Güneş enerjisinden faydalanma potansiyeli açısından ülkemizin avantajlı olduğu bilinmektedir. Ülkenin gelişmesi ile beraber artan nüfus ve sanayi sektörünün enerji tüketimi de artmaktadır. Bu sebeple enerji ihtiyacının yenilenebilir enerji kaynaklarından olan Güneş Enerjisi Santralleri (GES) ile elde edilmesi zorunlu hale gelmektedir. Güneş enerjisinden faydalanma potansiyeli bakımından Akdeniz bölgesinde Antalya’dan sonra ikinci sırada yer alan Burdur ilinde GES yatırım alanlarının belirlenmesi çalışmaları önem arz etmektedir. Bu çalışmada uzaktan algılama, Coğrafi Bilgi Sistemleri (CBS) ve Analitik Hiyerarşi Prosesi (AHP) metodu kullanılarak Burdur ilinin potansiyel GES yatırım alanları belirlenmiştir. Çalışma sonucunda Burdur Merkez ilçesinden Gölhisar ilçesine kadar uzanan KD-GB hat boyunca, Ağlasun, Çeltikçi ve Bucak ilçelerinde KD-GB hat boyunca ve Yeşilova ilçesinde yaklaşık K-G hattı boyunca uygun alanlar belirlenmiştir. Türkiye Güneş Enerjisi Potansiyeli Atlasında (GEPA) toplam güneş radyasyonu en yüksek ilçe olan Altınyayla ilçesi bu çalışmada GES yatırımı için en az uygun alanların olduğu ilçe olarak belirlenmiştir.

The current study sought to investigate the physiochemical conditions and fluid evolution within the Yolindi Cu-Fe skarn mineralization located in the Biga Peninsula, NW Turkey. This was accomplished through a comprehensive investigation of geological and mineralogical data, along with isotopic analyses of sulfur (δ³⁴S), carbon (δ¹³C), and oxygen (δ¹⁸O) of sulfide and calcite minerals, respectively, as well as fluid inclusion data pertaining to various minerals (e.g., andradite, quartz, and calcite). The Yolindi area features a complex geological framework, including the Paleozoic Kalabak Group (which includes the Torasan, Yolindi, and Sazak formations) and the Triassic Karakaya Complex. These formations were subsequently intruded via Early Miocene Şaroluk granitoids and Hallaçlar volcanics. Skarn formation is zoned into endoskarn and exoskarn types (being categorized into proximal, intermediate, and distal zones), with distinct mineral assemblages indicating concentric and contact metamorphic alteration patterns around the western part of Şaroluk granitoid intrusion in contact with the Torasan formation. The ore mineralogy and paragenesis suggest three distinct stages of evolution: an initial phase of prograde metasomatism characterized by the formation of magnetite and pyrite alongside anhydrous calc-silicate minerals; a subsequent phase of retrograde alteration marked by the formation of epidote, actinolite, and scapolite, accompanied by the occurrence of chalcopyrite and specular hematite; and finally, a post-metasomatic stage involving oxidation processes that led to the development of secondary mineral assemblages containing cerussite, covellite, and malachite. Sulfur isotopes (δ³⁴S) of sulfides from endoskarn (from +0.27 to +0.57‰_VCDT) to intermediate exoskarn (from −9.44 to −5.46‰_VCDT) zones indicate a diverse sulfur source, including magmatic, sedimentary, and possibly organic matter. δ³⁴S values in hydrothermal fluids suggest a magmatic–hydrothermal origin, with endoskarn and proximal zone fluids showing a slight negative signature and intermediate zone fluids indicating a strong influence from organic-rich or metamorphic sulfur reservoirs. Carbon and oxygen isotopic compositions (δ¹³C and δ¹⁸O) of calcite revealed a progression from marine carbonate signatures in marble samples (from +1.89 to +2.23‰_VPDB; from +21.61 to +21.73‰_VSMOW) to depleted values in prograde (from −6.0 to +0.09‰_VPDB; from +6.22 to +18.14‰_VSMOW) and retrograde skarns (from −3.8 to −2.25‰_VPDB; from +0.94 to +3.62‰_VSMOW), reflecting interactions with high-temperature magmatic fluids and meteoric water mixing. The fluid inclusions in prograde minerals generated under the conditions of fluid boiling exhibited high temperatures, reaching up to 412 °C, and salinities up to 26 wt.% NaCl equivalent. Conversely, the fluid inclusions in retrograde minerals, which were generated due to fluid mixing, exhibited lower temperatures (with an average of 318 °C) and salinities with an average of 4.9 wt.% NaCl equivalent. This indicated that the cooler and more diluted fluids mix with meteoric waters and interact with organic materials in the host rocks. This suggests a multifaceted origin involving various sources and processes. Therefore, this study concluded that the skarn mineralization in the Yolindi area resulted from complex interactions between magmatic, metamorphic, and meteoric fluids, reflecting a dynamic ore-forming environment with implications for the regional metallogeny of Cu-Fe skarn deposits.

