Xu Yang

Dr. Xu Yang

China University of Mining & Technology
orcid

Research Focus & Metrics

Academic Career Length

18Years (2009-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 June 2021 in IEEE Internet of Things Journal
Verified
Journal Article
Closed access
YYYuqing Yin
Yuqing Yin
Xu YangXu Yang
Xu Yang
JXJie Xiong
Jie Xiong
Sunghoon Ivan LeeSunghoon Ivan Lee
Sunghoon Ivan Lee
PCPengpeng Chen
Pengpeng Chen
Qiang NiuQiang Niu
Qiang Niu
Respiration rate is an essential vital indicator for health monitoring. While traditional sensor-based methods support acceptable sensing performance, the recent advance in wireless sensing could enable sensor-free and contact-free respiration sensing, which is particularly important during the practice of social distancing against a pandemic like COVID-19. Among a variety of wireless technologies employed for respiration sensing, Wi-Fi-based solutions are most popular due to the pervasive development of infrastructure. However, the existing Wi-Fi-based approaches need to retrieve Wi-Fi readings from access points, which are not often accessible for the end users. In this article, we propose a novel system, MoBreath, in which we utilize the Wi-Fi channel state information (CSI) readings extracted from the end-user device, a smartphone, to monitor the respiration rate for the first time. We introduce and address unique technical challenges, such as selecting the optimum CSI subcarriers from many noisy candidates and providing smartphone placement strategies for both single and multiple human target scenarios based on the Fresnel zone model to support highly accurate respiration sensing. Our evaluation of MoBreath using commodity smartphones in different environments shows that it can accurately estimate the respiration rate at a low error rate of 0.34 breaths per minute and support the sensing range of up to 3–4 m. Even for challenging scenarios such as the target is covered by a quilt and multiple targets are in the sensing area, MoBreath can still support highly accurate results.

14 February 2020 in IEEE Access
Verified
Journal Article
Open access
PLPeihao Li
Peihao Li
Xu YangXu Yang
Xu Yang
YYYuqing Yin
Yuqing Yin
SGShouwan Gao
Shouwan Gao
QNQiang Niu
Qiang Niu
Indoor localization of smartphones has received much attention recently and the smartphone localization is essential to a wide range of applications in office buildings, nursing homes, parking lots, and other public places. Existing solutions relying on inertial sensors or received signal strength suffer from large location errors and poor stability. We observe an opportunity in the recent trend of increasing numbers of wireless transmitters installed in indoor spaces to design a precise and robust indoor localization solution. We can extract fine-grained channel state information from wireless transmitters for indoor fingerprint localization. However, the accuracy of localization relying on a single physical quantity is limited and difficult to self-correct. This study proposes an integrated channel state information (CSI) and magnetic field strength (MFS) localization method (CSMS) that achieves sub-meter accuracy for smartphones. CSMS constructs an integrated fingerprint map of CSI and MFS and proposes the Local Dynamic Time Warping algorithm for geomagnetic tracking and the Multi-Module Data k-Nearest Neighbor algorithm for fusion fingerprint dynamic weighted comparison. By doing so, CSMS outputs enhanced accuracy with low cost, while overcoming the respective drawbacks of each individual sub-system. We conduct extensive experiments in two scenarios to validate the performance of CSMS. The results of experimental show that the mean distance error in both scenarios is less than 0.5m which is significantly superior to existing smartphone-based indoor positioning methods.

23 March 2022 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
MPmingzhi pang
mingzhi pang
GSGang Shen
Gang Shen
Xu YangXu Yang
Xu Yang
kuiyuan zhangkuiyuan zhang
kuiyuan zhang
PCPengpeng Chen
Pengpeng Chen
GWGuofa Wang
Guofa Wang
Visible light technology shows great potential in the underground mine positioning today. Most visible light-based underground positioning technology deploy the receiver, such as photodiodes (PDs), on the mine tunnel ground and consider the miner’s lamp on the ceiling as the transmitter. This incurs the unreliable reception of visible light signals and the difficult implementation of VLP systems due to the complex underground mine environment, such as the receiver being obscured or trampled by objects (e.g., Minecarts and Ore). We present a reliable underground positioning algorithm with visible light considering the actual mine environment. The key innovation is that we design a novel reverse mechanism, i.e., utilizing the existing miner’s headlamp as the transmitter for broadcasting the specific light beacon representing the mine’s identity information, and the PDs deployed on the ceiling of the mine tunnel as the receiver for optical signal reception. We can infer the current locations of all miners using a series of base stations constructed by PDs. If some special mine environment limits the large-scale deployment of base stations and causes the positioning blind spots, the inertial navigation is combined to achieve all miners’ real-time positioning. We overcome some technical challenges for this new mechanism and the underground mine environment, such as optimal frequency selection, robust frequency identification, and accurate base station positioning. We conduct extensive experiments on our algorithm in a simulated mine tunnel, and the experimental results verify that our algorithm exhibits good performance.

