A series of computational models and simulations were conducted for determining the dynamic responses of a solid metal projectile impacting a target under a prescribed high strain rate loading scenario in three-dimensional space. The focus of this study was placed on two different modeling techniques within finite element analysis available in the Abaqus software suite. The first analysis technique relied heavily on more traditional Lagrangian analysis methods utilizing a fixed mesh, while still taking advantage of the finite difference integration present under the explicit analysis approach. A symmetry reduced model using the Lagrangian coordinate system was also developed for comparison in physical and computational performance. The second analysis technique relied on a mixed model that still made use of some Lagrangian modeling, but included smoothed particle hydrodynamics techniques as well, which are mesh free. The inclusion of the smoothed particle hydrodynamics was intended to address some of the known issues in Lagrangian analysis under high displacement and deformation. A comparison of the models was first performed against experimental results as a validation of the models, then the models were compared against each other based on closeness to experimentation and computational performance.
This paper describes in detail the background, laboratory setup, and experimental results associated with the mechanical testing and observations of four different Triply Periodic Minimal Surface (TPMS) structures. The purpose of this study is to examine the variation in material mechanical properties through structural design and relative density. The material chosen for this study was Inconel 718, and the TPMS structures were constructed utilizing an M2 Cusing direct metal laser melting additive manufacturing machine. Compressive testing was conducted over one day, following the recommended compression testing procedures outlined in American Society for Testing and Materials (ASTM) E9-19 Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature. These results are to be included in further research aimed at investigating the effects of a hard projectile incorporating an advanced internal structural design impact with a target at high velocities. Abaqus Finite Element software has been used to model the projectile and target, incorporating the Abaqus explicit solver. Advanced material designs will be incorporated into the projectile through an internal metal foam or lattice structure and metal outer shell, and the results compared to a baseline counterpart, evaluating the stress wave propagation through both the projectile and target, deformation of the projectile, damage undertaken by the target, and subsequent stressstrain responses. Finally, the objective of the research is to determine if advanced materials can be incorporated into a projectile to improved penetration depth, as well as impart more energy into the target.