We live in an environment of ever-growing demand for transport networks, which also have ageing infrastructure. However, it is not feasible to replace all the infrastructural assets that have surpassed their service lives. The commonly established alternative is increasing their durability by means of Structural Health Monitoring (SHM)-based maintenance and serviceability. Amongst the multitude of approaches to SHM, the Digital Twin model is gaining increasing attention. This model is a digital reconstruction (the Digital Twin) of a real-life asset (the Physical Twin) that, in contrast to other digital models, is frequently and automatically updated using data sampled by a sensor network deployed on the latter. This tool can provide infrastructure managers with functionalities to monitor and optimize their asset stock and to make informed and data-based decisions, in the context of day-to-day operative conditions and after extreme events. These data not only include sensor data, but also include regularly revalidated structural reliability indices formulated on the grounds of the frequently updated Digital Twin model. The technology can be even pushed as far as performing structural behavioral predictions and automatically compensating for them. The present exploratory review covers the key Digital Twin aspects—its usefulness, modus operandi, application, etc.—and proves the suitability of Distributed Sensing as its network sensor component.

This paper presents a study on applying satellite Interferometric Synthetic Aperture Radar (InSAR) technology for the remote monitoring of road bridges and interpreting the results from a structural standpoint. The motivation behind this study arises from the widespread deterioration observed in many road bridges worldwide, leading to the need for large-scale, economic, and effective structural health monitoring (SHM) techniques. While traditional contact-type sensors have cost sustainability limitations, remote sensing techniques, including satellite-based InSAR, offer interesting alternative solutions. The objective of this study is three-fold: (i) to process InSAR data specifically for road bridges in operational conditions through the Multi-Temporal InSAR technique and extract displacement time series of reflective targets on their decks; (ii) to interpret the observed millimetric bridge displacements to verify the consistency with expected response to environmental loads and the possibility to detect unexpected behaviours; and (iii) to investigate the correlation between bridge displacements and environmental loads as temperature and river water flow variations. The study focuses on the multi-span prestressed concrete A22 Po River Bridge in Italy, utilising a dataset of X-Band HIMAGE mode Stripmap images acquired over eight years by the satellite constellation COSMO-SkyMed. The study demonstrates the effectiveness of InSAR-based SHM in detecting temperature-induced displacements and identifying different bridge spans simply by studying the sign of the correlation between displacements and temperature variation. It also reveals an unexpected behaviour in a portion of the bridge retrofitted to prevent scour issues a few years before the dataset start date. Furthermore, the correlation between pier displacements and river level variations underscores the importance of considering environmental factors and the geotechnical characteristics of the foundation soils in bridge monitoring. The results obtained from this study are significant with a view to using this satellite InSAR-based monitoring for early detection of anomalous bridge behaviour on a large scale.

The increasing number of bridges approaching their design life has prompted researchers and operators to develop innovative structural health monitoring (SHM) techniques. An acoustic emissions (AE) method is a passive SHM approach based on the detection of elastic waves in structural components generated by damages, such as the initiation and propagation of cracks in concrete and the failure of steel wires. In this paper, we discuss the effectiveness of AE techniques by analyzing records acquired during a load test on a full-size prestressed concrete bridge span. The bridge is a 1968 structure currently decommissioned but perfectly representative, by type, age, and deterioration state of similar bridges in operation on the Italian highway network. It underwent a sequence of loading and unloading cycles with a progressively increasing load up to failure. We analyzed the AE signals recorded during the load test and examined how far their features (number of hits, amplitude, signal strength, and peak frequency) allow us to detect, quantify, and classify damages. We conclude that AE can be successfully used in permanent monitoring to provide information on the cracking state and the maximum load withstood. They can also be used as a non-destructive technique to recognize whether a structural member is cracked. Finally, we noticed that AE allow classifying different types of damage, although further experiments are needed to establish and validate a robust classification procedure.

The number of bridges approaching or exceeding their initial design life has been increasing dramatically. Meanwhile, bridges are withstanding an ever-increasing traffic volume, both in number and weight of vehicles. Analytical and numerical models can predict bridges’ response to traffic loads and their ultimate capacity with low uncertainties; however, such uncertainties increase as bridges age due to deterioration mechanisms. Non-destructive tests of material specimens and full-scale load tests allow for updating structural models and predicting bridges’ responses with higher accuracy. On-site load tests with different load levels provide different information on the bridge behaviour (e.g., elastic response, first-crack load, and ultimate capacity), which impact the model updating differently. This paper compares the observed response of the Alveo Vecchio viaduct, a prestressed concrete (PC) bridge subjected to a controlled load test up to its failure, with its predicted response provided by four structural models. The observed response is measured by an extensive structural health monitoring system, while the structural models are developed with different levels of refinement and uncertainty in the input parameters. This study gives an insight into the ultimate load-carrying capacity of existing PC bridges and their behaviour during a whole load test to failure. The results show that the load-carry capacity of the Alveo Vecchio viaduct is almost four times higher than the design load; likely, many other Italian highway bridges with similar structural characteristics have a similar capacity.

A review of the application of remote sensing technologies in the SHM and management of existing bridges is presented, showing their capabilities and advantages, as well as the main drawbacks when specifically applied to bridge assets. The main sensing technologies used as corresponding platforms are discussed. This is complemented by the presentation of five case studies emphasizing the wide field of application in several bridge typologies and the justification for the selection of the optimal techniques depending on the objectives of the monitoring and assessment of a particular bridge. The review shows the potentiality of remote sensing technologies in the decision-making process regarding optimal interventions in bridge management. The data gathered by them are the mandatory precursors for determining the relevant performance indicators needed for the quality control of these important infrastructure assets.

This paper outlines a logical process based on Bayesian inference to exploit monitoring observations to improve the accuracy in the reliability estimates of civil structures that are retrofitted during their service lives. The proposed approach is particularly effective for complex structures, whose response prediction is affected by structural parameters with significant uncertainty; typical examples are prestressed concrete bridges, heavily influenced by the inherent uncertainties of the material’s creep and shrinkage. The methodology is applied to a real-life complex bridge in Italy, as opposed to academic problems and laboratory tests; the structural model developed for this study includes the original creep law of the Model B3 proposed by Bazant rather than linear approximation or response surfaces. The Bayesian inference is performed using a Markov Chain Monte Carlo (MCMC) method, while the reliability assessment utilises importance sampling (IS) for computational efficiency. The results show the extent to which structural health monitoring (SHM) and Bayesian inference reduce the uncertainty in structural parameters and the prediction of the structural demand. At the same time, they increase structural reliability. Particular attention is given to computational effort, structural modelling and algorithm optimisation.