1 March 2018 in Electronics Letters
Verified
Journal Article
Open access
PDF file
Xu YangXu Yang
Xu Yang
PCPengpeng Chen
Pengpeng Chen
SGShouwan Gao
Shouwan Gao
QNQiang Niu
Qiang Niu
Wireless multimedia sensor networks (WMSNs) have been proposed for use in many challenging applications, such as military surveillance, wildlife tracking, and security monitoring. Reducing energy and storage space consumption are challenging in WMSNs. To address this issue, the authors propose a novel low‐duty‐cycle WMSN (LWMSN) based on Wi‐Fi. This special WMSN is especially suitable for security monitoring, which involves long invalid times in which humans do not appear in the target area. The LWMSN can be intelligently switched on and off by human detection based on channel state information provided by Wi‐Fi products. The authors evaluated their design with a simulation and an experiment. Results show that the accuracy of human detection can be >97% on average. In addition, energy and storage space consumption are reduced by 53 and 40%, respectively.

13 December 2019 in IEEE Access
Verified
Journal Article
Open access
PCPengpeng Chen
Pengpeng Chen
FLFen Liu
Fen Liu
SGShouwan Gao
Shouwan Gao
PLPeihao Li
Peihao Li
Xu YangXu Yang
Xu Yang
Qiang NiuQiang Niu
Qiang Niu
Indoor localization technology plays an important role in many indoor application scenarios. Existing WiFi-based indoor localization methods mainly obtain channel state information (CSI) through the personal computer, or obtain coarse-grained received signal strength (RSS) through the smartphone to finish the localization. Little work has been done on using smartphones to obtain fine-grained channel state information for localization. In this paper, we use the smartphone to collect fine-grained CSI that is more convenient and applicable, and propose a indoor fingerprinting localization. Compared with the CSI collected by the computer, the CSI signal collected by the smartphone fluctuates greatly. Hence, we corrects the CSI data through the signal processing technique and selects optimal subcarriers to obtain more stable and effective signals. In order to cope with the noisy WiFi environment, the Density-Based Spatial Clustering of Applications with Noise (DBSCAN) method is used to remove abnormal sample points to reduce environmental interference. Moreover, the support vector machine multi-classification method is used for training and classification to achieve localization. Finally, we use the Google Nexus 5 smartphone to conduct experiments in two typical indoor environments. The localization accuracy is 91% and 86%, respectively, and both average localization errors are less than 0.5m. Experimental results show that the proposed algorithm has higher localization accuracy compared with the typical algorithms.

29 February 2024 in IEEE Transactions on Geoscience and Remote Sensing
Verified
Journal Article
Closed access
SLSen Li
Sen Li
Xu YangXu Yang
Xu Yang
Anye CaoAnye Cao
Anye Cao
CWChangbin Wang
Changbin Wang
YLYaoqi Liu
Yaoqi Liu
Qiang NiuQiang Niu
Qiang Niu
Seismograms, the fundamental seismic records, have revolutionized earthquake research and monitoring. Recent advancements in deep learning have further enhanced seismic signal processing, leading to even more precise and effective earthquake monitoring capabilities. This paper introduces a foundational deep learning model, the Seismogram Transformer (SeisT), designed for a variety of earthquake monitoring tasks. SeisT combines multiple modules tailored to different tasks and exhibits impressive out-of-distribution generalization performance, outperforming or matching state-of-the-art models in tasks like earthquake detection, seismic phase picking, first-motion polarity classification, magnitude estimation, back-azimuth estimation, and epicentral distance estimation. The performance scores on the tasks are 0.96, 0.96, 0.68, 0.95, 0.86, 0.55, and 0.81, respectively. The most significant improvements, in comparison to existing models, are observed in phase-P picking, phase-S picking, and magnitude estimation, with gains of 1.7%, 9.5%, and 8.0%, respectively. Our study, through rigorous experiments and evaluations, suggests that SeisT has the potential to contribute to the advancement of seismic signal processing and earthquake research.