A linear combination of traditional discharge equations for simple rectangular and/or triangular weirs is proposed to describe the discharge equations of compound broad-crested (CBC) weirs. The CBC weirs are composed of rectangular, triangular, and/or truncated triangular weirs. Dimensionless discharge equations have been also derived. Laboratory experiments on discharge relations for flows over four CBC weirs were conducted in this study in order to calibrate the proposed discharge equations. The experiments were carried out under the conditions of the H1 ∕ H2 -ratio of water heads above upper and lower crests less than 0.54, and a dimensionless discharge less than 2.174. The result shows that the differences between the calculated discharges by the proposed equations and the measured ones are less than 3% for flows over these CBC weirs under the present experimental conditions.

Hydraulic jumps in an inclined rectangular chute contraction were studied in this paper. Theoretical equations for the sequent-area and sequent-depth ratios for hydraulic jumps in the contraction were developed considering the effects of contracting width and sloping bottom. The equation of the sequent-area ratio (instead of the sequent-depth ratio) has the same form as the traditional Belanger equation for the sequent-depth ratio for hydraulic jumps in a horizontal rectangular constant-width channel (HRCW channel). A modified approach Froude number M , including the effects of contracting width and sloping bottom, was introduced to replace the approach Froude number F1 in analyzing hydraulic jumps in the contraction. Laboratory experiments of hydraulic jumps in inclined contractions were also conducted to verify the theoretical sequent-area ratio and also to develop the empirical equations of the location of the start of the jump, flow depth of the start of the jump, length of the jump, and energy loss o...