Fiber-optic-based distributed acoustic sensors (DAS) are a new technology that can be deployed in a well and are continuously interrogated during operations. These sensors measure the strain (or strain rate) at all points along the fiber and have been used extensively to monitor hydraulic stimulations. The data from these sensors indicate that they are sensitive to high-frequency signals associated with microseismicity and low-frequency signals associated with fracture growth. We have developed a set of idealized models to simulate these signals and to identify interpretation methods that may be used to estimate fracture location, geometry, and extent. We use a multiphysics code that includes rock physics, fluid flow, and elastic-wave propagation to generate synthetic DAS measurements from a set of simple models that mimic hydraulic fracturing. We then relate the signals observed in the synthetic DAS to specific features in the model such as fracture height, width, and aperture. Our results demonstrate that the synthetic DAS measurements may be used to interpret field DAS measurements and to optimize the design of future sensor deployments for sensitivity to fracture attributes.
10 October 2024 in Journal of Open Source Software
This paper describes a new modeling framework for microscopic to reservoir-scale simulations of hydraulic fracturing and production. The approach builds upon a fusion of two existing high-performance simulators for reservoir-scale behavior: the GEOS code for hydromechanical evolution during stimulation and the TOUGH+ code for multi-phase flow during production. The reservoir-scale simulations are informed by experimental and modeling studies at the laboratory scale to incorporate important micro-scale mechanical processes and chemical reactions occurring within the fractures, the shale matrix, and at the fracture-fluid interfaces. These processes include, among others, changes in stimulated fracture permeability as a result of proppant behavior rearrangement or embedment, or mineral scale precipitation within pores and microfractures, at µm to cm scales. In our new modeling framework, such micro-scale testing and modeling provides upscaled hydromechanical parameters for the reservoir scale models. We are currently testing the new modeling framework using field data and core samples from the Hydraulic Fracturing Field Test (HFTS), a recent field-based joint research experiment with intense monitoring of hydraulic fracturing and shale production in the Wolfcamp Formation in the Permian Basin (USA). Below, we present our approach coupling the reservoir simulators GEOS and TOUGH+ informed by upscaled parameters from micro-scale experiments and modeling. We provide a brief overview of the HFTS and the available field data, and then discuss the ongoing application of our new workflow to the HFTS data set.
Detecting underground voids, such as old mine workings, solution cavities in karst terrain, or unknown tunnels such as illicit cross-border tunnels, is a challenging problem for geophysics and an important concern for geotechnical design, public safety, and domestic security. Seismic surface-wave-based detection methods have become increasingly popular for detecting relatively shallow and small targets; however, the theoretical limitations of these methods have thus far remained unclear. We use a suite of 3D numerical simulations inspired by a tunnel detection experiment carried out at the Black Diamond Mines Regional Preserve (BDM) in northern California. The geophysical anomalies predicted by our numerical simulations at BDM agree with field observations, and our estimates for the location of the primary tunnel target agree with historical records in the area. Using our calibrated numerical model, we perform a parametric study to determine the effect of tunnel size, depth of burial, filling material, and source characteristics to determine the range over which surface-wave backscattering and attenuation-based methods are effective. In addition, we perform a regression analysis to determine a relationship for the maximum depth at which a tunnel may be detected via these approaches, given the target diameter, wavelength of interest, and the signal-to-noise ratio.
The analysis of microseismic events is one of a few tools available for characterizing processes that occur within the subsurface. We have developed a method for modeling microseismic activity in the subsurface that allows us to model microseismic events at the reservoir scale. By embedding this method in a fully coupled hydromechanical numerical code, we simulate the development of hydraulic fractures in an unconventional reservoir with an explicitly represented discrete fracture network for a relatively simple synthetic model and a more complicated model based upon field observations. The results demonstrate that the model can be effectively calibrated against measured microseismic activity, and it can be used to make predictions regarding the timing, location, and amplitude of events in the subsurface.