Elena Silvestre

Dr. Elena Silvestre

orcid

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 May 2014 in Key Engineering Materials
Verified
Journal Article
Closed access
PDF file
ESElena Silvestre
Elena Silvestre
ESEneko Saenz-De-Argandoña
Eneko Saenz-De-Argandoña
Lander GaldosLander Galdos
Lander Galdos
JMJoseba Mendiguren
Joseba Mendiguren
Roll levelling is a forming process used to remove the residual stresses and imperfections of metal strips by means of plastic deformations. During the process the metal fibres are subjected to cyclic tension-compression deformations leading to achieve flat product. The process is especially important to avoid final geometrical errors when coils are cold formed or when thick plates are cut by laser. In the last years, and due to the appearance of high strength materials such as Ultra High Strength Steels, machine design engineers are demanding a reliable tool for the dimensioning of the levelling facilities. In response to this demand, Finite Element Analysis and Analytical methods are becoming an important technique able to lead engineers towards facilities optimization through a deeper understanding of the process. Aiming to this study two different models have been developed to analyze the roll levelling operations: an analytical model and a finite element model. The FE-analysis was done using 2D-modelling assuming plane strain conditions. Differing settings, leveller configuration and materials were investigated. The one-dimensional analytical levelling model is based on classical beam theory to calculate the induced strain distribution through the strip, and hence the evolving elastic/plastic stress distribution. Both models provide a useful guide to process-sensitivities and are able to identify causes of poor leveller performance. The theoretical models have been verified by a levelling experimental prototype with 13 rolls at laboratory.

1 January 2020 in Procedia Manufacturing
Verified
Journal Article
Open access
AGAitor Garcia
Aitor Garcia
JTJavier Trinidad
Javier Trinidad
NONagore Otegi
Nagore Otegi
JMJoseba Mendiguren
Joseba Mendiguren
EAEneko Saenz de Argandoña
Eneko Saenz de Argandoña
LGLander Galdos
Lander Galdos

13 June 2013 in Key Engineering Materials
Verified
Journal Article
Closed access
PDF file
ESElena Silvestre
Elena Silvestre
JMJoseba Mendiguren
Joseba Mendiguren
Lander GaldosLander Galdos
Lander Galdos
ESEneko Saenz-De-Argandoña
Eneko Saenz-De-Argandoña
After roll forming processes, metallic coils show several flatness imperfections and residual stresses that must be minimized when high quality components are manufactured by means of sheet metal forming processes. The equipments typically used for this purpose are roll leveling facilities. In the present work, a uniaxial cyclic tension-compression test has been used to determine the mechanical response of steel sheet under the different loading modes. After this, the Chaboche and Lemaitre nonlinear mixed hardening model has been fitted to the material behavior. This hardening model is able to reproduce some phenomena which occur during low cyclic deformation such as Bauschinger effect and workhardening. During the fitting of the model, the number of tension-compression cycles performed in the material characterization and the number of backstresses used for the model definition have been analyzed. Finally the influence of the material model in the roll leveling process results has been numerically analyzed. Different simulations have been performed by introducing initial defects with the objective of predicting residual stresses, residual curvatures, leveling force and torque force at the end of the process.

3 May 2018 in AIP Conference Proceedings
Verified
Conference Paper
Closed access
PDF file
Lander GaldosLander Galdos
Lander Galdos
JMJoseba Mendiguren
Joseba Mendiguren
ESEneko Saenz-De-Argandoña
Eneko Saenz-De-Argandoña
NONagore Otegi
Nagore Otegi
ESElena Silvestre
Elena Silvestre
Roll levelling is commonly used in cut to length and blanking lines to flatten initial coils and produce residual stress free precuts. Roll straightener is also used to remove coil-set when progressive dies are used and the starting raw material is a coil. Industrial evidences have proved that roll leveler or straightener tuning is crucial to get a robust process and to obtain repetitive springback values after stamping. This is more relevant when using Advanced High Strength Steels and aluminum coils. However, the mechanisms affecting this material behavior are unknown and how the levelling technology affects the material properties has not been yet reported. In this paper, the influence the roll levelling process has on the final properties of a 6xxx aluminum alloy is studied. For that, as received coils have been relevelled using two different leveler set-ups and tensile tests have been performed using both initial and final material states. Aiming to quantify the effect of the material hardening on a real forming process, a new tangential bending prototype has been developed. As received and levelled precuts have been bent and the forming torques and the postforming angles have been compared.

26 October 2016 in Advances in Materials and Processing Technologies
Verified
Journal Article
Closed access
UHUnai Ulibarri Hernández
Unai Ulibarri Hernández
JMJoseba Mendiguren
Joseba Mendiguren
EAEneko Sáenz de Argandoña
Eneko Sáenz de Argandoña
LGLander Galdos
Lander Galdos
ESElena Silvestre
Elena Silvestre
IGImanol Gil
Imanol Gil
Current numerical optimisation of levelling processes is focused in the calculation of the correct facility setting and the levelling force. The calculation of this last variable is important, even more important for such materials showing high yield strength where facilities could be close to their working limits, for the mechanical construction of the facilities. However, another important process variable which is not estimated yet by numerical simulation is the torque necessary to flatten the material. This value is needed to define the power train of the levelling facilities. The present paper characterises the friction behaviour in roll levelling processes by means of a special tooling constructed at Mondragon Unibertsitatea. The tooling is able to calculate both the static and the dynamic coefficient of friction (COF) between a circular surface, which reproduces the leveller rolls, and a semiflat surface, which reproduces the sheet. In order to reproduce the contact conditions at roll levelling, the special tooling replicates the geometry of roll levelling facilities. The COF is calculated introducing the obtained data from the experimental test in 2D and 3D numerical models. Considering that levelling processes are being optimised with 2D models, the 2D friction model is more adequate for estimating the COF in levelling processes.

10 July 2015 in Key Engineering Materials
Verified
Journal Article
Closed access
PDF file
ESElena Silvestre
Elena Silvestre
EAEneko Sáenz de Argandoña
Eneko Sáenz de Argandoña
Lander GaldosLander Galdos
Lander Galdos
JMJoseba Mendiguren
Joseba Mendiguren
The roll levelling is a forming process used to remove the residual stresses and imperfections of metal strips by means of plastic deformations. The process is especially important to avoid final geometrical errors when coils are cold formed or when thick plates are cut by laser. In the last years, and due to the appearance of high strength materials such as Ultra High Strength Steels, machine design engineers are demanding a reliable tool for the dimensioning of the levelling facilities. In response to this demand, Finite Element Analysis is becoming an important technique able to lead engineers towards facilities optimization through a deeper understanding of the process.In this scenario, the accuracy and quality of the simulation results are highly dependent on the accuracy of the implemented material model. During roll levelling process, the sheet metal is subjected to cyclic tensile-compressive deformations, therefore a proper constitutive. model which considers the phenomena that occurs during cyclic loadings, such as the Bauschinger effec, work hardeningt and the transient behaviour, is needed. The prediction of all these phenomena which affect the final shape of the product are linked to the hardening rule.In the present paper, the roll levelling simulation of a DP1000 steel is performed using a combined isotropic-kinematic hardening formulation introduced by Chaboche and Lemaitre since its simplicity and its ability to predict the Bauschinger effect. The model has been fitted to the experimental curves obtained from a cyclic tension-compression test, which has been performed by means of a special tool developed to avoid the buckling of the specimen during compressive loadings. The model has been fitted using three different material hardening parameter identification methodologies which have been compared.