Andrei Chernil'nik

Mr. Andrei Chernil'nik

Don State Technical Univercity
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 October 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Alexey BeskopylnyAlexey Beskopylny
Alexey Beskopylny
Sergey A. Stel'makhSergey A. Stel'makh
Sergey A. Stel'makh
Evgenii M. Shcherban'Evgenii M. Shcherban'
Evgenii M. Shcherban'
LMLevon R. Mailyan
Levon R. Mailyan
Besarion MeskhiBesarion Meskhi
Besarion Meskhi
NBNikita Beskopylny
Nikita Beskopylny
Currently, one of the topical areas of application of machine learning methods in the construction industry is the prediction of the mechanical properties of various building materials. In the future, algorithms with elements of artificial intelligence form the basis of systems for predicting the operational properties of products, structures, buildings and facilities, depending on the characteristics of the initial components and process parameters. Concrete production can be improved using artificial intelligence methods, in particular, the development, training and application of special algorithms to determine the characteristics of the resulting concrete. The aim of the study was to develop and compare three machine learning algorithms based on CatBoost gradient boosting, k-nearest neighbors and support vector regression to predict the compressive strength of concrete using our accumulated empirical database, and ultimately to improve the production processes in construction industry. It has been established that artificial intelligence methods can be applied to determine the compressive strength of self-compacting concrete. Of the three machine learning algorithms, the smallest errors and the highest coefficient of determination were observed in the KNN algorithm: MAE was 1.97; MSE, 6.85; RMSE, 2.62; MAPE, 6.15; and the coefficient of determination R2, 0.99. The developed models showed an average absolute percentage error in the range 6.15−7.89% and can be successfully implemented in the production process and quality control of building materials, since they do not require serious computing resources.

18 November 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Evgenii M. Shcherban'Evgenii M. Shcherban'
Evgenii M. Shcherban'
Sergey A. Stel'makhSergey A. Stel'makh
Sergey A. Stel'makh
Alexey BeskopylnyAlexey Beskopylny
Alexey Beskopylny
LMLevon R. Mailyan
Levon R. Mailyan
Besarion MeskhiBesarion Meskhi
Besarion Meskhi
Ceyhun AksoyluCeyhun Aksoylu
Ceyhun Aksoylu
According to the sustainable development concept, it is necessary to solve the issue of replacing fiber from synthetic materials with natural, environmentally friendly, and cheap-to-manufacture renewable resources and agricultural waste. Concrete is the primary material for which fibers are intended. Therefore, the use of vegetable waste in concrete is an essential and urgent task. Coconut fiber has attracted attention in this matter, which is a by-product of the processing of coconuts and makes it relevant. This work aims to investigate the experimental base for the strength properties of dispersed fiber-reinforced concrete with coconut fibers, as well as the influence of the fiber percentage on the mechanical, physical, and deformation characteristics. The samples were made of concrete with a compressive strength at 28 days from 40 to 50 MPa. The main mechanical characteristics such as strength in compression (cubic and prismatic) and tension (axial and bending), as well as the material’s compressive and tensile strains, were investigated. The percentage of reinforcement with coconut fibers was taken in the range of 0% to 2.5% with an increment of 0.25 wt.%. Tests were carried out 28 days after the manufacture. The microstructure of the resulting compositions was investigating using the electron microscopy method. The most rational percentage of coconut fibers was obtained at 1.75%. The increase in mechanical indicators was 24% and 26% for compression and axial compression, respectively, and 42% and 43% for tensile bending and axial tension, respectively. The ultimate strains in compression were raised by 46% and in tension by 51%. The elastic modulus was increased by 16%.

18 October 2022 in Polymers
Verified
Journal Article
Open access
PDF file
Besarion MeskhiBesarion Meskhi
Besarion Meskhi
Alexey BeskopylnyAlexey Beskopylny
Alexey Beskopylny
Sergey A. Stel'makhSergey A. Stel'makh
Sergey A. Stel'makh
Evgenii M. Shcherban'Evgenii M. Shcherban'
Evgenii M. Shcherban'
LMLevon R. Mailyan
Levon R. Mailyan
DEDiana Elshaeva
Diana Elshaeva
Some of the primary problems of construction are brittleness and low the mechanical properties of good thermal insulation materials. Heat-insulating foam concrete has a low thermal conductivity. However, it is practically impossible to transport it over long distances since corners are cracked during transportation, the structure is broken, and, in principle, the fragility of this material is a big problem for modern buildings. The purpose of this study was to develop a heat-insulating foam concrete with improved characteristics by experimentally selecting the optimal dosage of polypropylene fiber and a nanomodifying microsilica additive. Standard methods for determining the characteristics of fiber foam concrete were used as well as the method of optical microscopy to study the structure of the composite. It has been established that the use of polypropylene fiber with the optimal reinforcement range from 1% to 3% allows us to achieve an improvement in the mechanical and physical characteristics of fiber foam concrete. The optimal dosage of the nanomodifier introduced instead of a part of the binder (10%) and polypropylene fiber (2%) by weight of the binder was determined. The maximum values of increments in mechanical characteristics were 44% for compressive strength and 73% for tensile strength in bending. The values of the thermal conductivity coefficient at optimal dosages of the nanomodifier and fiber decreased by 9%. The absence of microcracking at the phase boundary between the polypropylene fiber and the hardened cement–sand matrix due to nanomodification was noted.

