At laboratory timescales, rock salt samples with different composition and microstructure show variance in steady-state creep rates, but it is not known if and how this variance is manifested at low strain rates and corresponding deviatoric stresses. Here, we aim to quantify this from the analysis of multilayer folds that developed in rock salt over geological timescale in the Ocnele Mari salt mine in Romania. The formation is composed of over 90 % of halite, while distinct multiscale layering is caused by variation in the fraction of impurities. Regional tectonics and mine-scale fold structure are consistent with deformation in a shear zone after strong shearing in a regional detachment, forming over 10 m scale chevron folds of a tectonically sheared sedimentary layering, with smaller folds developing on different scales in the hinges. Fold patterns at various scales clearly indicate that during folding, the sequence was mechanically stratified. The dark layers contain more impurities and are characterised by a more regular layer thickness compared to the bright layers and are thus inferred to have higher viscosities. Optical microscopy of gamma-decorated samples shows a strong shape-preferred orientation of halite grains parallel to the foliation, which is reoriented parallel to the axial plane of the folds studied. Microstructures indicate dislocation creep, together with extensive fluid-assisted recrystallisation and strong evidence for solution–precipitation creep. This provides support for linear (Newtonian) viscous rheology as a dominating deformation mechanism during the folding. Deviatoric stress during folding was lower than during shearing in the detachment at around 1 MPa. We investigate fold development on various scales in a representative multilayer package using finite-element numerical models, constrain the relative layer thicknesses in a selected outcrop, and design a numerical model. We explore the effect of different Newtonian viscosity ratios between the layers on the evolving folds on different scales. By comparing the field data and numerical results, we estimate that the effective viscosity ratio between the layers was larger than 10 and up to 20. Additionally, we demonstrate that the considerable variation of the layer thicknesses is not a crucial factor to develop folds on different scales. Instead, unequal distribution of the thin layers, which organise themselves into effectively single layers with variable thickness, can control deformation on various scales. Our results show that impurities can significantly change the viscosity of rock salt deforming at low deviatoric stress and introduce anisotropic viscosity, even in relatively pure layered rock.

In salt‐detached fold‐and‐thrust belts, contractional modification of salt structures may include decapitation by thrusting, but examples are not well known in the subsurface and undocumented in outcrop. Here we present a surface exposure of an intrasalt, sub‐horizontal shear zone at the boundary between the Tarcău and Subcarpathian nappes in the Romanian Eastern Carpathians. The Mânzălești diapir forms the largest rock salt outcrop in Europe, with unique salt‐karst geomorphology. Numerous wells show that the outcrop is above deep‐seated salt of a precursor salt‐cored anticline or passive diapir whose base is at >3,500 m. Multiscale observations using UAV‐based digital outcrop models, fieldwork, and microstructure analysis show that the outcrop is characterized by sub‐horizontal foliation with isoclinal folds, unlike the subvertical fabric of most Romanian diapirs. The halite is rich in clastic inclusions, with a power‐law size distribution caused by tectonic reworking of originally impure salt. Microstructures show that the halite matrix is strongly deformed by dislocation creep, forming subgrains and dynamically recrystallized grains around large porphyroclasts with piezometry indicating relatively high differential stress of around 4 MPa, at pressures sufficient to suppress dilatancy. The observations are best explained by sub‐horizontal shear generated by an overriding nappe, overprinting an original coarse‐grained salt fabric during decapitation of the salt body.

The Romanian Carpathians are of global importance in salt tectonics because they host the type locality for the term “diapir.” Although there are several historical reviews of worldwide salt tectonics, important aspects of how diapirism has been described and defined in the Romanian Carpathians are missing in these works. Many of these publications are difficult to access, and most are written in Romanian, German, French, or Polish. This paper aims to present in detail the original ideas and to describe the historical development of these concepts. We focus particularly on the work of the outstanding Romanian geologist, Ludovic Mrazec, who defined the folds with piercing core and coined the term diapir.

The Inner Moray Firth Basin (IMFB) forms the western arm of the North Sea trilete rift system that initiated mainly during the Late Jurassic–Early Cretaceous with the widespread development of major NE–SW-trending dip-slip growth faults. The IMFB is superimposed over the southern part of the older Devonian Orcadian Basin. The potential influence of older rift-related faults on the kinematics of later Mesozoic basin opening has received little attention, partly owing to the poor resolution of offshore seismic reflection data at depth. New field observations augmented by drone photography and photogrammetry, coupled with U–Pb geochronology, have been used to explore the kinematic history of faulting in onshore exposures along the southern IMFB margin. Dip-slip north–south- to NNE–SSW-striking Devonian growth faults are recognized that have undergone later dextral reactivation during NNW–SSE extension. The U–Pb calcite dating of a sample from the synkinematic calcite veins associated with this later episode shows that the age of fault reactivation is 130.99 ± 4.60 Ma (Hauterivian). The recognition of dextral-oblique Early Cretaceous reactivation of faults related to the underlying and older Orcadian Basin highlights the importance of structural inheritance in controlling basin- to sub-basin-scale architectures and how this influences the kinematics of IMFB rifting. Supplementary material: Analytical protocols and analysed sample details are available at https://doi.org/10.6084/m9.figshare.c.5635432

The separation and characterisation of different deformation events in superimposed basins can be challenging due to the effects of overprinting and/or fault reactivation, combined with a lack of detailed geological or geophysical data. This paper shows how an onshore study can be enhanced using a targeted interpretation of contiguous structures offshore imaged by seismic reflection data. Two deformation events, including evidence of fault reactivation, are recognised and associated with the onshore part of the Lossiemouth Fault Zone (LFZ), southern‐central Inner Moray Firth Basin. The basin is thought to record a history of Permian to Cenozoic deformation, but it is difficult to conclusively define the age of faulting and fault reactivation. However, structures in onshore outcrops of Permo–Triassic strata show no evidence of fault growth, and new interpretation of seismic reflection profiles in the offshore area reveals that Permo–Triassic fills are widely characterised by subsidence and passive infill of post‐Variscan palaeotopography. We propose that sequences of reactivated faulting observed onshore and offshore can be correlated and can be shown in the latter domain to be Early Jurassic–Late Cretaceous, followed by localised Cenozoic reactivation. The workflow used here can be applied to characterise deformation events in other superimposed rift basins with contiguous onshore (surface)—offshore (subsurface) expressions.