The vehicle detection process plays the key role in determining the success of intelligent transport management system solutions. The measurement of distortions of the Earth’s magnetic field using magnetic field sensors served as the basis for designing a solution aimed at vehicle detection. In accordance with the results obtained from research into process modeling and experimentally testing all the relevant hypotheses an algorithm for vehicle detection using the state criteria was proposed. Aiming to evaluate all of the possibilities, as well as pros and cons of the use of anisotropic magnetoresistance (AMR) sensors in the transport flow control process, we have performed a series of experiments with various vehicles (or different series) from several car manufacturers. A comparison of 12 selected methods, based on either the process of determining the peak signal values and their concurrence in time whilst calculating the delay, or by measuring the cross-correlation of these signals, was carried out. It was established that the relative error can be minimized via the Z component cross-correlation and Kz criterion cross-correlation methods. The average relative error of vehicle speed determination in the best case did not exceed 1.5% when the distance between sensors was set to 2 m.
12 July 2023 in CAAI Transactions on Intelligence Technology
Initiatives to minimise battery use, address sustainability, and reduce regular maintenance have driven the challenge to use alternative power sources to supply energy to devices deployed in Internet of Things (IoT) networks. As a key pillar of fifth generation (5G) and beyond 5G networks,IoT is estimated to reach 42 billion devices by the year 2025. Thermoelectric generators (TEGs) are solid state energy harvesters which reliably and renewably convert thermal energy into electrical energy. These devices are able to recover lost thermal energy, produce energy in extreme environments, generate electric power in remote areas, and power micro‐sensors. Applying the state of the art, the authorspresent a comprehensive review of machine learning (ML) approaches applied in combination with TEG‐powered IoT devices to manage and predict available energy. The application areas of TEG‐driven IoT devices that exploit as a heat source the temperature differences found in the environment, biological structures, machines, and other technologies are summarised. Based on detailed research of the state of the art in TEG‐powered devices, the authors investigated the research challenges, applied algorithms and application areas of this technology. The aims of the research were to devise new energy prediction and energy management systems based on ML methods, create supervised algorithms which better estimate incoming energy, and develop unsupervised and semi‐supervised approaches which provide adaptive and dynamic operation. The review results indicate that TEGs are a suitable energy harvesting technology for low‐power applications through their scalability, usability in ubiquitous temperature difference scenarios, and long operating lifetime. However, TEGs also have low energy efficiency (around 10%) and require a relatively constant heat source.
19 May 2023 in The International Journal of Advanced Manufacturing Technology
Surface defects of lithium batteries seriously affect the product quality and may lead to safety risks. In order to accurately identify the surface defects of lithium battery, a novel defect detection approach is proposed based on improved K-nearest neighbor (KNN) and Euclidean clustering segmentation. Firstly, an improved voxel density strategy for KNN is proposed to speed up the effect for point filtering. Then, the improved clustering segmentation strategy is applied to distinguish point clouds with defect features. The outline fitting algorithm based on the least square method is applied to determine geometric features of each surface defect which are used to classify defect types. Furthermore, experimental results show that the proposed surface defect detection method reaches 99.2% accuracy and 35.3-ms average time consumption for data processing. Finally, an industrial application example of lithium battery production is demonstrated, which meets the requirements of industrial application. All these reports exhibited that the industrial visual inspection system with rapid measurement is an effective method and guarantees for accelerating industrial production and manufacturing in the future.
8 February 2019 in Wireless Personal Communications
In this article we are investigating whether it is possible to determine non-invasive glucose concentration in blood. With software "Comsol Multiphysics 4.3a" we are simulated environment similar to the human body and choose the most suitable interdigital electrodes. With them we are carry out investigations and measure concentration of glucose in the blood. With this method, the human body will not be injured and not infected with infection it will be psychologically harmless to.DOI: http://dx.doi.org/10.5755/j01.eee.19.6.4566