AlSi10Mg is the most widely additively manufactured and commercialized aluminum alloy and has been used in this study to analyze the effect of heat treatment on its microstructure and mechanical properties. Although research indicates AlSi10Mg parts produced by selective laser melting have characteristically very fine microstructures, there is a need for more intensive study to comprehend the effect of heat treatment on the mechanical properties of this alloy by analyzing its microstructure. In this study, AlSi10Mg specimens heat-treated at varying temperatures were analyzed by optical and electron microscopes. Micro-indentation hardness and tensile tests were performed to evaluate mechanical properties while considering the specimen build orientation. Observation shows that it is nearly impossible to completely dissolve the evolved second phase silicon-rich particles, which may have significant effects on the mechanical characteristics. Electron microscopy images show the evolution of iron-rich particles in the Al matrix, which may have a significant influence on the mechanical properties of the alloy.
21 November 2024 in Journal of Materials Engineering and Performance
In this study, AlSi10Mg powder mixed with 2.83 vol% of Yittria Stabilised nano ZrO2 (YSZ) was prepared using ball milling, and the composite parts were fabricated via Laser Powder Bed Fusion (LPBF). The effects of YSZ on the microstructure, grain size, and mechanical properties of AlSi10Mg were systematically investigated to uncover the underlying strengthening mechanisms. The results indicated that the addition of YSZ nanoparticles induce an equiaxed grain structure, promoting microstructural homogeneity, which in turn influences the mechanical properties. The strengthening mechanisms, attributed to dislocation pinning by the nanoparticles as explained by the Orowan strengthening effect, are also discussed. Due to the differences in atomic structure between ZrO2 and AlSi10Mg, the bonding interface effect when nano YSZ is added to the aluminum alloy system is significant and crucial for the material’s mechanical characteristics. This study examines the influence of the bonding interface on the material’s mechanical properties. Tensile results revealed that the predominant mode of failure is ductile fracture, typical for aluminum-based alloys; however, the material failed prematurely due to the presence of lack of fusion pores, indicating a need for optimization of printing process parameters.