The aim of this article is to develop a novel distributed direct power sliding-mode control for an islanded AC microgrid. This solution replaces the droop mechanism of each inverter with two separate sliding surfaces working as primary/secondary controllers. The design of these surfaces is based on the dynamic model of the active and reactive powers to enhance the robustness against line impedance mismatches. Moreover, a theoretical stability analysis is presented. The main features of this proposed control are to regulate the voltage and frequency achieving an accurate active and reactive power sharing, achieve stability under a wide range of line impedances, and provide robustness toward external disturbances, including communication failures. Finally, the experimental results verify the controller performance, the stability with different line impedances, and the robustness against communication partitions.
24 August 2021 in IEEE Transactions on Power Electronics
In this article, a novel cascade model-predictive control for a three-phase unity power factor rectifier is presented. Unlike the traditional control techniques for rectifiers, the proposed method uses a cascade dual-model-predictive control for the inner and outer control loops. The three-phase currents of the rectifier are controlled with the inner control loop, while the desired output voltage is achieved with the outer control loop. In this proposal, the output power is used as a feedforward to enhance the transient dynamics of the output dc voltage. Several advantages can be highlighted such as a fixed switching frequency, and output voltage variations are avoided when a sudden change in the load or a voltage sag appears. The overall control proposal has been fully integrated into a digital signal processor. Selected experimental results are introduced to validate the theoretical contributions of this article.
21 July 2021 in IEEE Transactions on Industrial Electronics
Small-signal models are mostly used to model and design inverter-dominated microgrids. Conversely, this article proposes a large-signal model for grid-forming inverters connected to a microgrid based on the active and reactive power dynamic equations. In this work, it is proposed to use this nonlinear model to develop a constrained predictive control for the inverters connected to a microgrid. The main features of this proposed control are follows: first, direct voltage control (in amplitude and frequency) is not necessary; second, stability is guaranteed under a wide range of line impedances (hence, the virtual impedance is not needed); third, the proposed control can operate with unbalanced and nonlinear loads. Moreover, a theoretical stability analysis is presented. Selected experimental results show that the proposed control operates satisfactorily in case of a load step change, a load imbalance, and nonlinear loads.
Zero-emission transportation is currently a public priority, especially in big cities. For this reason, the use of electric vehicles (EVs) is receiving much attention. To facilitate the adoption of EVs, a proper charging infrastructure together with energy management is essential. This article proposes a design guideline for a direct current (DC) charging station with bipolar properties. A bipolar system can convert a two-wire system into three wires in a microgrid system with a neutral line. The configuration of the bipolar system supports different loads; therefore, the unbalanced operation is inherent to the system. The proposed bipolar DC charging station (CS) has a three-level balancing converter that reduces the step-down effort chargers. Moreover, this paper proposes the continuous-control-set model predictive control (CCS-MPC)-based balancing strategy that allows the handling of different output loads while keeping the neutral-line voltage efficiently regulated with improved dynamic performance compared to a traditional controller. Stability and parameter robustness analyses are also performed for the control parameter selection. To ensure the performance of the proposed method, both simulation and experimental results are presented and compared with those obtained from the traditional methods.
10 July 2024 in IEEE Transactions on Industry Applications
The increase in greenhouse gas emissions (GHG) from the transportation sector, along with the ongoing depletion of fossil fuels, emphasizes the necessity for increased focus on energy storage systems (ESSs) and renewable energy sources (RESs) in seaports and on short-distance vessels such as ferries. This paper investigates the development of next-generation smart ports, wherein the integration of Internet of Things (IoT) and sensors transforms ports into intelligent hubs. This transformation aims to optimize operations for all stakeholders, that leverage emerging technologies to enhance efficiency and connectivity. Notably, many smaller seaports lack shore-power facilities, shore-based power installations that supply electric power to ships from the grid. Consequently, ships often rely on continuous operation of auxiliary diesel engines and generators while at berth to meet auxiliary loads. To address these challenges and overcome economic and logistical constraints, this paper proposes a seaport microgrid (SMG) with a DC distribution that would be created by integrating multiple ships with decentralized control mechanisms supplemented by an onshore charging infrastructure. This helps to achieve a sustainable path by introducing ship-based SMGs involving the integration of shipboard microgrids with onshore charging. The proposed approach relies on adaptive droop control, decentralized power-sharing based on battery charge and reducing traditional communication dependencies. The case study supported by the simulation results shown in the paper emphasizes the potential of this strategy in the evolution of maritime infrastructure.
7 June 2022 in IEEE Transactions on Industrial Electronics
In islanded ac microgrids, when multiple voltage source inverters (VSIs) operate in parallel, it is challenging to simultaneously obtain both accurate complex (active and reactive) power sharing and voltage regulation (in terms of frequency and amplitude). State-of-the-art strategies that target these two objectives often rely on hierarchical primary droop plus communication-based secondary controls and adaptive virtual impedance methods. However, control dynamics and/or accuracy are still affected by inverters line impedances mismatches. To overcome these limitations, this article presents for balanced ac microgrids a distributed control strategy that simultaneously guarantees both voltage regulation and accurate power sharing. The distributed strategy is based on having at each VSI a single controller that merges two control loops that can be designed in isolation, thus decoupling the design of the power sharing control from the design of the voltage control. The cooperative operation of all VSI controllers, which requires exchanging control data over a communication network, ensures meeting both control objectives with the independence of the line impedance mismatches or the connection and disconnection of inverters and loads. And these properties are achieved without changing the controller structure and (easy-to-tune) parameters nor increasing the control effort. Experimental results corroborate the control proposal.