Synthesis and antioxidant study of new hydrazones derived from bisdemethoxycurcumin pyrazole

A unique aspect of this research lies in the combination of polyethylene terephthalate (PET) nanofibers with Au^o@PPh₂-PIILP to create a nanogold composite (NGC). This NGC has proven to be highly efficient in removing methylene blue (MB) from wastewater. The prepared nanogold composite NGC was characterized by Fourier-transform infrared spectroscopy (FTIR), Field Emission Scanning Electron Microscopy (FE-SEM), transmission electron microscopy (TEM), Energy Dispersive X-ray Spectroscopy (EDAX), and Elements Distribution Mapping (EDM). Several factors were examined in batch adsorption experiments to determine their impact on dye adsorption. These factors included the initial pH range of four to eight, the dosage of NGC adsorbent ranging from 0.001 to 0.008 g, the initial concentration of MB dye ranging from 10 to 50 mg L⁻¹, and the contact period ranging from 10 to 80 min. It has been observed that NGC is more efficient in removing MB from polluted water. The results of the pseudo-second-order model show good agreement between the calculated adsorption capacity (q_e)_cal. (4.3840 mg g⁻¹) and the experimental adsorption capacity (q_e)_exp. (4.6838 mg g⁻¹) values. Experimental findings suggest a monolayer capping of MB dye on the NGC surface with a maximum adsorption capacity Q_m of 18.622 mg g⁻¹ at 20 °C, indicating that it is well-fitted to the Langmuir isotherm.

In this study, modification of poly(adipic anhydride) through branching its chains was carried out via melt condensation polymerization with D-mannitol. The percentage of mannitol was varied (3, 4, 5, 10, 15, and 20 Wt.%) and the resulting copolymers were purified and characterized by FT-IR and ¹³C-NMR. These analyses indicated that linear chains of poly(adipic anhydride) can react with strong nucleophiles and dissociate to produce highly branched poly(adipic anhydride-co-mannitol adipate) which confirms the validity of the proposed mechanism. The copolymer’s molecular weight characteristics have been also examined using GPC analysis. Thermal properties of copolymers were also investigated using TGA, DTG, and DCS analyses. TGA/DTG revealed that the thermal degradation of copolymers proceeds in multi-stage decomposition, whereas the shift and pattern change of the melting point peak of DSC curves can identify the weight percentage of mannitol for homogenous copolymers. Two non-isothermal models, the Flynn–Wall–Ozawa and Kissinger methods, have been also employed to analyze thermogravimetric data collected from the thermal decomposition of the copolymers and found that Flynn–Wall–Ozawa method provides better results with R² correlation up to 99.3%. The activation energy in the region of T_max was determined and found that an increase in mannitol contents in copolymer has a positive impact on its thermal stability.