This study presents a synergistic approach to the study of the aerosol optical and microphysical properties measured in La Palma, Spain, during the 2021 eruption of the Cumbre Vieja volcano (from 19 September to 13 December 2021). This study aims to characterize the different phases of the volcanic eruption using the spatio-temporal evolution of the event together with the mass concentration quantification of four different atmospheric layers. The impact of the plume’s pathway that reached the South of France is analyzed. Here, passive and active remote sensors were used, namely CL51 and CL61 ceilometers and AERONET sunphotometers. The attenuated backscattering ranged from 0.8 to 9.1 × 10${}^{-6}$ (msr)${}^{-1}$ and the volume depolarization ratio measured nearby the volcano was up to 0.3. The ash plume remained within the first 4 km agl, with intense episodes that reached mean aerosol optical depth values of up to 0.4. Thirteen study cases were selected where coarse mode was dominant over fine mode. For the data selection, the fine and coarse lidar ratios found were 3.9 ± 0.8 and 21.0 ± 3.8 sr in the north and 6.9 ± 1.8 and 30.1 ± 10.3 sr in the south. The ash mass concentration reached moderate levels with maximum values of up to 313.7 $\mathsf{\mu }$gm${}^{-3}$.

We examine the capability of near-spherical-shaped particles to reproduce the triple-wavelength particle linear depolarization ratio (PLDR) and lidar ratio (LR) values measured over Europe for stratospheric smoke originating from Canadian wildfires. The smoke layers were detected both in the troposphere and the stratosphere, though in the latter case the particles presented PLDR values of almost 18 % at 532 nm as well as a strong spectral dependence from the UV to the near-IR wavelength. Although recent simulation studies of rather complicated smoke particle morphologies have shown that heavily coated smoke aggregates can produce large PLDR, herein we propose a much simpler model of compact near-spherical smoke particles. This assumption allows for the reproduction of the observed intensive optical properties of stratospheric smoke, as well as their spectral dependence. We further examine whether an extension of the current Aerosol Robotic Network (AERONET) scattering model to include the near-spherical shapes could be of benefit to the AERONET retrieval for stratospheric smoke cases associated with enhanced PLDR. Results of our study illustrate the fact that triple-wavelength PLDR and LR lidar measurements can provide us with additional insight when it comes to particle characterization.

Black carbon aerosol emissions are recognized as contributors to global warming and air pollution. There remains, however, a lack of techniques to remotely measure black carbon aerosol particles with high range and time resolution. This article presents a direct and contact-free remote technique to estimate the black carbon aerosol number and mass concentration at a few meters from the emission source. This is done using the Colibri instrument based on a novel technique, referred to here as Picosecond Short-Range Elastic Backscatter Lidar (PSR-EBL). To address the complexity of retrieving lidar products at short measurement ranges, we apply a forward inversion method featuring radiometric lidar calibration. Our method is based on an extension of a well-established light-scattering model, the Rayleigh–Debye–Gans for Fractal-Aggregates (RDG-FA) theory, which computes an analytical expression of lidar parameters. These parameters are the backscattering cross-sections and the lidar ratio for black carbon fractal aggregates. Using a small-scale Jet A-1 kerosene pool fire, we demonstrate the ability of the technique to quantify the aerosol number and mass concentration with centimetre range-resolution and millisecond time-resolution.

A bi-static short-range elastic backscatter micro-lidar, named Colibri, has been developed for quantitative aerosol profiling with high range and temporal resolution within the first hundred meters. The geometric (i.e., overlap) and radiometric (i.e., lidar constant) calibrations were performed along with dark current and background noise characterizations. Results of a measurement campaign have demonstrated the capability of our system to characterize aerosol plumes with high range-resolution (<10 cm) in the short-range close to their emission sources (from 10 m). To this aim, fog-oil aerosol plumes were generated in a tunnel and characterized by using an optical particle counter. A forward inverse method without boundary conditions is presented for inverting short-range lidar profiles when no reference molecular zone is available. Lastly, we report the different retrieved lidar products, namely the distribution of aerosol layers, radiative properties (i.e., backscatter profiles), and the microphysical properties (i.e., number concentration profiles). For the validation of the proposed methodology, the lidar products were compared with measurements from the optical particle counter. Lastly, the impact of calibration errors on the lidar products is discussed through an uncertainty analysis.

A non-invasive optical technique, based on a supercontinuum laser source and hyperspectral sensors, is established to measure the spectral degree of linear polarization (DOLP) in a broad spectral range from 525 nm to 1000 nm. Several biomaterials of interest, such as healthy and cancerous skins, are considered. The spectral DOLP of melanoma, from 5 mm to 9 mm diameter, are measured and analyzed. An increase of the spectral DOLP is reported for 100% of the melanoma samples compared to healthy skin samples. The spectral DOLP of a given melanoma appears to be correlated to the stage of its development: the larger the melanoma, the higher the DOLP. Such trend could be explained by a decrease of the surface roughness along the evolution of the disease. In addition, a significant spectral dependence of the DOLP is reported for melanoma samples as it exhibits a decrease in the near infrared from 750 nm to 1000 nm.