Cetin Karakaya

Dr. Cetin Karakaya

orcid

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 July 2025 in Polymers
Verified
Journal Article
Open access
PDF file
SESeçil Ekşi
Seçil Ekşi
Cetin KarakayaCetin Karakaya
Cetin Karakaya
This study investigates the influence of key fused deposition modeling (FDM) process parameters, namely, print speed, infill percentage, layer thickness, and layer width, on the tensile properties of PLA specimens produced using 3D printing technology. A Taguchi L9 orthogonal array was employed to design the experiments efficiently, enabling the systematic evaluation of parameter effects with fewer tests. Tensile strength and elongation at break were measured for each parameter combination, and statistical analyses, including the signal-to-noise (S/N) ratio and analysis of variance (ANOVA), were conducted to identify the most significant factors. The results showed that infill percentage significantly affected tensile strength, while layer thickness was the dominant factor influencing elongation. The highest tensile strength (47.84 MPa) was achieved with the parameter combination of 600 mm/s print speed, 100% infill percentage, 0.4 mm layer thickness, and 0.4 mm layer width. A linear regression model was developed to predict tensile strength with an R2 value of 83.14%, and probability plots confirmed the normal distribution of the experimental data. This study provides practical insights into optimizing FDM process parameters to enhance the mechanical performance of PLA components, supporting their use in structural and functional applications.

1 January 2022 in Open Chemistry
Verified
Journal Article
Open access
PDF file
Cetin KarakayaCetin Karakaya
Cetin Karakaya
Perforated sheets are used in many areas due to their high specific load, economical production, aesthetic structure, and filtering ability. Their use in industrial machinery and the construction industry can be given as examples of these areas. In this study, the mechanical behaviour of perforated metal sheets under tensile loads has been investigated numerically. The influence of material type, hole geometry, and hole arrangement were examined with finite element analyses. Stainless steel and aluminium materials are used as sheet materials. The hole geometries are circle, ellipse, triangle, square, and hexagon. As a result of the simulations, the aluminium material gave the highest values in terms of carried load capacity and absorbed energy. The sheets with the staggered hole arrangement have higher load and energy values than the sheets with the linear arrangement. The elliptical perforated aluminium sheet provided the highest load value of 28,386 N in the staggered arrangement. In both hole arrangements, the elliptical perforated sheet gave the highest load value, while the triangle perforated sheet gave the lowest load value. The elliptical perforated sheet with linear hole arrangement provided the highest values in terms of specific load (435.57 N/g) and specific energy (0.27 J/g).

1 March 2022 in Emerging Materials Research
Verified
Journal Article
Closed access
Cetin KarakayaCetin Karakaya
Cetin Karakaya
SESeçil Ekşi
Seçil Ekşi
In this study, three-point bending tests were simulated to investigate the bending behaviours of honeycomb sandwich panels. The sandwich panels used in the study consisted of aluminium alloy skins and cast polyamide honeycomb core. The collapse mechanism and effects of the structural parameters of panels were investigated. The structural parameters of a honeycomb panel are foil thickness, height of core and length of cell. According to the finite element analysis results, as the foil thickness and core height of sandwich panel increase, the load-carrying capacity of the sandwich panel increases. As the length of cell edge increases, the maximum load value decreases. According to the analysis of variance test results, the most important parameter affecting the bending behaviour honeycomb panel is the height of the core (34%). The second factor is foil thickness (30.5%). The influence of the cell edge is lower than other parameters (27.2%).

14 May 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Cetin KarakayaCetin Karakaya
Cetin Karakaya
SESeçil Ekşi
Seçil Ekşi
Springback is the most fundamental problem in all sheet metal-forming processes. Springback is affected by many process variables, and material properties are at the forefront of these variables. This study investigated the effects of the forming process at elevated temperature, bending radius, bending angle, and sheet metal thickness on the springback properties of AA 7075 aluminum alloy sheet metal with finite element analyses. The effects of process parameters on springback and maximum load are investigated using ANOVA analyses. The results show that the bending radius is the most effective on springback (45.2%). Metal thickness is the second critical parameter for springback (28.1%). The third most important factor is the process temperature (19.9%). Metal thickness (84.21%) is the most effective parameter on the maximum load. The bending angle is the second most important parameter (6.88%).

1 March 2022 in Emerging Materials Research
Verified
Journal Article
Closed access
SESeçil Ekşi
Seçil Ekşi
Cetin KarakayaCetin Karakaya
Cetin Karakaya
AÖAhmed Ozan Örnekci
Ahmed Ozan Örnekci
In this study, hole tolerances were investigated by creating holes on 6061-T6 Aluminium and 100Cr6 Bearing Steel in the CNC plasma machine. Holes with diameters of 4, 6.5 and 9 mm were cut circularly in the plates of 3, 6 and 10 mm thickness. The experiments were carried out at three different cutting speeds. Delamination factor, circularity error and taper values were measured. The amounts of burrs formed as a result of circular cut were investigated. For the same plate thickness and hole diameter, as the cutting speed increased, the delamination factor did not change much, but the circularity error and taper values increased. It was observed that the difference between the inlet and outlet diameters decreased as the plate thickness increased. This reduced the circularity error and taper. As the cutting speed increased, the delamination factor, circularity error and taper values increased. As a result of the regression and variance analysis, it was seen that the most important effect on the hole quality was the cutting speed. It has also been observed that the hole quality of 100Cr6 Bearing Steel was better than 6061-T6 Aluminium alloy.

1 June 2022 in Konya Journal of Engineering Sciences
Verified
Journal Article
Closed access
PDF file
SESeçil Ekşi
Seçil Ekşi
Cetin KarakayaCetin Karakaya
Cetin Karakaya
One of the most common methods of machining is turning. Cutting speed, depth of cut, and feed rate are the most effective cutting parameters on the surface roughness. In addition to cutting parameters, the use of cooling type, the cutting tool is also essential on the surface roughness of materials. In this study, the surface roughness properties of Al 6013-T6 material were investigated depending on feed rate and cutting speed in turning process. Experiments were planned according to L9 orthogonal array. Optimum conditions were found via Taguchi’s Signal/Noise analysis. Variance analysis (ANOVA) was performed to determine the parameters that affect the turning process. As a result of experimental studies surface roughness values increased as feed rate increased and decreased as cutting speed increased. The analysis results showed that feed rate is a dominant parameter on surface roughness. It was also observed that the cutting parameters had a significant effect on the machining time. As the machining time decreases, the surface roughness increases.