Aside from being known for its excellent mechanical properties and aesthetic effect, zirconia has recently attracted attention as a new dental implant material. Many studies have focused on hydroxyapatite (HA) coating for obtaining improved biocompatibility, however the coating stability was reduced by a byproduct produced during the high-temperature sintering process. In this study, to overcome this problem, we simply coated the zirconia surface with a sol–gel-derived hydroxyapatite (HA) layer and then sintered it at a varied temperature (40 MPa) was also appropriate as a dental implant application. In addition, in vitro cell experiments using a preosteoblast cell line revealed that the HA-coated zirconia surface acts as a preferable surface for cell attachment and proliferation than bare zirconia surface. In vivo animal experiments also demonstrated that the osteoconductivity of zirconia were dramatically enhanced by HA coating, which was comparable to that of Ti implant. These results suggest that the sol–gel-based HA-coated zirconia has a great potential for use as a dental implant material.
As a metallic biomaterial, titanium (Ti) exhibits excellent biocompatibility, but its osteoinductivity is limited. Therefore, to improve this property, an electrophoretic deposition (EPD) technique was used to coat the Ti surface with Ti3C2 MXene (Ti3C2), a new class of two-dimensional nanomaterial. Ti3C2 is known to have good biocompatibility and better osteoinductivity than graphene oxide. The coating layer was characterized by a particulate microstructure and exhibited X-ray diffraction and Raman spectroscopy peaks corresponding to the Ti3C2 phase. In vitro cell tests using human mesenchymal stem cells confirmed that the cell attachment and proliferation on Ti3C2-coated Ti were similar to that of bare Ti, and that the osteoinductivity was significantly enhanced compared with bare Ti.
Current collectors are key components of lithium-ion batteries, providing conductive pathways and maintaining interfacial stability with the electrode materials. Conventional metal-based current collectors, such as aluminum and copper, exhibit excellent conductivity and mechanical strength. However, they have considerable limitations, including electrochemical corrosion, interfacial resistance caused by the formation of passive layers, and mechanical degradation due to repeated cycling. To overcome these challenges, various carbon-based coatings, including amorphous carbon, graphene, and carbon nanotubes, have been developed. These coatings enhance the current collector performance by improving the collector conductivity, chemical stability, and interfacial adhesion. Vertically aligned graphene-like structures known as carbon nanowalls (CNWs) have garnered attention owing to their unique architecture, resulting in high surface area, exceptional conductivity, and excellent thermal and mechanical properties. In this mini-review, the recent advancements in carbon-based coating technologies and their role in enhancing the performance of current collectors were summarized, focusing on the innovative applications of CNWs in next-generation energy storage systems.