Bertrand Cassoret

Dr. Bertrand Cassoret

Artois University, Arras, Hauts-de-France, France
+1

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 February 2019 in IET Electric Power Applications
Verified
Journal Article
Open access
PDF file
BCBertrand Cassoret
Bertrand Cassoret
JMJean‐Paul Manata
Jean‐Paul Manata
VMVincent Mallard
Vincent Mallard
DRDaniel Roger
Daniel Roger
This paper deals with Life Cycle Assessment (LCA) of induction machines and try to determine whether a copper‐cage rotor is better than an aluminium‐cage one, for a given using time and considering the global environmental footprint. The paper focuses on induction motors directly connected to the power grid, without electronic converters. The LCA takes into account the materials extraction, the machine construction, the use and the end of life for several criteria. In the first part, a copper conductor is compared to an aluminium one and results are discussed considering the part of recycled material in the rotor manufacturing process. In a second part, two machines with the same efficiency are compared. The environmental impacts differences are discussed. In the third part, two machines of the same sizes, but with a different rotor, are compared considering various usage times. The lower losses of the copper‐rotor machine yield a significant advantage for the efficiency but the gains are smaller when the global life cycle is considered.

3 May 2022 in International Journal of Green Energy
Verified
Journal Article
Closed access
BCBertrand Cassoret
Bertrand Cassoret
FBFrançois Balavoine
François Balavoine
DRDaniel Roger
Daniel Roger
The environmental impacts of four French scenarios of electricity production systems are compared. They propose a variable part of nuclear which is essentially replaced by wind and solar energy. The paper proposes a comparison of these scenarios based on a Life Cycle Assessments. The systems with a large part of intermittent wind and solar sources need a higher installed power. In addition, for the same installed power, renewable energies require more building materials than nuclear ones. Therefore, the environmental impacts of infrastructures increase with the part of renewable energy. During the use phase, the environmental impacts of fossil fuels, especially coal, are significant. Consequently, the best systems must use the least fossil fuels and need the lower installed power. Finally, if we exclude the risk of nuclear disaster and if we consider that nuclear wastes are well managed, the electricity production systems that achieve the lowest environmental impacts, with the same availability for the electricity to end users, are those that have a large part of nuclear power.

2 April 2022 in Sensors
Verified
Journal Article
Open access
PDF file
SNSijie NI
Sijie NI
GBGrégory Bauw
Grégory Bauw
RRRaphael ROMARY
Raphael ROMARY
BCBertrand Cassoret
Bertrand Cassoret
JBJean Le Besnerais
Jean Le Besnerais
In this paper, a passive method for the noise reduction of the PMSM (Permanent Magnet Synchronous Machine) is presented. The principle is to add an auxiliary three-phase winding into the same slots as the initial stator winding, short-circuited via three capacitors of suitable values. The aim is to create a damping effect for flux density harmonic components, especially high-frequency harmonics from the PWM (PulseWidth Modulation), in the air gap in order to reduce the noise and vibration of the PMSM. The method can significantly reduce the global sound pressure level and vibrations for specific frequencies. Because of passive features, the additional winding effectively mitigates magnetic noise without greatly increasing the complexity of design and manufacturing, which also extends its applicability to different PMSMs.

10 August 2020 in International Journal of Applied Electromagnetics and Mechanics
Verified
Journal Article
Closed access
FZFarid Zidat
Farid Zidat
DMDiana Mavrudieva
Diana Mavrudieva
PLPatrick Lombard
Patrick Lombard
GBGrégory Bauw
Grégory Bauw
BCBertrand Cassoret
Bertrand Cassoret
JLJean-Philippe Lecointe
Jean-Philippe Lecointe

17 January 2024 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
SNSijie NI
Sijie NI
GBGrégory Bauw
Grégory Bauw
BCBertrand Cassoret
Bertrand Cassoret
RRRaphael ROMARY
Raphael ROMARY
JBJean Le Besnerais
Jean Le Besnerais
This article investigates noise and vibrations of a permanent magnet synchronous machine (PMSM) integrated with a damper system under different load conditions. The damper system consisting of a three-phase auxiliary winding and external capacitors is designed to reduce electromagnetic noise and vibrations in Permanent Magnet Synchronous Machines (PMSMs). Capacitors are used to short-circuit a three-phase damper winding that is wound into the same slots as the stator winding. The effectiveness of the damper system in reducing noise and vibration is analyzed, and its impact is practically studied in this article. First, electromagnetic excitation due to pulsewidth modulation (PWM) supplies and corresponding noise and vibrations in PMSMs are presented. Then, the principle and installation of the damper system are explained in detail. The sideband harmonic reduction effect in a studied machine is predicted by numerical simulations. To verify the performance of the damper system to reduce noise and vibration and its impact under various operating conditions, experimental validation is performed on a load test bench. Overall, the damper system can effectively reduce electromagnetic noise and vibrations, but it needs to explore suitable operating conditions to minimize its negative effects.

1 January 2015
Verified
Book Chapter
Closed access
BCBertrand Cassoret
Bertrand Cassoret
DRDaniel Roger
Daniel Roger
La consommation d’énergie a commencé à croitre beaucoup au XIXe siècle avec l’exploitation du charbon, elle s’est considérablement amplifiée au XXe siècle avec le pétrole et le gaz. Cette manne d’énergie concentrée, stable et facile à utiliser, mise gratuitement à disposition par la nature, est le résultat de millions d’années de stockage du CO2 par la photosynthèse et la décomposition de matière organique. L’abondance énergétique apportée par le charbon, le gaz et le pétrole a permis une véritable métamorphose des pays riches et du mode de vie des habitants. Le développement économique et sociétal, lié à la consommation d’énergie, a fait passer l’espérance de vie en France de 35 ans au début du XIXe siècle à plus de 80 ans aujourd’hui. Paradoxalement cette consommation d’énergie fossile est synonyme de pollutions diverses néfastes à la santé et d’émissions de CO2 qui amplifie le réchauffement climatique. Après avoir rappelé quelques données sur le passé et le présent de ...