This review examines recent advances in corrosion inhibitor technologies, with a focus on sustainable and environmentally friendly solutions that address both industrial efficiency and environmental safety. Corrosion is a ubiquitous problem, contributing to massive economic losses globally, with costs estimated between 1 and 5% of GDP in different countries. Traditional inorganic corrosion inhibitors, while effective, are often based on toxic compounds, necessitating the development of more environmentally friendly and non-toxic alternatives. The present work highlights innovative eco-friendly corrosion inhibitors derived from natural sources, including plant extracts and oils, biopolymers, etc., being biodegradable substances that provide effective corrosion resistance with minimal environmental impact. In addition, this review explores organic–inorganic hybrid inhibitors and nanotechnology-enhanced coatings that demonstrate improved efficiency, durability, and adaptability across industries. Key considerations, such as application techniques, mechanisms of action, and the impact of environmental factors on inhibitor performance, are discussed. This comprehensive presentation aims to contribute to updating the data on the development of advanced corrosion inhibitors capable of meeting the requirements of modern industries while promoting sustainable and safe practices in corrosion management.

This study evaluates the corrosion-inhibiting effects of the methanolic (P₁) and the hydroalcoholic (P₂) extracts of the Rhus typhina L. leaves on carbon steel (OL37) in 1 M HCl. Extracts were prepared with microwave-assisted extraction and characterized using HPLC and LC-MS. Electrochemical methods (OCP, EIS, PDP) and surface analyses (SEM, EDX) assessed the performance of both extracts. The results showed that the P₁ and P₂ extracts significantly reduced corrosion rates by forming protective layers on the metal surface, with inhibition efficiencies exceeding 90%, at 1000 ppm concentration, for P₁ (93%), for P₂ at 800 ppm (91%) and 1000 ppm (94%). The P₂ extract demonstrated superior long-term performance, maintaining protection after 96 h of immersion. The extracts function as mixed-type inhibitors, affecting both anodic and cathodic reactions, with physicochemical adsorption demonstrated by the Langmuir isotherm. Overall, the Rhus typhina leaf extracts, particularly the P₂ extract, offer a promising, eco-friendly approach to corrosion prevention in acidic environments.

This study focuses on the evaluation of eco-friendly corrosion inhibitors derived from extracts of Rhus typhina L. leaves, collected in August during the summer season, on OLC45 metal surfaces in a 0.5 M H₂SO₄ corrosive environment. The extracts were obtained using the microwave extraction technique and characterized by HPLC. The protective properties of OLC45 coated with LESRT (leaf extract collected in summer from Rhus typhina L.) were examined by potentiostatic and potentiodynamic polarization procedures and electrochemical impedance spectroscopy (EIS) in 0.5 M H₂SO₄. The application of the Langmuir isotherm revealed high values of the adsorption constant and standard free energies (ΔG°_ads), suggesting a possible mixed adsorption process with an increased tendency toward chemisorption. The influence of temperature on the electrochemical behavior of OLC45 samples in H₂SO₄, both in the absence and presence of two extracts derived from Rhus typhina leaves at a concentration of 1000 ppm, was investigated over the temperature range of 293–333 K. A comparison of the two inhibitors’ effectiveness revealed high inhibitory efficiency, up to 91% at 1000 ppm LESRT₁ (methanol/double-distilled water (50%:50%, v/v)) and 92% for LESRT₂ (ethanol/double-distilled water (50%:50%, v/v)) at 1000 ppm LESRT₂.

This study investigates the efficiency of green corrosion inhibitors derived from spent coffee grounds (SCGs) for OL 37 carbon steel in 0.5 M H₂SO₄ and 1 M HCl environments. The aqueous extracts, labeled K1 and K2, were obtained through specialized extraction techniques and characterized by HPLC. Their protective performance was investigated using potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). FT-IR spectroscopy and SEM-EDX analysis confirmed the presence of a protective inhibitor film on the OL 37 surface, attributed to the adsorption of organic molecules from the SCGs extract (K1 and K2). The adsorption behavior followed the Langmuir isotherm, with high adsorption constants and standard free energy values (ΔG°_ads), indicating a mixed-mode adsorption mechanism. Furthermore, the negative Gibbs free energy values of adsorption confirm the spontaneity of the adsorption process. Thermodynamic studies conducted between 293 K and 333 K demonstrated the temperature dependence of the inhibition process. Results showed that at a concentration of 800 ppm and 1000 ppm, both inhibitors exhibited high efficiency, reaching 96% for K1 and 95% for K2.