1 m³ per productive machine hour in treatments I and III, respectively, and reduced production costs by 50%. The forest management regimes influenced the clear-cutting operation with harvester.
The need to obtain multi-products from the forest makes the wood processing an important step in the timber harvest, being necessary, then, to understand the influence of the stand characteristics on the operational performance of the machines. The aim of this study was to evaluate the effect of the individual tree volume on the operational performance of the harvester forest processor in Pinus taeda L. stands, in order to assist in planning operations and reducing production costs. The analyzes were carried out by means of a time and motion study, determining the time consumed in the phases of the operational cycle, mechanical availability, operational efficiency, productivity, and production costs in three stands with different individual mean volumes (IMV): I (1.21 m3 tree-1); II (1.34 m3 tree-1) and III (1.61 m3 tree-1). In a completely randomized design, the averages of the variables were compared, as well as models for estimating productivity and production costs were fitted according to individual tree volume. The results showed that the processing element consumed a significant part of the total operational cycle time, with 46, 53 and 64% in treatments I, II and III, respectively, with an average operational efficiency of 56% in all treatments. Productivity increase and reduction of production costs were observed in the order of 43 and 30%, respectively, with the increase in IMV from 1.21 to 1.61 m3 tree-1. Such behavior can be represented by the third degree polynomial, which demonstrated the operational limit of 1.5 m3 tree-1 for the harvester forest processor.