Rapid prototyping methods have gained increasing interest across various industries in recent years. Among these methods, 3D printing technology is increasingly used for prototype production, mainly due to its relatively low development and manufacturing costs and the short time required for physical fabrication. This paper presents the integration of 3D printing methods with experimental results as an example of the application of rapid prototyping techniques to examining water jet nozzles. Four different nozzle shapes were investigated. Water nozzle design enables control over the flow stream, its range, and efficiency, tailored to specific requirements. Computational Fluid Dynamics (CFD) was combined with 3D printing to ensure fast answers and to enable a comparison of the proposed solutions. Nozzle prototypes were manufactured using an FDM-based 3D printer and PLA material. The new evaluation criteria coefficient is proposed to calculate the nozzle printing fabrication efficiency.
Condensation on mineral surfaces plays an important role in both natural and industrial environments, especially in the context of protecting sensitive geological formations. This paper presents the results of a new measurement method based on image analysis for non-invasive detection and classification of surface condensation on halite crystals. The presented method allows continuous monitoring of optical changes on the crystal surface in the visible light spectrum and also under natural (in situ) conditions. Based on the experiments carried out using halite samples from the Crystal Caves in the Wieliczka Salt Mine and literature data, four characteristic states of the crystal surface were distinguished. This classification was based on the values of relative humidity: (1) dry state (77.0%), leading to intensive formation of brine solution on its surface. For the halite samples studied, the critical relative humidity (CRH) value was determined to be around 77.0%. The proposed measurement technique allows early detection of the presence of condensate and can be used as a qualitative classifier of the state of surface moisture, which allows automatic assessment of the risk of degradation. This method can find application in the protection of non-living nature reserves and cultural heritage sites, especially in the context of climate change and sustainable management of the underground environment.