The current work investigates the impact of magmatic fluids and metasomatic processes on the Yolindi Cu-Fe skarn deposit in the Biga Peninsula, Turkey. It traces the stages of skarn evolution, from prograde to retrograde alterations, and investigates findings within a broader geological, mineralogical, and geochemical framework. Additionally, it assesses the evolutionary history of the Yolindi deposit in relation to calc-alkaline magmatic activity in an island-arc environment and compares its mineral compositions and genesis with other global and regional Cu-Fe skarn deposits. The Yolindi Cu-Fe skarn deposit in the Biga Peninsula was formed by the intrusion of Şaroluk quartz monzonite pluton into Upper Paleozoic Torasan Formation rocks such as phyllite, schists, hornfels, marble, and serpentinites. During skarnification, reactions between the magmatic fluids from the Şaroluk quartz monzonite pluton and the Torasan Formation produced skarn minerals associated with metals such as Fe and Cu. Initially, these reactions formed prograde skarn minerals such as augite-rich pyroxenes and andradite garnets with magnetite and pyrite. As the system cooled, these initial minerals underwent retrograde alteration, leading to the formation of minerals such as epidote, actinolite, and chlorite, as well as other copper and iron minerals including chalcopyrite, bornite, secondary magnetite, and specular hematite. Therefore, four main stages influenced the formation of the Yolindi Cu-Fe deposit: metamorphic bimetasomatic, prograde metasomatic, and retrograde metasomatic stages. Later, oxidation and weathering resulted in supergene minerals such as cerussite, malachite, and goethite, which serve as examples of the post-metamorphic stage. The mineralogical shifts, such as the andradite–grossular transition, reflect changing hydrothermal fluid compositions and characteristics due to the addition of meteoric fluids. Importantly, the formation of magnetite after garnet and clinopyroxene during the retrograde stage is evidenced by magnetite crystals within garnet. The mineral associations of the Yolindi Cu-Fe skarn deposit align with the global skarn deposits and specific Turkish skarns (e.g., Ayazmant Fe-Cu and Evciler Cu-Au skarn deposits). The Yolindi Cu-Fe skarn deposit, in association with ore-bearing solutions having magmatic origins, developed in an island-arc setting.

This study investigates the mineral chemistry and iron isotope composition of the Pertek Fe-skarn deposit in the Eastern Taurides, Turkey, to elucidate skarn formation and ore genesis through chemical and isotopic parameters. The deposit consists of substantial and dispersed magnetite ores formed by the intrusion of a dioritic suite into marbles. Mineral assemblages, including hematite, goethite, andradite garnet, hedenbergite pyroxene, calcite, and quartz, exhibit compositional variations at different depths within the ore body. Magnetite is commonly associated with hematite, goethite, garnet, pyroxene, calcite, and quartz. Extensive LA–ICP–MS analysis of magnetite chemistry reveals elevated trace element concentrations of titanium (Ti), aluminum (Al), vanadium (V), and magnesium (Mg), distinguishing Pertek magnetite from low-temperature hydrothermal deposits. The enrichment of Ti (>300 ppm) and V (>200 ppm), along with the presence of Al and Mg, suggests formation from high-temperature hydrothermal fluids exceeding 300 °C. Discriminant diagrams, such as Al+Mn versus Ti+V, classify Pertek magnetite within the skarn deposit domain, affirming its medium- to high-temperature hydrothermal origin (200–500 °C), characteristic of skarn-type deposits. Magnetite thermometry calculations yield an average formation temperature of 414.53 °C. Geochemical classification diagrams, including Ni/(Cr+Mn) versus Ti+V and TiO₂-Al₂O₃-MgO+MnO, further support the skarn-type genesis of the deposit, distinguishing Pertek magnetite from other iron oxide deposits. The Fe-skarn ore samples display low total REE concentrations, variable Eu anomalies, enrichment in LREEs, and depletion in HREEs, consistent with fluid–rock interactions in a magmatic–hydrothermal system. The δ⁵⁶Fe values of magnetite range from 0.272‰ to 0.361‰, while the calculated δ⁵⁶Fe_aq values (0.479‰ to 0.568‰) suggest a magmatic–hydrothermal origin. The δ⁵⁷Fe values (0.419‰ to 0.530‰) and the calculated 10³lnβ value of 0.006397 indicate re-equilibration of the magmatic–hydrothermal fluid during ore formation.

The present study assesses the influence of thermal imaging defect detection on the energy efficiency of a 1.6 MW solar power facility in the Bağyurdu Organized Industrial Zone (OIZ) in İzmir, Turkey. Thermal imaging has demonstrated efficacy in detecting serious problems in photovoltaic (PV) panels, including hot spots, inoperative modules, faulty connections, and shadowing, which substantially impact system performance. A comprehensive investigation revealed that around 15% of the photovoltaic panels displayed defects, resulting in a 16% decrease in system performance and an estimated yearly energy loss of 0.35 GWh. The study emphasizes the benefits of thermal imaging compared to conventional fault detection techniques, including its capacity for swift and non-invasive identification of localized overheating, which may lead to fires, and its ability to discern fluctuations in energy output due to shading or malfunctioning modules. The results underscore the necessity for routine thermal evaluations and maintenance to guarantee photovoltaic systems’ operational efficacy and dependability. This study enhances the sparse data on large-scale photovoltaic systems in Türkiye and illustrates the effectiveness of thermal imaging as an economical and accurate diagnostic instrument. Future studies should amalgamate thermal imaging with sophisticated diagnostic techniques, like electroluminescence testing and machine learning, to augment fault detection precision and optimize photovoltaic system efficacy.