20 February 2023 in Materials
Verified
Journal Article
Open access
PDF file
Alexey BeskopylnyAlexey Beskopylny
Alexey Beskopylny
Sergey A. Stel'makhSergey A. Stel'makh
Sergey A. Stel'makh
Evgenii M. Shcherban'Evgenii M. Shcherban'
Evgenii M. Shcherban'
LMLevon R. Mailyan
Levon R. Mailyan
Besarion MeskhiBesarion Meskhi
Besarion Meskhi
DEDiana Elshaeva
Diana Elshaeva
The partial replacement of the mineral components of concrete with natural renewable analogues in full possession of the performance characteristics of the final material, allows not only the concrete-production process to be made more environmentally friendly and inexpensive, but also to solve an important task for the agricultural industry, which is that associated with waste disposal. The scientific novelty of the work is in the obtaining of new concrete compositions by the partial replacement of coarse aggregate with a natural analogue in the form of a walnut shell, which has the maximum ratio of the strength of the composite to its density, as well as in identifying new dependencies of strength and density and their ratio on the amount of replacement of mineral coarse-aggregate walnut shell. The main goal of this article was to analyze the effect of composition factors on characteristics of concrete with partial replacement of large aggregates with walnut shells and to search for the optimal compound that would make it possible to obtain concrete with a minimum decrease in strength characteristics with a maximum decrease in concrete density. Cubes and prism laboratory samples were made from concrete of normal density with the replacement of coarse aggregate by 5, 10, 15, 20, 25 and 30%, by volume. The main mechanical properties, such as density, strength (compressive, tensile, tensile strength in bending) of the concrete samples were studied. The investigation used standard methods and scanning electron microscopy. An increase into strength characteristics up to 3.5%, as well as the maximum ratio of strength to density of concrete, was observed at a walnut-shell dosage of 5%. Effective partial replacement of coarse aggregate with walnut shells leads to a reduction in the consumption of crushed stone by up to 10% and a decrease in the mass of concrete by up to 6%.

1 February 2024 in Buildings
Verified
Journal Article
Open access
PDF file
Alexey BeskopylnyAlexey Beskopylny
Alexey Beskopylny
Sergey A. Stel'makhSergey A. Stel'makh
Sergey A. Stel'makh
Evgenii M. Shcherban'Evgenii M. Shcherban'
Evgenii M. Shcherban'
LMLevon R. Mailyan
Levon R. Mailyan
Besarion MeskhiBesarion Meskhi
Besarion Meskhi
NBNikita Beskopylny
Nikita Beskopylny
The determination of mechanical properties for different building materials is a highly relevant and practical field of application for machine learning (ML) techniques within the construction sector. When working with vibrocentrifuged concrete products and structures, it is crucial to consider factors related to the impact of aggressive environments. Artificial intelligence methods can enhance the prediction of vibrocentrifuged concrete properties through the use of specialized machine learning algorithms for materials’ strength determination. The aim of this article is to establish and evaluate machine learning algorithms, specifically Linear Regression (LR), Support Vector Regression (SVR), Random Forest (RF), CatBoost (CB), for the prediction of compressive strength in vibrocentrifuged concrete under diverse aggressive operational conditions. This is achieved by utilizing a comprehensive database of experimental values obtained in laboratory settings. The following metrics were used to analyze the accuracy of the constructed regression models: Mean Absolute Error (MAE), Mean Squared Error (MSE), Root-Mean-Square Error (RMSE), Mean Absolute Percentage Error (MAPE) and coefficient of determination (R2). The average MAPE in the range from 2% (RF, CB) to 7% (LR, SVR) allowed us to draw conclusions about the possibility of using “smart” algorithms in the development of compositions and quality control of vibrocentrifuged concrete, which ultimately entails the improvement and acceleration of the construction and building materials manufacture. The best model, CatBoost, showed MAE = 0.89, MSE = 4.37, RMSE = 2.09, MAPE = 2% and R2 = 0.94.

10 September 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Alexey BeskopylnyAlexey Beskopylny
Alexey Beskopylny
Sergey A. Stel'makhSergey A. Stel'makh
Sergey A. Stel'makh
Evgenii M. Shcherban'Evgenii M. Shcherban'
Evgenii M. Shcherban'
LMLevon R. Mailyan
Levon R. Mailyan
Besarion MeskhiBesarion Meskhi
Besarion Meskhi
Andrei Chernil'nikAndrei Chernil'nik
Andrei Chernil'nik
The fibers used in concrete are mainly materials that require additional production, which negatively affects their cost and environmental friendliness. Therefore, the issue of the effectiveness of the use of natural fibers, the extraction of which does not require mechanized production, becomes relevant. One of these materials is sisal fiber. The main purpose of this work was to study the effect of adding sisal fibers on the structure and properties of environmentally friendly concretes with improved characteristics. The tests were carried out in strict accordance with technological recommendations and normative and technical documents. Laboratory samples were made in the form of cubes and prisms of concrete with a compressive strength of 48 MPa and sisal fiber content of 0.25%, 0.5%, 0.75%, 1.0%, 1.25% and 1.5%. The tests were carried out at a concrete age of 15 days. The compressive strength and tensile strength of concrete samples were studied using the method of optical microscopy. The optimal content of fiber reinforcement with sisal fiber was determined as equal to 1%. The increases in the strength characteristics of the obtained fiber-reinforced concrete samples at the optimal dosage of sisal fiber in an amount of 1% by weight of cement were 22% for compressive strength, 27% for axial compressive strength, 33% for tensile strength in bending and 29% for axial strength stretching. The increases in deformation characteristics were 25% for strains in axial compression, 42% for strains in axial tension and 15% for the elastic modulus.